Kogan KAPPTMWTCGA User manual

PULSE+ BODY TEMPERATURE
THERMOMETER SMART WATCH
KAPPTMWTCGA, KAPPTMWTCRA, KAPPTMWTCBA & KAPPTMWTCPA

Thank you for buying this Kogan product. Please read all safety instructions before using
your smart watch.
The contents of this guide are accurate at the date of printing. Any future changes to
functions, design, watch firmware or app software cannot be reflected in this guide. For the
most recent version of this guide, please head online to kogan.com
WARNING:
•Contact your physician before beginning any exercise regime, especially if
you have any blood disease or circulation disorder. The measurement
results of this product are for reference only and are not intended for any
medical use or basis.
•If you are wearing a pacemaker or other implanted electronic devices,
please consult your doctor before using the heart rate monitoring strap.
•The watch’s optical heart rate sensor glows green and flashes. If you
suffer from epilepsy or are sensitive to blinking light sources, please
consult your physician if you can wear this smartwatch.
•The device tracks your daily activities through sensors. This data is
intended to tell you about your daily activities, such as steps, sleep,
distance, heart rate and calories, but may not be completely accurate.
•The device, accessories, heart rate sensors and other relevant data are
designed for entertainment and fitness, not for medical purposes.
They are not applicable to the diagnosis, monitoring, treatment or
prevention of any diseases or symptoms. The heart rate data is for
reference only. The manufacturer is not responsible for any consequences
caused by any data deviation.
SAFETY & WARNINGS

•The watch should be charging for at least 2 hours before use.
1. Power on: When the watch is in the off state, press and hold the touch screen for
three seconds to turn it on. The home screen of the watch will be displayed after
booting.
2. Touch screen operation: From the home screen, swipe to the right to the menu
screen, then tap the function icon to enter the corresponding sub-menu.
3. Screen brightness:When the watch is in the state of interest screen, you can
touch the screen brightness option. If the turn button is turned on in the app, the
user can also achieve the bright screen by turning the wrist.
4. Shutdown: Click the Setting icon, click System - Shut down, click to shut down.
OPERATION

Home page navigation
Long press the main interface to
enter the home page thumbnail. You
can view it left and right, click touch
to switch the home page.
Slide to the right: Display function
list. Swipe up and down to navigate
the list, and tap a function to select.
•Daily activity
•Temperature
•Heart rate
•Message
•Sports
•Sleep
•Weather
•Music
•Relax
•Timer
•Find phone
•Settings
Sliding down:
•Date
•Bluetooth
•Timer
•Brightness
•Settings
•Do Not Disturb mode
Slide up:
•Storage information
•Heart Rate Monitoring
•Daily activity
Slide to the left:
•Static icon list.
Click to enter the
corresponding function,
right stroke to return to the
previous level.

Clock Display
Setting method
Power on. When the watch in clock mode, please long press middle screen and set different
clock interfaces if you like.
Setting up phone app
Download and install the "HitFit Pro" App from App Store (Apple) or Google Play Store
(Android).
Connecting Android:
Open HitFit Pro. Select the model watch, then click “Device” from the menu. The Device
Connection screen will scan for available Bluetooth connections. Select the watch from the
list. Click OK, then Pair to bind watch as below.

Connecting iOS:
Open “HitFit Pro” app, “Add device” on “Me” screen to search Bluetooth devices nearby, find
watch name DW-019GT_T and pair it in app. Once DW-019GT_T connected, it will be shown
in the phone's Bluetooth menu screen as below pictures.
Now the Bluetooth menu interface displays DW-019GT_T connected successfully as below
picture shows.

Synchronising data
Once paired with the app, press " " to sync data. Your watch data will be shown on the
app accordingly.
Basic functions
Daily activity
Function introduction: The watch will display the user's total number of steps on the day,
walking distance, calories burned on the same day and the data will be cleared at 0 o'clock
(midnight) every day.
Operation instructions: The main interface slides left and right and clicks the motion data to
switch to the step counter interface. After no operation for 3 seconds, the screen is
automatically turned off.
Sports
In sports mode: the single-point function icon allows you to enter sports modes such as
walking, running, riding, climbing and basketball.
Note:
Do not close the Bluetooth notification when you are clearing apps by background or
closing background application software. It will affect the sync function between watch
and phone if stopped.

Heart rate
Function introduction: The watch will measure the user's heart rate under the heart rate
measurement interface. After the test is completed, the vibration will display the result. After
no operation, the screen will automatically go out.
Operating instructions: To the left on the main interface and click the heart rate static icon to
switch to the heart rate measurement interface. Once the interface is entered, the
measurement will start. During the measurement, the interface value will be zero. After the
measurement is completed, the value will be displayed. If the result cannot be detected, it
will always be displayed. The display value is zero until standby.
Temperature
Function introduction: The watch will measure the user's temperature under the
temperature measurement interface. After the test is completed, the vibration will display
the result. After no operation, the screen will automatically go out.
Operating instructions: Slide to the left on the main interface and click the temperature
static icon to switch to the temperature measurement interface. Once the interface is
entered, the measurement will start. The left data is for Body surface temperature, it is
changed in real time. The right data is for Body temperature, measuring 60s to complete the
measurement. During the measurement, the interface value will be shown “--.-”. After the
measurement is completed, the value will be displayed.
During testing body temperature, environment temperature requires within 18-30°C.

Sleep
Function introduction: The watch will display the user's sleep time the night before. (Sleep
measurement time 21:30 - 12:00 next day)
Operation instructions: Slide the main interface left and right, click sleep to switch to the
sleep interface, you can view the sleep time of the previous day.
Weather
After connected with HitFit Pro, the watch will show local weather.
Message
When connected to Bluetooth, notifications from your phone will be sent to your watch. (You
need to open the push switch in the app in advance)
Music
After connected with the Bluetooth, you can manipulate Mobile to play music and adjust
the volume, voice will come out from mobile phone.
Timer
Swipe left on the main page and click the stop icon static icon to switch to the stopwatch
interface. Click to start timing. During the timing, you can pause/start switching with a
single touch. Slide the stopwatch function to the right of the stopwatch interface and return
to the static function page.

Find phone
When you connect your phone, the phone vibrates and rings when you click the Find Phone
icon.
Relax
Adjust your breathing and relax.
Setting
•Screen display: Including Change dial, Brightness, Screen time, Turn wrist
wake setting.
•Do not disturb: Set enter or exit do not disturb mode.
•Vibration: Set vibration intensity.
•System: Including System version, Shut down, Reset setting.
Device specifications
Model: DW-019GT_T
CPU: RTL8762C ARM Cortex-M0 53MHz
Memory: RAM 128Kb+ ROM 64Mb
Capacitive touch screen: 1.4” 240*240 pixel IPS
Bluetooth version: 5.0
Battery: Lithium-ion 3.7V/160mAh

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com