Konica Minolta PC-401 User manual

4348-7783-03 Printed in Japan
INSTALLATION MANUAL
PC-401
for Product Code 4036
Paper Feed Cabinet
NOTES
•Before installing, be sure to unplug the power cord of the machine.
•Keep all packing materials out of the reach of children.

PC-401
– 1 –
■Outline of Installation Procedures for 4036 System
When installing the machine and associated options as a system, follow the order shown
on the left.
NOTE
For the detailed installation procedures for each option, follow the instructions given
in the corresponding Installation Manual and perform the procedures correctly.
✱ Electron System Options
PC-101 PC-201 DK-501
DF-601
AD-501
JS-601
FS-501
WT-501
FS-601
OC-501
PK-501/PK-4/
PK-131
Copier/Printer Machine
HD-501
EM-301
PC-401
Dehumidifier Heater 1C
EK-501 VI-501
D-103DT-105
Electron System Options
4348U111AA

PC-401
– 2 –
■Unpacking the Paper Feed Cabinet
NOTE
When removing the Paper Feed Cabinet from its shipping carton, do not hold onto
the reinforcement bracket (indicated by the arrow in the illustration below) (as a
personal injury or a deformed frame could result).
1. Check that the following accessories are available in the box.
2. Remove protective tape from the Paper Feed Cabinet.
NOTE
Do not peel off the tape that fixes the Paper Feed Cabinet hookup harness in
position until the machine is attached to the Paper Feed Cabinet.
1 Fixing Leg...............................................................................................4
2 Fixing Leg Cover ....................................................................................4
3 Fixing Bracket ........................................................................................4
4 Shoulder Screw......................................................................................4
5 Screw (9646-0408)...............................................................................12
6 Paper Size Label....................................................................................2
7 Installation Manual (this manual) ...........................................................1
4348U125AB
4348U020AB
3
4
5
4658U021AA
4658U022AA
9646040813
7
6
4348U099AB
1 2
4348U126AA
Hookup Harness
3. Remove protective material from Paper Feed
Cabinet.
4348U104AA
4. Remove the shipping preservatives and
protective tape from the inside of the drawer.
5. Slide the drawer back in.
4348U003AB

PC-401
– 3 –
■Attaching the machine to the Paper Feed Cabinet
1. Remove the Drawer Rear Cover from the
machine (four screws).
NOTE
Be sure to remove the Drawer Rear Cover
before attempting to attach the machine to
the Paper Feed Cabinet.
4348U121AA
2. Holding onto the transportation handles at
the front and rear of the machine, place the
machine onto the Paper Feed Cabinet.
When placing the machine, use the
positioning pins in the rear of the Paper Feed
Cabinet to align the machine correctly with
the cabinet.
* Fit the rear side first.
NOTE
When attaching the machine, use care not
to apply load to the paper take-up section
of the machine.
4348U117AA
3. Peel off the tape that fixes the Paper Feed
Cabinet hookup harness in position.
4. Connect the two connectors of the Paper
Feed Cabinet hookup harness to the
machine.
4348U005AA
4348U113AA
5. Using the Fixing Brackets and Shoulder
Screws furnished with the Paper Feed
Cabinet, secure the machine to the Paper
Feed Cabinet (at two places in the rear).
4348U114AA
6. Reinstall the Lower Rear Cover which has
been removed in step 1 (four screws).
4348U116AB
7. Insert the screw driver from the hole located
at the rear panel of the Paper Feed Cabinet.
4348U127AA
8. Using the Fixing Brackets and Shoulder
Screws furnished with the Paper Feed
Cabinet, secure the machine to the Paper
Feed Cabinet (at two places at the front).
4348U021AA

PC-401
– 4 –
■Installing the Fixing Leg and Fixing Leg covers
1. Move the machine and Paper Feed Cabinet
to the installation site. Then, adjust the two
adjusters at the front to let the Paper Feed
Cabinet sit on the floor.
4348U115AA
4348U103AA 4348U102AB
2. Install the Fixing Legs at two locations in the
front shown in the illustration (six screws
furnished with the Paper Feed Cabinet).
3. Install the Fixing Leg Covers at two locations
in the front shown in the illustration
(2 Pieces).
NOTES
•Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
•Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
4348U098AA
②
①
③
①
②
③
4. Install the Fixing Legs at two locations in the
rear shown in the illustration (six screws
furnished with the Paper Feed Cabinet).
5. Install the Fixing Leg Covers at two locations
in the rear shown in the illustration
(2 Pieces).
NOTES
•Insert the Fixing Leg Covers in the direc-
tion shown by arrow until they click into
position.
•Insert the Protruded Portions of the cover
shown by the arrows into the Fixing Leg.
4348U024AD
②
①
③
①
②
③
4348U101AC 4348U102AB

PC-401
– 5 –
■Loading Paper ■Making Settings for Paper Size
1. Plug the power cord into the power outlet
and turn on the machine.
2. Press the Drawer release button and then
slide out the drawer from the Paper Feed
Cabinet.
4348U010AA
3. Align the edges of the paper stack and place
the stack into the drawer.
NOTES
•Make sure that the top level of the paper
stack does not exceed the
▼ (MAX)
paper level indicator.
•Correct any curl in the paper before load-
ing.
4348U012AA
4. Align the edges of the paper stack and place
the stack into the drawer.
NOTE
Make sure that the top level of the paper
stack does not exceed the
▼ (MAX) paper
level indicator.
4348U014AA
5. Slide the drawer back into the cabinet.
4348U013AA
1. Display the Tech. Rep. Mode screen.
(For details of how to display the Tech. Rep.
Mode screen, see the Service Manual.)
2. Touch “System Input.”
4036P031CA
3. Touch “LCT Paper Size.”
4036P034CA
4. Touch “A4” paper size key.
(This highlights the “A4” paper size key.)
5. Touch “END.”
4348P026CA

PC-401
– 6 –
■Checking the Paper Reference Position
1. Touch “Machine Adjust.”
4036P031CA
2. Touch “PRT Area.”
4036P036CA
3. Touch “Left Margin.”
4348P023CA
4. Touch “3rd” and then press the Start key.
A test print will be produced.
4348P025CA
5. Measure width A from the edge of the paper
to the pattern printed on the test print and
check that it falls within the specified range.
Specifications: 3.0 mm ± 1.0 mm
•Adjusting the Paper Reference Position
If the measured width A falls outside the
specified range, enter the correction value
using the or key.
6. Produce another test print and check to see
if width A falls within the specified range.
* If the use of the or key does not
allow the measurement to fall within the
specified range, perform the following steps.
C4658U028AA
A
Paper Exit
Direction
7. Press the Drawer Release button and then
slide out the drawer from the Paper Feed
Cabinet.
4348U010AA
8. Pull the release of Right Door and open the
Right Door.
9. Loosen the adjusting screw and turn screw D
clockwise or counterclockwise as necessary.
NOTE
Use care not to damage or dent the paper
path surface inside the Right Door.
4348U011AA

PC-401
– 7 –
■Installing the Ornamental Cover
■Affixing the Paper Size Label
•If width A is greater than the specified value,
turn screw D counterclockwise.
4002U106AA
D
•If width A is smaller than the specified value,
turn screw D clockwise.
4002U105AA
D
10. Load paper and let the machine produce
another test print. Then, check width A.
* Make the adjustment until width A falls within
the specified range.
11. Tighten the adjusting screw.
12. Touch “END.”
13. Touch “Fin. Time” on the Tech. Rep. Mode
screen.
1. Press the Paper Descent button and then
slide out the drawer from the Paper Feed
Cabinet.
2. Install the Ornamental Cover attached to the
machine (two screws).
3. Slide the drawer back in.
4348U050AA
4348U010AA
1. Affix the Paper Size Label furnished with the
Paper Feed Cabinet to the location shown in
the illustration.
4348U007AA