Kohler K-3723 User guide

Features
•Vitreous china
•Two-piece toilet
•Comfort Height®Elongated bowl
•Dual Flush flushing system
•Includes top-mount dual flush trip lever
•1.6 gpf (6.0 lpf) or 1.0 gpf (3.8 lpf)
•Fully skirted trapway
•12" (305 mm) rough-in
•Supply line included
•4-1/2" (114 mm) x 5-3/4" (146 mm) water area
•28-5/8" (727 mm) x 14-3/16" (360 mm) x 32-1/2" (826 mm)
•Floor mount / Floor outlet
Recommended Accessories
K-4008 Toilet Seat
K-4774 Toilet Seat
K-4650 Toilet Seat
K-7659 Angle Stop
K-7668 Straight Stop Codes/Standards
Components
Product includes:
K-4353 Toilet Bowl
K-4441 Toilet Tank
Additional included component/s: Tank cover, Dual flush push
buttons, Installation kit, Installation template, and Tank accessory
pack.
ASME A112.19.2/CSA B45.1
ASME A112.19.14
DOE - Energy Policy Act 1992
EPA WaterSense®
KOHLER®One-Year Limited Warranty
See website for detailed warranty information.
Available Color/Finishes
Color tiles intended for reference only.
DescriptionCodeColor
White0
Biscuit96
Almond47
DuneNY
Ice™Grey95
Black Black™7
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
6-16-2015 04:17
Persuade®Curv
Dual Flush Toilet
K-3723

12" (305 mm)
Notes
Technical Information Install this product according to the installation
guide.
All product dimensions are nominal.
Two-pieceToilet type:
IMPORTANT! The rough-in must be 12" (305
mm) or more from the base of the wall or
Elongated frontBowl shape:
2" (51 mm)Trap passageway: baseboard. Install or relocate the supply and
Water Consumption outlet as necessary to conform to rough-in
dimensions.
1.6 gpf (6 lpf)Full:
1 gpf (3.8 lpf)Reduced: If this toilet is installed in new construction, install
a new supply stop following the dimensions in
the diagram.
4-1/2" x 5-3/4" (114 mm x 146 mm)Water surface size:
8-1/2" (216 mm)Rim to water surface:
12" (305 mm)Rough-in: In installations with the supply stop installed, the
existing supply stop may need to be relocated if
5-1/2" (140 mm)Seat-mounting holes:
it is less than 8-1/2" (216 mm) from the centerline
of the toilet. Dry fit the toilet to confirm if the
supply stop needs to be relocated.
The supplied hose will extend roughly 6" (152
mm) from the toilet. If the supplied hose does not
reach the supply stop, a longer supply hose may
be used.
For back-to-back toilet installations: Use only a
45°double wye fitting.
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
www.kohler.com
6-16-2015 04:17
Persuade®Curv
Dual Flush Toilet
K-3723