Konica Minolta CM-600d User manual

The essentials of imaging
Spectrophotometer
CM-700d / 600d
New Generation Spectrophotometers with
Wireless Communication and Colour LCD Screen

Objective Quality Control of colour by instrumental assessment has proven to be reliable and affordable technology for
any products where colour is an important quality criterion, as in the Paints & Coatings-, Plastics-, Automotive-, Home-
Appliance-, Ceramics-, Textiles- and many other Industries. In addition, the increasingly global relationship between raw
material suppliers, component manufactures, assemblers and buyers make precise colour data communication essential in a
world which is ever more colourful.
The new generation of portable spectrophotometers from Konica Minolta offers unprecedented ease of use and
perfect handling by utilising new technologies, enhanced ergonomics and applying Konica Minolta’s known advanced
optical design and signal processing technology. The CM-700d and CM-600d models will change the way portable
spectrophotometers are perceived and applied in Research & Development and QualityControl by improving usability
and convenience.
Compact and lightweight spectrophotometer
offering new technologies
for perfect handling!
CM-700d / 600d
impressive colour measurement!
Experience
¾
Communicate wireless.
The CM-700d and CM-600d are the world’s first
portable colour measuring instruments enabling wireless
data communications with an external PC or a Printer
using Bluetooth®class 1 technology. This brings a
new dimension of freedom of operation to portable
colour measurement in production eliminating the usual
cable tangle associated with conventional instruments.
Bluetooth®data communications with the new models
can work at distances up to 100m including bi-
directional communications displaying PASS/FAIL
message or colorimetric data. In stationary mode, the
instruments also offer communications via a USB port.
¾
Measure anything anywhere.
With the CM-700d and CM-600d you can measure any sample anywhere! The
ergonomic vertical alignment is perfectly suited to position and measure round or
even concave shaped parts and samples with single hand operation. Weighing
only 550 g, the CM-700d and CM-600d are the most lightweight instruments
in their class and thus allow excellent portability for on-site measurement. The
measuring aperture is selectable between Ø8 mm and Ø 3 mm to measure even
small sample sizes (CM-700d only).
¾
See colours in colour.
The CM-700d and CM-600d are the world’s first portable colour measuring
instruments with a colour LCD screen to improve colour data reading & perception.
The 2.36-inch bright TFT display shows colour readings both in numerical
or graphical mode to improve operability and understanding. Pseudo colour
simulations to express colour difference or metamerism are also possible for rapid
visual indication.

¾
Easy to operate.
The CM-700d and CM-600d also set new standards in ease of use and in-
tuitive operation. Five dedicated buttons for the most important operations
and displayed menu guidance in 6 languages make it easy to navigate
through all functions and features. Data memory capacity allows users to
store up to 1.000 targets and 4.000 measurement sets. With the “Auto
target” function, the instrument searches for the closest target of any mea-
sured colour.
¾
Easy to read colour LCD screen.
Abundant information is displayed in colour for easy understanding. Mea-
sured colours can also be reproduced as colour patches on the colour
LCD, which is useful to check the level of colour difference or to search for
colours.
Spectral graph Pseudocolour Colour difference graph
¾
More than you expect.
In addition to all the advanced technology, both models come with a full
list of features and functions you can expect from the leader and pioneer
in portable colour measurement:
1.
2.
3.
4.
5.
Sphere geometry with simultaneous measurement (automatic
Sphere geometry with simultaneous measurement (automatic
switching) of specular components included (di:8°) and excluded
switching) of specular components included (di:8°) and excluded
(de:8°)
(de:8°)
Powerful and long life Xenon Flash illumination for maximum accu-
Powerful and long life Xenon Flash illumination for maximum accu-
racy even on dark and saturated colours
racy even on dark and saturated colours
Highest levels in Inter-Instrument- and Inter-Model-Agreement,
Highest levels in Inter-Instrument- and Inter-Model-Agreement,
essential for global colour data exchange
essential for global colour data exchange
Choice of 3 power supply modes: Dry battery, rechargeable
Choice of 3 power supply modes: Dry battery, rechargeable
batteries (4 AA size) or AC Adapter for maximum flexibility
batteries (4 AA size) or AC Adapter for maximum flexibility
Automatic “Stand-by” power saving function mode
Automatic “Stand-by” power saving function mode

SAFETY PRECAUTIONS
Main specifications
Model CM-700d CM-600d
Illumination / viewing system di: 8°, de: 8° (diffused illumination, 8-degree viewing angle), SCI (specular component included)/SCE (specular component excluded)
selectable with automatic switching (Conforms to CIE No. 15, ISO 7724/1, DIN5033 Teil7, ASTM E 1164, and JIS Z 8722)
Size of integrating sphere ø 40 mm
Detector Silicon photodiode array (dual 36-element)
Spectral separation device Diffraction grating
Wavelength range 400 nm to 700 nm
Wavelength pitch 10 nm
Half bandwidth Approx. 10 nm
Reflectance range 0 to 175%, Display resolution: 0.01%
Light source Pulsed xenon lamp (with UV cut filter)
Measurement time Approx. 1 second
Minimum measurement interval Approx. 2 seconds (in SCI or SCE mode)
Battery performance
With alkaline dry batteries: Approx. 2,000 measurements With nickel-metal-hydride rechargeable batteries (2300 mAh): Approx. 2,000
measurements with full charge * Stand-alone continuous measurement fixed to either SCI or SCE mode at 10-second intervals at 23°C
Measurement / illumination area MAV: ø 8 mm/ ø 11 mm SAV: ø3 mm/ ø6 mm
*
Changeable by replacing target mask and selecting lens position
MAV: ø8 mm/ ø11 mm only
Repeatability Spectral reflectance: Standard deviation within 0.1%, Chromaticity value: Standard deviation within E*ab 0.04
* When a white calibration plate is measured 30 times at 10-second intervals after white calibration
Inter-instrument agreement Within E*ab 0.2 (MAV/SCI) * Based on 12 BCRA Series II colour tiles compared to values measured with a master body at 23°C
No. of averaging measurements 1 to 10 (Auto averaging), 1 to 30 (Manual averaging)
Display 2.36-inch TFT colour LCD
Interfaces USB1.1; Bluetooth®standard version 1.2*
Observer 2° observer or 10° observer
Illuminant A, C, D50, D65, F2, F6, F7, F8, F10, F11, F12 (Simultaneous evaluation with two light sources possible)
Displayed data Spectral values/graph, colorimetric values, colour difference values/graph, PASS/FAIL result, pseudocolour, colour assessment
Colour spaces L*a*b*, L*C*h, Hunter Lab, Yxy, XYZ, Munsell, and colour difference in these spaces (except for Munsell)
Colorimetric data MI, WI(ASTM E313-73/E313-96), YI(ASTM E313-73/ASTM D1925), ISO Brightness, 8° gloss value
Colour difference formulas E*ab (CIE1976), E*94 (CIE1994), E*00 (CIE 2000), CMC (l: c)
Storable data sets Measurement data: 4,000 sets/Target colour difference data: 1,000 sets
Pass/fail judgment
Tolerances can be set to colorimetric values (excluding Munsell), colour difference values, colour values (excluding 8° gloss value) respectively
Power Special AC adapter; 4 AA-size alkaline dry batteries or nickel-metal-hydride rechargeable batteries
Size 73 (W) x 211.5 (H) x 107 (D) mm
Weight Approx. 550 g (without white calibration cap and batteries)
Operating temperature/ humidity range 5 to 40°C, relative humidity 80% or less (at 35°C) with no condensation
Storage temperature/ humidity range 0 to 45°C, relative humidity 80% or less (at 35°C) with no condensation
* Applicable Bluetooth®profile: Serial Port Profile, Output: Bluetooth®Power Class 1. The communication distance may vary depending on the obstacles and radio wave conditions between the devices. Successful
wireless communication is not guaranteed with all Bluetooth®-ready equipment.
• Bluetooth®is a registered trademark of Bluetooth SIG, Inc. and is used under license agreement.
Konica Minolta Sensing, Inc. Osaka, Japan
Konica Minolta Sensing Americas, Inc. New Jersey, U.S.A. Phone: [phone] (in USA), Fax: [phone]
201-236-4300 (outside USA)
Konica Minolta Sensing Europe B.V. European Headquarter/BENELUX Nieuwegein, The Netherlands Phone: [phone] Fax: [phone]
German Office München, Germany Phone: [phone] Fax: [phone]
French Office Roissy CDG, France Phone: [phone] Fax: [phone]
UK Office Milton Keynes, United Kingdom Phone: [phone] Fax: [phone]
Italian Office Milan, Italy Phone: [phone] Fax: [phone]
Belgian Office Zaventem, Belgium Phone: [phone] Fax: [phone]
Swiss Office Dietikon, Switzerland Phone: [phone] Fax: [phone]
Nordic Office Västra Frölunda, Sweden Phone: [phone] Fax: [phone]
Austrian Office Wien, Austria Phone: [phone] Fax: [phone]
Polish Office Warszawa, Poland Phone: [phone] Fax: [phone]
Konica Minolta (CHINA) Investment Ltd. SE Sales Division Shanghai, China Phone: [phone] Fax: [phone]
SE Beijing Office Beijing, China Phone: [phone] Fax: [phone]
SE Guangzhou Office Guangzhou, China Phone: [phone] Fax: [phone]
Konica Minolta Sensing Singapore Pte Ltd. Singapore Phone: [phone] Fax: [phone]
Konica Minolta Sensing, Inc. Seoul Office Seoul, Korea Phone: [phone] Fax: [phone]
For correct use and for your safety, be sure to read the instruction manual
before using the instrument.
• Always connect the instrument to the specified power
supply voltage. Improper connection may cause a fire
or electric shock.
• Be sure to use the specified batteries. Using improper
batteries may cause a fire or electric shock.
©2007 KONICA MINOLTA SENSING, INC. www.konicaminolta.eu
Certificate No: JQA-E-80027
Registration Date:
March 12, 1997
Certificate No: YKA 0937 154
Registration Date:
March 3, 1995
<System Configuration>
Bluetooth®Printer
(commercial product) Bluetooth®Adapter
(commercial product)
Personal computer
(commercial product)
Standard
accessories
Optional
accessories
* For information on compatible products, please contact
your Konica Minolta Sensing sales representative.
Target Mask
ø 8 mm (with glass)
CM-A1 83
Dust Cover Set
CM-A1 85
Replacement Dust Cover
(Polyolefine)
CM-A1 86
Target Mask
CM-700d
CM-600d
ø 8 mm
CM-A1 78
(w/ plate)
ø 3 mm
CM-A1 79
(w/ plate)
ø 8 mm
CM-A1 80
(w/o plate)
ø 3 mm
CM-A1 81
(w/o plate)
White
Calibration Cap
CM-A1 77
CM-700d / 600d
USB cable IF-A 17 (2 m)
Colour Data Software
CM-S100w
Hard Case
CM-A176
* For storage
AC Adapter
AC-A305
Wrist Strap
CR-A73
Zero
Calibration Box
CM-A1 82
Granular-Materials
Attachment
CM-A184
The specifications and drawings given here
are subject to change without prior notice.
If you have any questions about specifica-
tions, please contact your Konica Minolta
representative.
B027003-001