Kogan ACTIVE PRO GPS ALWAYS-ON DISPLAY SMART WATCH User manual

ACTIVE PRO GPS ALWAYS-ON
DISPLAY SMART WATCH
KATPROGPSWA

Battery warning
Do not disassemble, pierce or damage the battery. Do not disassemble the built-in batteries
of non-replaceable battery devices. Do not use sharp objects to remove the battery.
Health Warning
If you are wearing a pacemaker or other implanted electronic devices, consult your doctor
before using the heart rate monitoring strap.
The watch’s optical heart rate sensor glows green and flashes. If you suffer from epilepsy or
are sensitive to blinking light sources, consult your physician for advice on if you can wear
this product.
The device tracks your daily activities through sensors. This data is intended to tell you
about your daily activities, such as steps, sleep, distance, heart rate and calories, but may
not be completely accurate.
The device, accessories, heart rate sensors and other relevant data are designed for
entertainment and fitness, not for medical purposes. They are not applicable to the
diagnosis, monitoring, treatment or prevention of any diseases or symptoms. The heart rate
data is for reference only. Kogan is not responsible for any consequences caused by any
data deviation.
Notes:
Device data should be synchronised once every seven days to avoid data loss.
The device has no waterproof effect against seawater, acidic or alkaline solutions, chemical
reagents or other corrosive liquids. Any damage or defect caused by misuse or improper use
of the device is beyond the warranty scope. The device supports use under cold showers or
swimming in freshwater, excluding diving.
 In daily use, avoid wearing the strap too tightly around your wrist.
 Keep the parts where the device touches the skin dry.
 During heart rate detection, stand still and keep your arm steady.
SAFETY & WARNINGS

1. Turn On
 The unit will automatically turn on after charging.
 Turn on by pressing and holding DOWN button.
APP INSTALLATION
Note:
The Watch must be charged and activated before the first use. Use only the original
power adapter to charge the watch.

2. Download and Install VeryFitPro
You can directly scan the QR code to download VeryFitPro or
search “VeryFitPro” in the APP store to download and install.
Note: The hardware requirements for connecting to a smart device are shown below.
iOS 9.0 and above Android 4.4 and above Bluetooth 4.2
3. Connect to mobile phone correctly.

4. Bind the Device
Go to the App home page to show the binding request. Select the product model and tap
“Confirm Binding” to complete binding.
The operations are as follows:

1. Instructions
UP Button
Press
In screen locked state: Unlock screen
Sibling interface: Circularly flip
Pop-up interface: Confirm
During stopwatch/timer working:
Pause/Continue
During sports paused: Continue sport
During sports: Pause sports
Other interfaces: Quickly launch sports
Press and hold In screen locked state: Unlock screen
During sports paused: Stop sports
DOWN Button Press
Pop-up interface: Cancel/Close
During stopwatch operation: count
During timer operation:
Stop timekeeping and quit
Other interfaces: Return to previous
interface/dial
Press and hold Turn on/Turn off
OPERATION
Screen
Up button
Down button

2. Operation on Screen
Screen
Tap Select to enter the next interface/select current
item.
Tap and hold Tap and hold in the main dial interface to enter dial
switching interface.
Slide left/right Switch interfaces left and
right.
Slide up/down Switch interfaces up and
down.
3. Operation of Gestures
Raise to turn on backlight. Hang to turn off backlight.
Note:
Activation of this function can be set up through mobile APP.

Sports Function
1. Activate Sports
Enter Sports list interface, slide up or down to select sports item
and tap icon to start sports.
2. Start Sports
When Outdoor Running is activated, the Watch will scan for
GPS signals automatically. You can tap Skip Icon to skip GPS
positioning, but motion trail cannot be displayed prior to
successful positioning. Count-down starts after successful
positioning or after skipping positioning. Start sports after
count-down is over.
3. Operations during Sports
Screen unlocked
Press
UP/DOWN
button to unlock
Screen locked
Press and hold
UP button to
pause sports
Slide left/right
to switch
indicated
sports data

4. Reminders during Sports
During sports, the Watch will continuously detect your current heart rate. If the current heart
rate exceeds the maximum heart rate, the Watch will remind you to reduce sports intensity
or stop sports through vibration and interface alarm. Set your safe heart rate reminder
through More>Heart rate zone>User defined Maximum Heart rate is in the mobile APP.
5. Pause or Stop Sports
Pause sports:
In the unlocked state, press and hold “UP” button to pause sports. Tap continue icon to
resume sports. In the paused state, slide up to view current sports data.
Stop sports
In the paused state, select “STOP” to stop sports. After sports, the Watch will keep details
of the sports. View in sports records.
Other Functions
1. Health Data
Enter Health Data interface to view the accumulated steps, calories
and distances for the day.

2. Notifications
Turn on smart reminder
Enable “Smart Reminder” in the APP, then select and enable notification types to be
reminded. This function requires a constant Bluetooth connection between the Watch and
mobile phone.
View message
When receiving s message, the Watch will vibrate to alert you. If the message is not
immediately viewed after being received, slide down to view the message.
Delete message
The Watch can save the most recent 12 notifications. Beyond this limit, the earliest notice
will be automatically deleted once a new notice is received. When the notification content
exceeds one screen, it will be displayed continuously on the second screen.
 On the message list interface, swipe left on a single message box to show Delete
Icon and tap Delete icon to delete the message.
 Swipe down to the top of message list and tap Clear icon to clear all messages.
3. Heart Rate
The Watch supports heart rate detection. Slide to Heart Rate
Detection interface, hold for two seconds, and the Watch will
automatically detect heart rate. Stand still and keep your arm
steady during the detection so that the Watch can record more
accurate heart rate data.
Note:
To improve the accuracy of heart rate detection, wear the Watch correctly and keep
parts that contact the skin clean.

4. Blood Oxygen
The Watch supports blood oxygen detection. Slide to Blood
Oxygen Detection interface, hold for two seconds, and the
Watch will automatically detect blood oxygen levels. Stand still
and keep your arm steady during the detection so that the
Watch can output more accurate blood oxygen data.
5. Weather
The Weather function allows you to keep track of the weather
in your city. Because weather data is obtained through your
mobile phone network, this function requires a constant
Bluetooth connection between the Watch and mobile phone
for regular weather data updates.
6. More Functions
Compass
The internal gyroscope will require calibration when entering Compass interface for the first
time. Once the calibration is completed, it can be used as normal.
Stopwatch
Allows the recording of multiple lap times.
Note:
 To improve the accuracy of blood oxygen detection, wear the Watch
correctly and keep parts that contact the skin clean.
 Blood oxygen detection can take some time; be patient.
Note:
Calibration can take some time; be patient. To avoid signal interference, stay away
from areas with strong magnetic interference.

Timer
Allows setting a countdown timer. The watch will vibrate once this time has elapsed.
Alarm clock
You can set alarm clocks from the mobile APP.
When it is the set time, the Watch will alert you through vibration. In the case of no
operation after 20 seconds, the alarm clock will automatically stop. After 5 minutes, the
alarm clock will then vibrate again. Press UP/DOWN button to engage the Snooze function,
and after 5 minutes the alarm clock will alert you again. Slide up to turn off alarm reminder.
Call reminder
Enable the Call Reminder function in the mobile APP and keep a constant Bluetooth
connection between the Watch and the phone. When there is an incoming call, the Watch
will alert you through vibration. Close the call pop-up by pressing UP/DOWN button. Slide
up to reject a call.
7. Control Centre
DND (do-not-disturb) mode
Slide up once on the dial interface and enter control centre interface. Tap DND icon to
lighten the icon and enable DND mode. Tap DND icon again to dim the icon and
disable DND mode.
Brightness adjustment
Slide up once on dial interface and enter control centre interface and tap again to cycle
through brightness levels: 2 (default) > 3 > off > 1
System settings
Slide up once on the dial interface and enter control centre interface. Tap System Setting
icon to enter system settings.
In system settings, you can enter:
 Dial settings: Tap and enter this function to switch dials among different styles.
 UP button function settings: Tap and enter this function to set sports style entered
by pressing and holding UP button.
 Factory data reset settings: Tap to enter factory data reset procedure.
 Firmware information: Tap and enter to view firmware information and Bluetooth
address.

Replace watch strap Use a soft brush or clean soft cloth to
clean the Watch.
 Remove the Watch from your wrist and disconnect all connections with other
equipment before cleaning and maintenance.
 Keep the Watch and its accessories dry. Do not dry them with external heating
equipment such as a microwave oven or hair dryer.
 Do not place the Watch or its accessories in an area where the temperature is
excessively high or low, as this may cause malfunction, fire or explosion.
 Avoid strong shock or vibration to prevent damage to the Watch and its
accessories.
 Do not disassemble or modify the Watch and its accessories.
Screen model 1.1" All-reflective wake screen
Battery capacity 260mAh
Working voltage 3.8V
Charging time ≤2 hours, 25
℃
constant temperature
Battery duration 15 days (Battery life depends on usage)
Waterproofing grade 5ATM
Bluetooth version Bluetooth v4.2
Working temperature -20°C-40°C
Product weight 49.2g
Waterproofing Use during hand washing, raining and swimming in shallow water is supported. Use in a hot shower, while
diving, underwater diving, surfing etc. is unsupported.
CLEANING & CARE
SPECIFICATIONS

Problem Solution
Mobile phone cannot be connected to the
Watch.
1. It is recommended to update VeryFitPro to
the latest version.
2. It is recommended to quit all APPs,
reactivate the phone Bluetooth and re-
connect.
3. Confirm that the system of the phone is
Android 4.4 or iOS 9.0 and above.
The Watch has no message or call
reminders.
1. The smart reminder function and call
reminder function must be enabled in the
APP and synchronised to the Watch.
2. The Watch must be paired with your
mobile phone through Bluetooth and
maintaining a constant connection.
Bluetooth disconnects frequently.
1. Excessive distance between the Watch
and the phone may cause Bluetooth
disconnection. Bluetooth connection over 7
metres or more will be significantly weaker.
2. Shielding between the Watch and the
phone will affect the connection. Any
obstruction may also interfere with the
Bluetooth signal, such as metal jewellery.
3. Confirm that Bluetooth function of the
phone is operational.
Disposal:
This marking indicates that this appliance should not be disposed with other
house-hold wastes. To prevent possible harm to the environment or human
health from uncontrolled waste disposal, recycle it responsibly to promote the
sustainable reuse of material resources.
TROUBLESHOOTING

Need more information?
This is a Quick Start Guide, and we hope that this
has given you the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com