Kohler Mira 1836.457 User manual

11329775-W9-A
Fast Fix Kit
1836.457
Genuine Mira Spare Parts
Must be tted by a competent tradesperson.
These instructions must be left with the user

21329775-W9-A
Installation of the Bar Valve Fast Fix Kit
1. Installation of this product must be carried out in accordance with these
instructions by qualied, competent personnel.
2. The plumbing installation must comply with all national or local water regulations
and all relevant building regulations, or any particular regulation or practice
specied by the local water supply company.
4
3
21
1
8 mm
25 mm
25 mm
Wall Bracket
HOT
COLD
Make sure that the pipework has been
installed correctly and that it protrudes
25 mm from the nished wall surface.
Hold the wall bracket in position and
mark the position of the xing holes.
Drill the xing holes using an 8 mm diameter
drill.
Fit the plastic pipe guide over the inlet
pipes. Level the pipe guide and secure
to the wall to hold in position. Leave the
guide in place and nish the wall.
Plastic Pipe
Guide
150 mm
HOT
COLD

31329775-W9-A
5 6
8
7
Ø6 mm
Assemble the bar valve with a sealing
washer / lter in each inlet and attach to
the wall bracket.
Note! Connections are: Hot-Left, Cold-
Right.
Install the wall plugs. Install the xing screws (supplied) and
tighten.
Note! If alternative screws are used
ensure they are non corrosive
Install the olives and the connectors.
Tighten nger tight and then another 1/4
to 1/2 turn.
Turn on the water supply and ush the
pipework.
Install the concealing plates.
9Note! Bar valve may differ from
the one shown, but the installation
procedure is the same.
10

41329775-W9-A © Kohler Co. March 2018
0844 571 5000
Calls cost 7p per minute plus your phone company’s access charge.
Visit website: www.mirashowers.co.uk/contactus
Tighten the connections, turn on the water supply and check for leaks.
11