Kogan ACTIVE+ MINI User manual

ACTIVE+ MINI SMART
WATCH
KAAPMWTCBLA, KAAPMWTCRGA

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this
user guide for future reference.
•Contact your physician before beginning any exercise regime, especially if you have
any blood disease or circulation disorder. The measurement results of this product
are for reference only and are not intended for any medical use or basis.
•If you are wearing a pacemaker or other implanted electronic devices, please consult
your doctor before using the heart rate monitoring strap.
•The device tracks your daily activities through sensors. This data is intended to tell
you about your daily activities, such as steps, sleep, distance, heart rate, and calories,
but may not be completely accurate.
•The device, accessories, heart rate sensors, and other relevant data are designed for
entertainment and fitness, not for medical purposes.
They are not applicable to the diagnosis, monitoring, treatment, or prevention of any
diseases or symptoms. The heart rate data is for reference only. The manufacturer is
not responsible for any consequences caused by any data deviation.
The contents of this guide are accurate at the time of printing. Any future changes to
functions, design, watch firmware, or app software cannot be reflected in this guide. For the
most recent version of this guide, please head to help.Kogan.com.
SAFETY & WARNINGS

Front view
Back view
OVERVIEW
Function button
Magnetic charge contacts
Heart rate sensor

Connect the contact points of the magnetic charging cable to the charge points of the
watch to charge and power it on.
Download and install the "Veryfit" App from App Store (Apple) or Google Play Store
(Android).
Pairing
1. Open the “Veryfit” app and turn on Bluetooth positioning permissions.
2.Enter your personal information, as well as your step and weight goals in the app.
3.Access the "Add Device" page in the app, select the device type you wish to link, and
link the watch model found.
4.Bring the watch close to the phone.
5.When the watch receives the signal, tap “OK” on the watch to link the device.
Health
•Wear the watch for daily activities, and the watch will automatically record relevant
exercise data.
•You can actively measure heart rate, blood oxygen levels, and stress levels using the
watch. You can monitor your health status manually or have the watch continuously
monitor your health automatically.
Start single exercise
•Access the exercise application on the watch, select the icon corresponding to the
exercise type (such as outdoor running), and begin your exercise.
•You may also select a single exercise goal before starting to exercise and then simply
tap “Start” to begin your exercise.
APP INSTALLATION

Charging
Whilst the watch is off, it automatically turns on when you put it on charge. To charge,
attach the supplied magnetic charging cable to the magnetic charging contacts on the
back of the smart watch.
Attach the opposite end of the cable into a USB charging adapter (not supplied). Ensure the
adapter meets the specified voltage and current (5V/500mA).
OPERATION
Notes:
•Ensure the smart watch is charged fully before first use.
•If the device does not turn on within one minute, this is due to the over
discharging protection. Charge the watch for over 30 minutes until it turns on.

How to wear
Make sure that the bottom sensor is lightly in contact with your skin and that there is a gap
of about one finger’s width between the wrist strap and your wrist.
Touch operation
This watch features a full touch screen that supports both “tap” and “tap and hold”
operations:
•Tap once: select and switch.
•Tap and hold: access and confirm.
Button operation
This watch features a function button that supports short press operation:
•Short press: return to the watch face, close alerts, exit program prompts.
Watch face
•The “Veryfit” app comes with several watch faces available for selection. Open the
“Watch Face Market” menu to select from the available watch faces or download
and install more.
•Change the watch faces by entering Settings – Watch Face.

Exercise
There are 14 exercise modes.
Outdoor run Cricket Outdoor cycle Rower
Indoor run Pool Swim Indoor cycle Elliptical
Indoor walk Open Water Swim Hiking Workout
Outdoor walk Yoga
•This watch features an intelligent exercise recognition function and is able to tell if the
user is running or walking. This function can be enabled or disabled in the app.
•The exercise summary includes a variety of exercise data and detailed data can be
viewed in the “Veryfit” app.
•The watch is unable to enter any exercise modes when the battery level is below 10%.
•Through the "VeryFit" app, users can track their exercise path using GPS while in the
following modes:
•Outdoor running
•Outdoor walking
•Outdoor cycling
•Hiking
Ensure the watch is connected to the app during exercise.

Connecting to Third Party Fitness and Strava Apps
Users can sync their exercise data to Google Fit, Apple Health and Strava through the
“Veryfit” app.
1. On the home screen, click the “My” tab click on in the bottom right corner.
2.Click “Settings”
3.Click “Data Sharing and Authorization”.
4.Select the desired app to sync exercise data with.

Application List
On the watch face, press the function button to enter the application interface:
1. Health Data
The watch tracks all of your daily goals (number of steps, calories, distance, active time, and
number of walks achieved) and your hourly progress towards these goals.
2.Exercise Records
You can view your most recent exercise records on the watch, including detailed
exercise data. You can also view the exercise records in the “Veryfit” app.