- 12 -
3 Press the button On/Info . The scales
now show the personal data. Should
no measurements have been carried
out as yet under this storage space,
the no saved data indication "----"
will be shown. Otherwise, the scales
will be shown the last measurement
results one after the other.
10. Maintaining the scales
10.1. Changing the batteries
Shown in the display is: „Lo“
The batteries in the scales are almost
fully discharged. Always change both
button batteries.
The insertion of the batteries is described
in chapter 6.2. „Power Supply“.
11. Troubleshooting / Error
Messages
11.1. The scales cannot be switched on
The scales cannot be switched on by
pressing the button On/Info or by
tapping on the middle of the scales:
ACheck to see if the batteries have
been correctly inserted into the com-
partment on the underside of the
scales. Take note that the batteries
must be inserted in accord with the
polarities marked in the compartment.
BCheck to see if the batteries in the
scales are discharged. Before the
batteries are completely discharged
a warning symbol is shown in the
display . This is also explained in
chapter 10. „Maintaining the scales“.
Exchange both button batteries.
11.2. Malfunctions in the display
The scales contain sensitive electronic
components. It is thus possible that they
may be disturbed by radio transmitter
appliances in the immediate vicinity.
These could be for example mobile tele-
phones, walkie-talkies, CB radios, radio
remote controls/other remote controls
and microwave appliances. Should mal-
functions appear in the display , remove
all such appliances from the vicinity of
the scales. Frequently it is also sufficient
to simply switch off the particular app-
liance as soon as the scales are to be
taken into use.
NOTE:
Avoid the loading and discharging of
static electricity. This can cause erroneous
measurement displays and/or sudden
inactivation of the scales.
11.3. Error messages shown in the
display
11.3.1. „0-Ld“
If this error message appears, the weight
on the scales exceeds 160 Kg. The scales
are not designed for weights above
160 Kg.
Warning!
Do not burden the scales with a weight
of more than 160 kg! Through this, the
scales could be irreparably damaged!
11.3.2. „Err“
If this error message is shown the scales
cannot measure the bodyfat, muscle
mass and body-water shares.
KH 5516