Koolatron LENTEK Sila IO-41 Manual

instruction
guide
Creating Solutions for a Healthier Environment.
™
Lentek has developed the Air Energizing Technology to help breakdown the
impurities in the air. It helps to destroy pollen, flying dust, mold, mildew, fungi,
bacteria, pet dander and more. For allergy and hay-fever sufferers this is great
news.
By introducing negative ions, using Lentek’s Air Energizing Technology, to pol-
lutants, such as dust, smoke, soot and pollen, the combined molecules drop to
the ground, significantly reducing
the number of pollutants present.
The Super Oxidating Sanitizer
(SOS) process will also help rid
fabric of odors. The SOS process
helps to permanently oxidize:
• Bacteria • Viruses
• Fungus • Molds
• Mildew • Pollen
• and any type of
organic odor.
© 2002 Lentek International. All rights reserved. INSTREVIO41-0602
All specifications are subject to change without notice.
Dimensions are approximate.
IO•41
This Limited Warranty is effective upon purchase.
Please complete the attached Registration and return to Lentek
International.
1. Lentek International warrants this product to be free of manufacturing
defects. Should any such defect develop or become evident within
ONE year from the date of purchase, Lentek International will replace
the entire product or, at its option, repair or replace the defective
part(s) without charge.
2. Securely pack the entire unit. Be sure carton clearly identifies sender
by name and address. Attach a letter or card describing the defect.
Original receipt of purchase must be included in returned package for
warranty coverage.
3. This warranty is void if damage or malfunction is due to abuse or failure
to operate product in accordance with instructions and on recom-
mended electrical current.
Mail prepaid via insured parcel post to:
LENTEK INTERNATIONAL • WARRANTY DEPARTMENT
1629 PRIME COURT • SUITE 800 • ORLANDO, FL 32809
LENTEK WARRANTY
Purchase Date ______________
LENTEK INTERNATIONAL, INC.
PO Box 593812
Orlando, FL 32859-3812
Phone: 407•857•8786
Fax: 407•857•4045
Toll Free: 888•3LENTEK
E-Mail: [email protected]
™
retainer rings off each end of the roller. To clean your lint brush, just rinse
under tap water. The lint and/or hair will come right off. With a soft cloth,
dry off excess moisture from the roller before reattaching. Never wash
the brush attached to the handle, doing so will damage the unit and
void the warranty.
*To purchase additional lint rollers call 888-3LENTEK.
REATTACHING THE ROLLER:
Attach the retainer rings to each side of the roller. Slide the roller back
onto the unit (retainer ring with locking ridge facing up) gently until the
roller clicks into place.
THE TECHNOLOGY BEHIND THE IO-41

FUNCTIONS:
compartment lid screw (see illustration B) and slide the lid toward the han-
dle of the unit and remove. Snap in the battery. Slide the lid back into
place and secure. Reattach the lint roller to the unit.
POWER ON:
To activate the cleansing power, simply press the power button on the
brush handle (see illustration C). The LED should flash with a ‘green’ light.
This indicates that the power is on. If the LED flashes with a ‘red’ light, it
means that the battery is low and needs to be replaced for optimum per-
formance.
LED INDICATORS:
GREEN LED - flashes during ‘ON’ duration.
RED LED - will flash when the battery is low.
A
Washable Lint Roller
Convenient Hanger Hole
Zyonic
Output
ON/OFF
Button
LED
B
Battery
Compartment
Lid Screw
Retainer Ring
Retainer Ring
Dear Customer,
Thank you and congratulations on your purchase of this
ingenious device. This product is the latest in new tech-
nology from Lentek™. We back our product with a one (1)
year limited warranty. Your satisfaction is very important
to us.
Visit our website at: www.lentek.com and view the rest
of our products, such as our Silã®line, Pet Appliance™,
Biagianté™and PestContro®pest control devices. While
you’re there, register your new purchase, sign up to
receive our newsletter, and learn more about our company.
Questions can also be asked on our website, or you can
call: 1-888-353-6835, or 407-857-8786 or contact your
local Lentek dealer.
We look forward to serving you, now and in the future.
Enjoy!
Joe Lou
Joe Durek Lou Lentine
CEO President
GETTING STARTED:
LOADING THE BATTERIES:
This unit requires one (1) 9 volt battery (not included). The battery
compartment is on the back of the unit, underneath the lint roller. Slide
the washable lint roller off the unit (see illustration A). Loosen the battery
USING YOUR LINT ROLLER:
For full effectiveness, brush your garment
with slow steady strokes. Make sure that the
Zyonic output slot is on the side facing your
clothes (see illustration D). You should be able
to smell the difference after just a few minutes
of brushing.
CLEANING YOUR LINT ROLLER:
Remove the roller from the handle by applying
gentile pressure with your thumbs. Slide the
C
D