Kogan KAWTCSSBLU User manual

Kogan Men's Azure Watch
KAWTCSSBLU
Quick Start Guide
INT RFAC
TIM S TTING
*Before setting the time, check that the watch time measurement is stopped.
1. Pull out the crown when the second hand is at the 12 o'clock position. The second hand will
stop on the spot.
2. Set the hands to the desired time of day y turning the crown.
*make sure that AM/PM is set correctly.
*Do not press any utton, otherwise the watch hands will move again.
3. Push the crown ack in to the normal position in accordance with the new minute starting.
ADJUSTING TH STOPWATCH HAND POSITIONS
Before setting the time, check that the stopwatch second and minute hands are in the “0” (12
o'clock) position.
*If the stopwatch is in use, press the uttons in the following order to reset it, then you can check to
see that the hands have returned to the “0” position.
(For further details, see “HOW TO USE THE STOPWATCH”)
*If the stopwatch is counting: (A) (B)➨
*If the stopwatch is stopped: (B)
*If the split time is displayed: (B) (A) (B)➨ ➨
*If either of the stopwatch hands are not in the “0” position, reset them y following the procedure
elow.
1. Pull out the crown.
2. Press utton (A) or (B) to reset the stopwatch second and minute hands to the “0” position.
*By pressing (A), the hands move clockwise.
*By pressing (B), the hands move counter clockwise.
3. Push the crown ack into the normal position.

HOW TO US TH STOPWATCH
•The measurement time is indicated y the stopwatch hands that move independently of the
center and 24-hour hand.
•The stopwatch indicates the measurement time in second increments y ignoring the 1/10
seconds o tained.
Standard measurement
Example: 100m race (Press the uttons in the following order)
(A) (A) (B)
START ➨STOP (Finish) ➨RESET (Reset to “0'00”)
Accumulated elapsed time measurement
Example: Basket all Game (Press the uttons in the following order)
(A) (A) (A) (A) (B)
START ➨
(Start of game)
STOP
(Time Out)
RESTART ~ ~ ➨
(Restart of game)
STOP
(Game Over)
RESET
•Restart and stopping of the stopwatch can e repeated as many times as necessary y
pressing the (A) utton.
Split time measurement
Example: 5,000m race (Press the uttons in the following order)
(A) (B) (B) (A) (B)
START ➨SPLIT / SPLIT RELEASE ~ ~ ➨STOP ➨RESET
•Measurement and release of the split time can e repeated as many times as necessary y
pressing the (B) utton.
BATTERY: SR920SW