Kohler K-8703X Assembly instructions

Installation and Care Guide
Pedestal Lavatory


1019859-X2-B ©2017 Kohler Co.
K-8703X/K-8705X

1019859-X2-B 2 Kohler Co.

Thank you for choosing Kohler Company
Thank you for choosing Kohler. Kohler craftsmanship oers you a rare
combination of proven performance and graceful sophistication that will
satisfy you for years to come. The dependability and beauty of your Kohler
product will surpass your highest expectations. We’re very proud of our
products here at Kohler and we know you will be too.
Please take a few minutes to review this manual before you start installation.
If you encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on back cover.
All information in this manual is based upon the latest product information
available at the time of publication. At Kohler, we constantly strive to improve
the quality of our products. We reserve the right to make changes in product
characteristics, packaging or availability at any time without notice.
Thank you for choosing Kohler Company.
  
 
 

 

  

 


 

Kohler Co. 3 1019859-X2-B
Before You Begin
CAUTION: Risk of personal injury or product damage. Handle with
care. Product can break, chip, or cause injury if handled carelessly. Get
help lifting the lavatory.

Important Information
IMPORTANT NOTICE TO INSTALLERS!: Please leave these instructions for
the consumer. They contain important information.
In addition to installation procedures, this manual contains important care and
cleaning. Please retain for future reference.
NOTE: Some installation parts might not be provided.
NOTE: The product pictured in the installation steps may dier from the model
being installed.
 
  

 
 

CAUTION: Risk of personal injury. This pedestal lavatory is heavy.
Do not aempt to lift or install the pedestal lavatory without assistance.
¨Observe all local plumbing and building codes.
¨Prior to installation, unpack the new lavatory and inspect it for damage.
Return the lavatory to its protective carton until you are ready to install it.
¨ This installation guide provides installation steps for aaching the lavatory
to concrete frame construction. For other installations, supply suitable
bracing and fastening devices of sucient size and strength.
¨ The walls and the oor must be square, plumb, and level.
¨Fixture dimensions are nominal and conform to tolerances established by
Standards TIS.

1019859-X2-B 4 Kohler Co.




 

¨ 
¨ 

¨  

 
¨ 
¨ 
Tools/

Kohler Co. 5 1019859-X2-B

¨ 
¨ 
Roughing-In/
Dimensions are approximate. Unit: mm.
 
1. Prepare the Site

NOTE: The supply stop handles must not extend more than 4-1/2” (114 mm.)
from the nished wall in the open position
¨Install the 1/2” water supply lines and 1-1/4” drain piping according
to the roughing-in information.
¨Check the wall structure is applicable to install the product
71
298
203
247
470
ø44
538
458
388
127 203
240
310
102
854
ø35
ø35
102102
K-8703X-8/K-8705X
K-8703X-1/K-8705X
71
151
ø10 Mounting Hole
ln Pedestal
รูยึดขารองอ่าง
ø10 Anchor Holes/รูพุก
1/2" Hot/นํ�าร้อน
1-1/2" OD
เส้นผ่าศูนย์กลาง 1-1/2"
1/2" Cold/นํ�าเย็น
Finished Wall/ผนัง
พื �น/Finished Floor

1019859-X2-B 6 Kohler Co.
2. Install the Lavatory
¨Apply six self-adhesive pads along the top surface of the pedestal.
¨ Mark the pedestal centerline on the oor.
¨ Position the pedestal on the oor centerline. Refer to the roughing-in
information for correct placement.
¨Carefully lift the lavatory into place on the pedestal. Level the lavatory and
add additional self-sdhesive pads as needed to level. If the booom of the
lavatory contacts the pedestal, reposition the self-adhesive pads as needed.
Make sure the lavatory ts at against the nished wall.
¨Refer to the roughing-in information to ensure the correct distrance between
the pedestal and the wall.
¨ Make the two lavatory anchoring holes on the nished wall.
¨ Mark the pedestal anchoring holes on the oor through the hole in the pedestal
boom.
¨Carefully remove the lavatory from the pedestal.
¨Carefully move the pedestal and lavatory away from the installation area.
¨ Drill 3/16” holes at the marked location on the nished wall and oor.
CAUTION: Risk of personal injury or product. This pedestal lavatory
is heavy. Get help lifting and moving it.
Washer
แหวนรอง
Cap Nuts
ฝาครอบนอต
Hanger Bolt
โบลท์แขวน
Pedestal
ขารองอ่าง
Screw
สกรู
Wash
แหวนรอง
Position Six Self-Adhesive
Pads to the Top of the Pedestal.
ตําแน่งแทบกาว 6 จุด
ด้านบนขาตั�ง
NOTE: You can also other fastening device of sucient size and strength.

Kohler Co. 7 1019859-X2-B
¨ 
¨ 
¨ 

¨ 

¨
¨ 



CAUTION: Risk of product damage. Do not overtighten the screw.
Overtightening may damage the product.
¨Install the hanger bolts to the backing material. Thread the cap nuts onto
the two hanger bolts. Use a 9/16” wrench to thread the hanger bolts into
the wall so 1” (25 mm.) of each bolt remains exposed between the cap nuts
and nished wall.
¨Remove the cap nuts.
¨Install the faucet and drain to the lavatory according to the manufacturer’s
instructions.
¨Move the pedestal and lavatory back into position and t the lavatory over
the hanger bolts.
¨Mask sure the lavatory rests directly on the pedestal and ts at against the
wall.
¨Remove the lavatory and set it side.
¨Thread a washer and leg bolt through the pedestal hole and into the
oor until the washer contacts the pedestal. Tighten the lag bolt until snug.
¨Move the lavatory back into position over the hanger bolts.
¨Double check the installation to be sure it is level and properly positioned.
¨Install washers and cap nuts to the hanger bolts and tighten until the
washers contact the lavatory. Tighten the cap nuts until snug.
¨Connect and tighten the trap to the drain.
¨Complete the water supply connections to the faucet according to the
instructions packed with the faucet.
¨Clean up with a nonabrasive cleaner.

1019859-X2-B 8 Kohler Co.
¨ 
¨ 
¨ 
¨ 
 
¨ 

¨ 
¨ 
¨ 
¨ 
¨ 
¨ 
 
¨ 
¨ 
¨ 

¨ 
¨ 
¨ 



Kohler Co. 9 1019859-X2-B
Care and Cleaning
For best results, keep the following in mind when caring for your product:
• Carefully read the cleaner product label to ensure the cleaner is safe for use
on the material.
• Always test your cleaning solution on an inconspicuous area before applying
to the entire surface.
• Wipe surfaces clean and rinse completely with water immediately after
cleaner application. Rinse and dry any overspray that lands on nearby
surfaces.
• Do not allow cleaners to sit or soak on the surface.
• Use a soft, dampened sponge or cloth. Never use an abrasive material such as
a brush or scouring pad to clean surfaces.
• Be careful not to leave staining materials in contact with the surface for
extended periods of time.
• The ideal cleaning technique is to rinse thoroughly and blot dry any water
from the surface after each use.

 

•   

• 

• 

• 
• 

• 
• 


1019859-X2-B 10 Kohler Co.