Kohler K-19037T User manual

REVE
INSTALLATION INSTRUCTIONS
WALL-HUNG TOILET
K-19037T
BEFORE YOU BEGIN
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-please leave instructions for the
consumer.
ORDERING INFORMATION
REVE Wall-hung Toilet ............................................K-19037T
Includes REVE Wall-hung Toilet Bowl..................K-5051T
Includes REVE Quiet-close Toilet Seat..............K-17183T
NOTES
·
·
·
·
·
·
·
·
·
Observe all local plumbing and building codes.
Shut off the water supply.
Seat post holes are on 200mm centers.
Passageways is longer than 60mm.
Ensure have the correct roughing-in dimensions.
.
Be very careful while working with vitreous china products.
Vitreous china can break or chip if the bolts or nuts are
overtightened, or if carelessly handled.
Carefully inspect the new bowl for any sign of damage.
Fixture dimensions are nominal and conform to tolerances
established by ASME Standards (A112.19.2-2013).
The product complies with GB 6952-2015.
See
Fig.#1
·
·
·-
·
.....................................................K-19037T
.....................................K-5051T
.......................................K-17183T
·
·
·
·
·
·
·
·
·
200mm
60mm
1
ASME(A112.19.2-2013)
GB 6952-2015
-1-
No.2 KOHLER ROAD, SANSHUI CENTRAL INDUSTRIAL PARK, LEPING TOWN, SANSHUI DIST., FOSHAN, GUANGDONG, PRC POST CODE 528137
2 528137
8# MENGSHAN RD, ECONOMIC DEVELOPMENT ZONE OF HUANTAI, ZIBO, SHANDONG, CHINA POST CODE: 256410
8 256410
©
©
Copyright Kohler China Investment Co., Ltd. 2016
2016
1268139-T01-A

-2-
ROUGHING-IN
Unit: mm
:
Reference Value
Fig.#1
1
Kohler reserves the right to change marked dimensions without prior notice.
102
55
TOOLS AND MATERIALS REQUIRED
(Not supplied)
·254mm adjustable wrench
Metal file (file cut)
Tape measure
Tubing cutter
Level
Hacksaw
Putty knife
Screwdriver
Straight pipe coupling
Connection packing
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
·
254mm
350
315
215
230
295
340
355400
558
365 200
460
1268139-T01-A

-3-
2. SET THE SPACING OF THE BOWL
After you install the tank, be careful to set the spacing of set
aside the length for carrier studs and tighten nut. The bowl on
wall according to the dimensions as shown. See Fig. #3.
2.
3
Fig.#3
3
350
315
Unit: mm
:
230
215
35
Nut
10
Carrier Stud
NOTE: Please reserve 10mm space for
the nut strictly according to the
picture. Otherwise, it will greatly
affect the loading capacity of the
toilet.
10mm
1. INSTALL THE TANK
1) Turn the water supply off before installing the new toilet.
2) Install the concealed tank system in wall before decorating
the wall.
3) Install the tank system per tank's installation instructions.
Recommended tanks for 3/4.5L
1 HYDRO-TOWER 100 3/4.5L touchless in-wall tank K-
6281T-W-NA (with frame).
2 HYDRO-TOWER 300 3/4.5L in-wall tank K-4179T-NA
(with frame).Can match with faceplates K-4177 CP or K-
8857T-CP
)
)
T-
.
INSTALLATION
Fig.#2
2
1.
1)
2)
3)
3/4.5L
1) 3/4.5 100 K-6281T-W-
NA( )
2) 3/4.5 300 K-4179T-NA( )
K-4177T-CP K-8857T-CP.
1268139-T01-A

3. ATTACH CONNECTION PIPE
1) Attach inlet pipe which set aside the length to the
concealed tank.
2) Attach outlet pipe to the toilet.
3) You may apply some lubricant to help connect smoothly.
4) Please tilt the outlet pipe a little after it is installed to
prevent water storage.
See Fig. #4.
See Fig.#5.
3.
1)
2)
3) 4
4) 5
Fig.#4
4
Fig.#5
5
Inlet
Outlet
1
-4-
4. INSTALL THE NEW TOILET
1) Install the accessory kit into the installing hole.
2) Place the new toilet on the wall through the carrier.
3) Use wrench to tighten accessories and level the toilet.
Then finish fixation.
4) Insert the cap into installing hole. See Fig. #6.
4.
1)
2)
3)
4) 6
Fig.#6
6
5. Apply sealant to make sure the bowl,s edge seals to the
wall. See Fig. #7.
5. 7
Fig.#7
7
6. Install the toilet seat according to its installation instructions. 6.
1268139-T01-A

-5-
CONSUMER RESPONSIBILITIES
When cleaning up after installation, do not use abrasive
cleansers, as they may scratch and dull the toilet surface.
Use warm water and a liquid detergent to clean the surface.
Remove stubborn stains, paint, or tar with turpentine or paint
thinner. Do not allow cleaners containing petroleum distillates
to to remain in contact with any toilet surface for long periods
of time.
Remove plaster by carefully scraping with a wood edge. Do
not use metal scrapers, wire brushes, or other metal tools.
Use a powder type detergent on a damp cloth to provide mild
abrasive action to any residual plaster.
Clean the outside surface of your vitreous china product with
mild soap and warm water. Wipe the entire surface
completely dry with a clean, soft cloth.
Most toilet bowl cleaners are not harmful to the vitreous china
surface of the toilet bowl. Please follow the bowl cleaner
manufacturer is instructions carefully.
Do not use abrasive cleaners or solvents.
()
0C
o
WARNING: Risk of property or product damage.
Do not use in-tank cleaners. Products containing
chlorine (calcium hypochlorite) can seriously damage
fittings in the tank. This damage can cause leakage
and property damage.
Kohler Company shall not be responsible or liable for any
damage to these tank fittings caused by the use of cleaners
containing chlorine (calcium hypochlorite).
'
Please do not use hard materials (like
scouring pad) to clean product surface, especially the
product logo.
CAUTION:
CAUTION: Don t use any cement while installing
the toilet.
WARNING: Risk of product damage.
Heat expansion of the toilet may damage
the feet of the toilet. Kohler will not be responsible for
any damage because of using cement.
Do not throw into the toilet what is easy to block it,
such as newspaper, paper pilch, sanitary towel.
Do not bump the vitreous china with great force to
prevent it from damaging and leaking.
Do not use the product in the water below 0 C.
o
1268139-T01-A