Konica Minolta bizhub 750 User manual

User’s Guide [Copy Operations]

Introduction
bizhub 750/600 x-1
Introduction
Thank you for choosing this machine.
This manual contains details on the operation of the various functions of the
machine, precautions on its use, and basic troubleshooting procedures. In
order to ensure that this machine is used correctly and efficiently, carefully
read this manual before using the machine. After reading the manual, store
it in the designated holder so that it can easily be referred to when questions
or problems arise during operation.
The illustrations used in this manual may appear slightly different from views
of the actual equipment.
Energy Star®
As an ENERGY STAR®Partner, we have determined that this machine meets
the ENERGY STAR®Guidelines for energy efficiency.
What is an ENERGY STAR®Product?
An ENERGY STAR®product has a special feature that allows it to automat-
ically switch to a “low-power mode” after a period of inactivity. An ENERGY
STAR®product uses energy more efficiently, saves you money on utility bills
and helps protect the environment.

Introduction
x-2 bizhub 750/600
Trademarks and Registered Trademarks
KONICA MINOLTA, KONICA MINOLTA Logo, and The essentials of imaging
are registered trademarks or trademarks of KONICA MINOLTA HOLDINGS,
INC.
PageScope and bizhub are registered trademarks or trademarks of KONICA
MINOLTA BUSINESS TECHNOLOGIES, INC.
Netscape Communications, the Netscape Communications logo, Netscape
Navigator, Netscape Communicator, and Netscape are trademarks of Net-
scape Communications Corporation.
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG “AS IS” AND ANY EX-
PRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AU-
THOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCI-
DENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILI-
TY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DAMAGE.
The licence and distribution terms for any publically available version or de-
rivative of this code cannot be changed. i.e. this code cannot simply be cop-
ied and put under another distribution licence [including the GNU Public
Licence.]
All other product names mentioned are trademarks or registered trademarks
of their respective companies

Introduction
bizhub 750/600 x-3
Contents
Introduction
Energy Star®..................................................................................... x-1
What is an ENERGY STAR®Product? ............................................x-1
Trademarks and Registered Trademarks ...................................... x-2
Contents ............................................................................................ x-3
Available Features .......................................................................... x-15
Automatically selecting the paper .................................................x-15
Adjusting copies to the size of the paper .....................................x-15
Scanning the document in separate batches ...............................x-15
Copying an original containing various page sizes .......................x-15
Specifying separate horizontal and vertical zoom ratios ..............x-16
Adjusting copies according to the image quality of the original ...x-16
Copying multiple Original pages onto a single page ....................x-16
Sorting copies ...............................................................................x-17
Stapling copies .............................................................................x-17
Punching holes in copies ..............................................................x-17
Center folding/binding ..................................................................x-18
Zigzag folding and folding in three ................................................x-18
Inserting paper between copies of overhead projector
transparencies ...............................................................................x-18
Inserting copies of a different original at a specified location .......x-19
Adding a cover page/insertion ......................................................x-19
Copying with chapter title pages on the front side .......................x-19
Copying with reversed colors .......................................................x-20
Separately copying a page spread ...............................................x-20
Repeating copy images ................................................................x-20
Splitting an original page into two copies .....................................x-21
Making copies for filing .................................................................x-21
Adjusting the image to fit the paper size ......................................x-21
Copying with a layout for center binding ......................................x-22
Erasing sections of copies ............................................................x-22
Printing distribution text on copies ...............................................x-22
Managing jobs ...............................................................................x-22
Programming copy settings ..........................................................x-23
Checking the copy settings ..........................................................x-23
Enlarging the size of text in touch panel screens .........................x-23
Displaying explanations of functions and settings ........................x-23
Interrupting a copy job ..................................................................x-23
Printing a sample copy .................................................................x-23
Explanation of Manual Conventions ............................................. x-24

Introduction
x-4 bizhub 750/600
Descriptions and Symbols for Original and Paper .......................x-25
“Width” and “Length” ...................................................................x-25
Paper Orientation ..........................................................................x-25
User’s Guides ...................................................................................x-27
User’s Guide [Copy Operations] <this manual> ...........................x-27
User’s Guide [Network Scanner Operations] ................................x-27
User’s Guide [Box Operations] .....................................................x-27
User’s Guide [Enlarge Display Operations] ...................................x-27
User’s Guide [Facsimile Operations] ............................................x-27
User’s Guide [Network Fax Operations] .......................................x-28
IC-202 User’s Guide/Quick Guide ................................................x-28
Legal Restrictions on Copying .......................................................x-29
1 Installation and Operation Precautions
1.1 Safety Information .............................................................................1-2
Warning and Precaution Symbols ..................................................1-2
Meaning of Symbols .......................................................................1-2
1.2 Regulation Notices ............................................................................1-9
CE Marking (Declaration of Conformity) for Users of the
European Union (EU) ......................................................................1-9
USER INSTRUCTIONS FCC PART 15 - RADIO FREQUENCY
DEVICES (For U.S.A. Users) ...........................................................1-9
INTERFERENCE-CAUSING EQUIPMENT STANDARD
(ICES-003 ISSUE 4) (For Canada Users) ........................................1-9
For Users in countries not subject to Class B regulations ............1-10
Laser Safety ..................................................................................1-10
Acoustic noise (For European Users Only) ...................................1-12
For EU member states only ..........................................................1-12
Notification for US only .................................................................1-12
1.3 Caution Notations and Labels ........................................................1-13
1.4 Space Requirements .......................................................................1-15
1.5 Operation Precautions ....................................................................1-17
Power Source ...............................................................................1-17
Operating Environment .................................................................1-17
Storage of Copies .........................................................................1-17
2 Before Making Copies
2.1 Part Names and Their Functions .....................................................2-2
Outside of Machine .........................................................................2-2
Inside of Machine ............................................................................2-5
Options ...........................................................................................2-6
Large Capacity Unit LU-401/LU-402 ..............................................2-8

Introduction
bizhub 750/600 x-5
Finisher FS-504/FS-505/FS-602 (+ Punch Kit PK-505) ................. 2-9
Post Inserter PI-501 ..................................................................... 2-12
Z Folding Unit ZU-602 ................................................................. 2-13
Shift Tray SF-601 ......................................................................... 2-14
Control Panel ............................................................................... 2-15
Basic Settings Screen (Basic Screen) .......................................... 2-18
Icons That Appear in the Touch Panel ......................................... 2-20
2.2 Adjusting the Angle of the Control Panel ..................................... 2-22
To adjust the angle of the control panel ...................................... 2-22
2.3 Turning on the Main Power and the Sub Power .......................... 2-24
To turn on the machine ................................................................ 2-24
To scan during warm-up .............................................................. 2-26
To turn off the machine ................................................................ 2-28
Automatically Canceling the Settings (Automatic Panel Reset) ... 2-29
Automatically Canceling the Mode Screen
(Automatic System Reset) ............................................................ 2-29
Automatically Conserving Energy (Low Power Mode) ................. 2-30
Automatically Conserving Energy (Sleep Mode) .......................... 2-31
Manually Conserving Energy ....................................................... 2-32
Limiting Machine Usage According to a Schedule
(Weekly Timer) .............................................................................. 2-33
Controlling the Use of This Machine With User Authentication ... 2-35
Using the Machine With Account Track ....................................... 2-38
2.4 Loading Paper Into the Tray 1 or 2 ................................................ 2-41
To load paper (tray 1 or 2) ............................................................ 2-41
2.5 Loading Paper Into the Tray 3 or 4 ............................................... 2-43
To load paper (tray 3 or 4) ............................................................ 2-43
2.6 Loading Paper Into the Bypass Tray ............................................. 2-46
To load paper (bypass tray) ......................................................... 2-46
2.7 Loading Paper Into the LCU (LU-401/LU-402) ............................. 2-50
To load paper (LCU) ..................................................................... 2-50
2.8 Loading Paper of a Different Size Into Paper Trays .................... 2-53
Changing the Size of Paper That Is Loaded ................................ 2-53
When Thick Paper Is Loaded Into a Paper Tray .......................... 2-55
To set the conveyance lever ........................................................ 2-55
3 Basic Copy Operations
3.1 General Copy Operation .................................................................. 3-2
To make a copy ............................................................................. 3-2
3.2 Operations That Cannot Be Combined .......................................... 3-5
Operations where the setting specified last is given priority ......... 3-5

Introduction
x-6 bizhub 750/600
Operations where the setting specified first is given priority ..........3-6
3.3 Positioning the Original .....................................................................3-7
To position the original into the ADF ..............................................3-7
To position the original on the original glass ..................................3-9
Scanning the Original in Separate Batches
(“Separate Scan” Setting) .............................................................3-11
Scanning a Multi-Page Original from the Original Glass ..............3-14
3.4 Specifying Original Settings ...........................................................3-17
Copying Original of Mixed Sizes (“Mixed Original” Setting) .........3-17
Positioning Folded (Z-Folded) Original .........................................3-19
Positioning Tabbed Original ..........................................................3-20
Selecting the Original Orientation (Original Direction Settings) ....3-22
To specify an Original Direction setting ........................................3-23
Selecting the Position of the Binding Margin (Margin Settings) ...3-24
To specify a Margin setting ...........................................................3-26
To change scan settings for each document ...............................3-28
3.5 Selecting a Paper Setting ...............................................................3-31
Automatically Selecting the Paper Size
(“Auto Paper Select” Setting) ........................................................3-31
Manually Selecting the Desired Paper Size ..................................3-33
3.6 Specifying a Zoom Setting .............................................................3-34
Automatically Selecting the Zoom Ratio
(“Auto Zoom” Setting) ...................................................................3-34
Specifying the Same Zoom Ratio as the Original
(“×1.0” Setting) ..............................................................................3-35
Slightly Reducing the Copy (“Minimal” Setting) ............................3-36
Selecting a Preset Zoom Ratio (Enlarge and Reduce Settings) ...3-37
Typing In the Zoom Ratio (XY Zoom Setting) ...............................3-38
Typing In Separate X and Y Zoom Ratios
(Independent Zoom Settings) .......................................................3-40
Selecting a Stored Zoom Ratio .....................................................3-42
Storing the Desired Zoom Ratio ...................................................3-43
3.7 Selecting a Simplex/Duplex Setting (1-Side/2-Sides Settings) ...3-45
To select single-sided copies .......................................................3-47
To select double-sided copies .....................................................3-49
3.8 Selecting the Quality of the Original ..............................................3-52
Positioning Original With Small Print or Photos
(Orig. Image Type Settings) ..........................................................3-52
To specify an Orig. Image Type setting ........................................3-53
3.9 Specifying the Density Settings .....................................................3-54
Adjusting the Print Density (Density Settings) ..............................3-55
Adjusting the Background Density
(Adjust Background Settings) .......................................................3-56

Introduction
bizhub 750/600 x-7
3.10 Selecting a Combine Originals Setting ......................................... 3-57
Copying Multiple Original Pages Onto a Single Page
(Combine Originals) ...................................................................... 3-59
3.11 Selecting Finishing Settings .......................................................... 3-60
Separating Copies by Sets (“Sort” Setting) ................................. 3-64
Separating Copies by Pages (“Group” Setting) ........................... 3-65
Feeding Out Copies Face Up (“Face Up” Setting) ....................... 3-66
Stapling Copies (Staple Settings) ................................................ 3-67
To bind copies with staples ......................................................... 3-70
Punching Holes in Copies (Punch Settings) ................................ 3-72
To punch holes in copies ............................................................. 3-73
3.12 Specifying Folding Settings ........................................................... 3-75
To fold copies at the center (“Half Fold”) ..................................... 3-76
To bind copies at the center (“Fold & Staple”) ............................. 3-77
To fold copies fanned (“Z-Fold”) .................................................. 3-78
To fold copies in three (“Tri-Fold”) ............................................... 3-79
3.13 Using Finisher Manually ................................................................. 3-81
To use finisher manually .............................................................. 3-82
3.14 Scanning the Next Original To Be Copied While a Copy Job Is
Being Printed (Next Job Reservation) ........................................... 3-84
To reserve a copy job .................................................................. 3-84
3.15 Stopping Scanning/Printing ........................................................... 3-86
To stop scanning/printing ............................................................ 3-86
3.16 Deleting a Stopped Job .................................................................. 3-87
To delete a stopped job ............................................................... 3-87
4 Additional Copy Operations
4.1 Checking the Copy Settings (Mode Check) ................................... 4-2
To check the settings ..................................................................... 4-2
To change the settings ................................................................... 4-4
4.2 Printing a Proof Copy To Be Checked (Proof Copy) ..................... 4-5
To make test prints ........................................................................ 4-5
4.3 Interrupting a Copy Job (Interrupt Mode) ...................................... 4-8
To interrupt a copy job ................................................................... 4-8
4.4 Registering Copy Programs (Mode Memory) .............................. 4-10
To store/change a copy program ................................................ 4-10
To delete a copy program ............................................................ 4-13
4.5 Copying With Programmed Copy Settings (Mode Memory) ...... 4-14
To recall a stored job ................................................................... 4-14

Introduction
x-8 bizhub 750/600
4.6 Displaying Function Descriptions (Help) .......................................4-17
Overview of Help Screens ............................................................4-17
To display the Main Help Menu screen ........................................4-20
To display the Help screen while specifying a setting ..................4-22
4.7 Specifying Control Panel Settings (Accessibility Mode) ..............4-23
Displaying the Accessibility Setting Screen ..................................4-23
To set the “Key Repeat Start/Interval Time” function ...................4-23
To set the “Enlarge Display Timer Setting” function .....................4-26
To set the “Message Display Time” function ................................4-28
To set the “Accept Sound Setting” function .................................4-30
To set the “Warning Sound” function ...........................................4-32
To set the “Sound Volume Setting” function ................................4-35
To set the “Touch Panel Adj.” function .........................................4-37
To set the “Auto Reset Notification” function ...............................4-39
To set the “Enlarge Display Confirmation Screen” function .........4-42
5 Troubleshooting
5.1 When the Message “Malfunction detected.” Appears
(Call Technical Representative) .......................................................5-2
Display in Enlarge Display Mode ....................................................5-2
To call the technical representative ................................................5-3
5.2 When the Message “Misfeed detected.” Appears .........................5-5
To clear a paper misfeed ................................................................5-6
5.3 When the Message “Replenish paper.” Appears ...........................5-8
To replenish paper ..........................................................................5-8
5.4 When the Message “... Not enough remaining memory.”
Appears ............................................................................................5-10
Memory Becomes Full While Scanning ........................................5-10
Display in Enlarge Display Mode ..................................................5-10
Memory Becomes Full While Queuing a Job ................................5-11
Display in Enlarge Display Mode ..................................................5-11
5.5 Simple Troubleshooting ..................................................................5-12
Main body .....................................................................................5-12
ADF ...............................................................................................5-14
Finisher .........................................................................................5-15
5.6 Main Messages and Their Remedies .............................................5-16
6 Specifications
6.1 Specifications ....................................................................................6-2
bizhub 750/600 ...............................................................................6-2
ADF .................................................................................................6-3
Option Specifications ......................................................................6-5

Introduction
bizhub 750/600 x-9
Large Capacity Unit LU-401 .......................................................... 6-5
Large Capacity Unit LU-402 .......................................................... 6-5
Finisher FS-504 .............................................................................. 6-6
Finisher FS-505 .............................................................................. 6-7
Finisher FS-602 .............................................................................. 6-8
Punch Kit PK-505 ........................................................................... 6-9
Z Folding Unit ZU-602 ................................................................... 6-9
Post Inserter PI-501 ....................................................................... 6-9
Shift Tray SF-601 ......................................................................... 6-10
Security Kit SC-501 ..................................................................... 6-10
Accessories .................................................................................. 6-10
7 Copy Paper/Original
7.1 Copy Paper ........................................................................................ 7-2
Possible Paper Sizes ..................................................................... 7-2
Paper Types and Paper Capacities ............................................... 7-4
Special Paper ................................................................................. 7-5
Precautions for Paper .................................................................... 7-7
Paper Storage ................................................................................ 7-7
Automatic Tray Switching Feature ................................................. 7-8
Order for Selecting the Paper Trays .............................................. 7-8
7.2 Specifying the Paper Setting for the Bypass Tray ......................... 7-9
To automatically detect the paper size
(“Auto Paper Select” setting) ......................................................... 7-9
To specify a paper size (Standard Size settings) ......................... 7-11
To specify a non-standard paper size
(Custom Size settings) ................................................................. 7-13
To store a non-standard paper size
(Custom Size settings Store) ........................................................ 7-15
To select a setting for oversized paper
(Oversized Paper settings) ........................................................... 7-18
To specify a setting for special paper .......................................... 7-21
7.3 Specifying Paper Settings for Paper Trays .................................. 7-23
To display the Paper Tray Setting screen .................................... 7-23
To specify a standard paper size (Standard Size 1 settings) ....... 7-25
To specify a setting for standard special-sized paper
(Standard Size 2 settings) ............................................................ 7-26
To specify a non-standard paper size (Custom Size settings) .... 7-28
To select a setting for oversized paper
(Oversized Paper settings) ........................................................... 7-30
To specify a paper type ............................................................... 7-32
7.4 Originals .......................................................................................... 7-34
Original That Can Be Positioned into the ADF ............................. 7-34
Precautions for Positioning Original into the ADF ........................ 7-36