Konica Minolta bizhub C360 Series User manual

1
bizhub C360 bizhub C280 bizhub C220
BASIC COPYING
Press “Copy” on Panel
Place Originals in the Document Feeder Face Up.
Select copy quantity then press “Start”.
Note: Delicate originals photos or books place on Platen Glass.
COPY QUANTITY
PROOF COPY ( check first completed set.)
Place Originals in Document Feeder
Select the desired settings for the copy job.
Enter copy quantity
Press “Proof Copy”.
Note: To continue or cancel press “Yes” or “No” on Touch Screen.

2
bizhub C360 bizhub C280 bizhub C220
DOUBLE SIDING
Place Originals in Document Feeder
Press “Simplex/ Combine”.
Choose desired setting eg. “1 > 2” Single Originals to Double Copies.
Enter copy quantity.
Press “Ok”.

3
bizhub C360 bizhub C280 bizhub C220
REDUCING & ENLARGING
Place Originals in Document Feeder.
Press “Zoom” on touch screen.
Select a preset ratio on touch screen eg. “1.414 A4 > A3”
Note: when enlarging A4 > A3 Place A4 original in document feeder in landscape
position.
MANUAL REDUCING & ENLARGING
Select “XY Zoom” on touch screen.
Choose a ratio between .250% & 4.000% using numeric key pad
Press “OK”

4
bizhub C360 bizhub C280 bizhub C220
PRINTING ON CARD OR OHP
Press “Paper” on touch screen
Select the “bypass tray”

5
bizhub C360 bizhub C280 bizhub C220
Continued….
Press “Change tray settings”
Note: This screen will automatically appear if you place paper in the bypass tray
before making any of the previous selections.
Select the appropriate setting eg. “Thick 1”
Press “OK” on touch screen
Then press “Start”.

6
bizhub C360 bizhub C280 bizhub C220
STAPLING & HOLE PUNCHING
Press “Finishing” on touch screen
Select desired setting
Press “Ok”

7
bizhub C360 bizhub C280 bizhub C220
BOOKLETS
Press “FINISHING” on touch screen
Select “Fold & Bind
Press “Ok”
Then press “Start”.
Note: When creating A3 folded to A4 booklets select A3 paper in paper trays
before pressing start.

8
bizhub C360 bizhub C280 bizhub C220
SCANNING
Press “FAX/SCAN” button (next to COPY button)
Location maybe on main
screen or under alpha
Place Originals in the Document Feeder Face Up.
Choose location in default area or go to “Program” “Group” or “Address Book” to
find correct location.
Note: You may also set email address in Direct Input for one off emails.
Press “Start” to scan using default settings
Press “Scan Settings” to make any Changes

9
bizhub C360 bizhub C280 bizhub C220
Select desired settings
Select desired settings such as file type, simplex/duplex and colour.
Original Type - Text/photo, text, photo, dot matrix or copied paper
Simplex/Duplex- select if your original document is printed on one side or two
sides
Resolution -Choose between 200, 300, 400, 600dpi (Quality of scan)
File Type - Choose the file format of your scanned attachment - JPEG, TIFF,
PDF, Compact PDF (must select full colour, 300 dpi)
Density – Adjusts the lightness and darkness of your document
Separate Scan - Select if scanning more than 100 originals through RADF or
more than 1 original from the glass to keep as one file
press “Ok”
Then press “Start”
Note: Scanning can be setup as scan to email, FTP, SMB or box scanning.
Consult your IT department for setup.

10
bizhub C360 bizhub C280 bizhub C220
10
bizhub C360 bizhub C280 bizhub C220
FAXING
Press “Fax/Scan” on Panel
Place Originals in the Document Feeder Face Up.
Using the keypad, enter in the fax number, or select a pre- programmed number on
the screen
BEFORE SENDING FAX
Press Scan Settings to select other options such as to change Original type,
Simplex/Duplex and Resolution and File Type
Then press “Start”