Kohler TEA-FOR-TWO K-856-H2 User manual

Features
•
Cast iron with Safeguard
®
finish
•
1.5 hp variable speed pump with 1.5 kW heater,
back-lit user keypad, and remote control
•
8 Flexjets TM
•
Less all trim
•
66 ″ (167.6 cm) x 36 ″ (91.4 cm) x 24 ″ (61 cm)
Codes/Standards Applicable
Specified model meets or exceeds the following:
•
IAPMO/UPC
•
Underwriter’s Laboratories (UL)
•
ASME A112.19.1M
•
ASME A112.19.7M
5.5’ BATH WHIRLPOOL
K-856-H2
ALSO K-856-LH, K-856-RH
Colors/Finishes
•0: White
•Other: Refer to Price Book for additional colors/finishes
Accessories:
•CP: Polished Chrome
•PB: Polished Brass
•Other: Refer to Price Book for additional colors/finishes
•NA: None applicable
Specified Model
Model Description Colors/Finishes
K-856-H2 Bath whirlpool, drop-in rim style ❑0❑Other_____
K-856-LH Bath whirlpool with integral flange, left drain ❑0❑Other_____
K-856-RH Bath whirlpool with integral flange, right drain ❑0❑Other_____
Required Accessories
K-9698 Jet trim kit ❑CP ❑PB ❑Other_____
K-7147-AF Drain ❑CP ❑PB ❑Other_____
Recommended Accessory
K-587 Undermount installation kit (template and installation instructions) ❑NA
Product Specification
The bath whirlpool shall be 66″(167.6 cm) in length, 36″(91.4 cm) in width, and 24″(61 cm) in height. Bath whirlpool shall be
made of cast iron with Safeguard finish. Bath whirlpool shall have 8 Flexjets, 1.5 hp variable speed pump, 1.5 kW heater, and
back-lit user control. Bath whirlpool shall be less all trim. Bath whirlpool shall be Kohler Model K-856-_______-_______.
TEA-FOR-TWOTM
Page1of2
1019482-4-EUSA: 1-800-4-KOHLER
Canada: 1-800-964-5590
kohler.com

Technical Information
Fixture*: Basin area Top area Weight
Bathing
well 45″(114.3 cm) x25″(63.5 cm) 58″(147.3 cm) x29″(73.7 cm) 510 lbs (231.3 kg)
Water depth Capacity
19-1/2″(27.3 cm) 105 gal (397.5 L)
* Approximate measurements for comparison only.
Pump Heater V A*
1.5 hp 1.5 kW 240 11
* Approximate measurements for comparison only.
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI) or Earth-Leakage
Circut-Breaker (ELCB):
Pump/control 208-240 V, 20 A, 50/60 Hz
Installation Notes
Install this product according to the installation guide.
Floor support under the whirlpool must provide for a minimum
of 2000 lbs (907.2 kg) loading.
Cast iron whirlpools are extremely heavy, making some
drop-in installations difficult. Splitting the deck/surround is
recommended if installing into a deck.
A pump/control access panel is required.
For a drop-in installation, the cut-out dimension is 64-1/2″
(163.8 cm) x 34-1/2″(87.6 cm).
For an undermount installation, the K-587 template is
required.
The hot water supply should be 70% of capacity or greater.
Installations will vary.
K-856-H2
18"
(45.7 cm)
15-7/8" (40.3 cm)66" (167.6 cm) 36" (91.4 cm)
3/4"
(1.9 cm)
24"
(61 cm)
1-1/2" OD
Pump/Control Access
34" (86.4 cm) x 15" (38.1 cm)
4-3/16"
(10.6 cm)
2-7/8" (7.3 cm)
3" (7.6 cm) 1/2" (1.3 cm)
No change in measurements if connected with drain
illustrated. (K-7147-AF or K-7147M-AF)
Product Diagram
TEA-FOR-TWOTM
TEA-FOR-TWOTM 5.5’ BATH WHIRLPOOL
Page2of2
1019482-4-E