KOSPET HOPE User manual

The world’s first ceramic smartwatch
with 3GB+32GB big memory

Dear customer, Thank you for choosing Kospet products, in order to ensure the best
performance of equipment and to avoid dangerous, please carefully check and follow all
safety information before use:
Security Information
1.In the gas station, chemical plants and other electronic products prohibited places in
public, please comply with the products relevant provisions, keep off.
2. Radio waves generated by the equipment may affect the normal operation of the
implantable medical device or personal medical equipment. If you use these medical
equipment, consult your manufacturer for conditions of use of this equipment.
1
9. Before using this product, please use the matching parts full of electricity, after repeated
charge and discharge the battery after the battery shows more accurate.
8. If the equipment is equipped with a non-removable built-in battery, do not replace the
battery yourself to avoid danger.
7. Do not expose the device to extremely high temperatures or around hot equipment such
as sunshine, heaters, microwave ovens, ovens or water heaters. Excessive battery may
cause an explosion.
6. Please use the equipment in the range of 0℃ -35℃, and in the temperature -20℃ ~
+45℃ within the equipment storage and accessories. When the ambient temperature is
too high or too low, it may cause equipment failure.
5. Use only accessories approved by the equipment manufacturer and with this model, if
used other types of accessories, may cause or cause a safety incident.
4. Use of an unapproved or incompatible power supply, charger, or battery may cause a fire
explosion or other hazard.
3. The radio waves generated by the electronic product may interfere with the safe flight of
the aircraft. Please follow the requirements of the airline to keep the product in a shutdown
state.

Category Details
Hope
49mm* Thickness 17.5mm Length 265mm
Android7.1.1
MTK6739 1.25GHZ
3GB
32GB
1.39’AMOLED
8.0MP(5.0MP software update)
620mAh
Yes
Yes
Pogo
GSM:850/900/1800/1900
WCDMA:850/1900/2100MHz
TD-SCDMA:B34,B39
TDD LTE:B38,B39,B40,B41
FDD LTE:B1,B2,B3,B5,B7,B8,B12,B17,B20
2.4GHz/5GHz 802.11 a/b/g/n
Ver4.0
G-sensor. Heart rate sensor, pedometer, special actio
trigger sensor
GPS/GLONASS
Nano SIM Card
Model
Size
System
CPU
RAM
ROM
Display
Camera
Battery
Speaker
MIC
USB Type
Network
WIFI
Bluetooth
Sensor
GPS
Card
Product configuration
2

3
Shortcut Key
Power Key

This product supports NANO SIM card, does not support hot swap, before loading SIM
card, please ensure that the phone is turned off.
WARNING: The SIM card slot position is prohibited from dust and water,so as not to
damage the product.
In the standby mode, press the power button to lock the screen.
In the second menu interface, press the power button to return to the previous menu
function.
In standby mode, long press the power button 2s to adjust the multi-function menu.
When the phone crashes or system carton suddenly, long press the power button 8s can
be forced to restart.
In the card state, tap the shortcut key to quickly switch the flight mode.
This product uses a dedicated pogo interface data cable, the data line with magnetic, in
the state of charge, the data line interface is strictly prohibited contact with other metal
products, so as to avoid short circuit risk.
Turn off the power button 3s boot.
You need to manually remove the SIM card back cover on the back of the watch and
insert your SIM card.
Use of SIM card
Power key /lock screen key /return key
Hot key
USB data cable
Hardware instructions
4

1. Press the power button to turn on the watch, set up height, weight and walk target.
2. Scan QR to install wiiWatch2 APP at phone
Connect the Smartphone
5

Touch The Future

3. Turn on bluetooth on your phone
4. Open WiiWatch2 APP at phone click"To see WiiWatch" then scan QR on the watch.
Connect the Smartphone
6

5. Click " pairing button on the watch and phone
6.Successful connection as below picture shows
4. Open WiiWatch2 APP at phone click"To see WiiWatch" then scan QR on the watch.
Connect the Smartphone
7

In the dial interface, press the screen, enter the switch to the other dial function, according
to their own needs to drag the left and right to change the dial display.
Dial to the right, click +to enter the server to get more dial.
System software instructions
Dial set
8

A: 1. Check whether the system set by the watch is consistent with the mobile phone
system.
A: 1.Check whether the phone is turned off when the connection is disconnected, check
whether the system management software in the phone has forced to shut down
Wiiwatch.
A: 1. watch can only control the android /ios native camera and music applications, can
not control third-party applications.
2.Only the mobile phone can use the volume keys to take pictures of the device, you can
use the watch to control the camera function.
A: 1. Because of the limited space inside the phone and in order to better waterproof
and sealing performance, resulting in equipment running heat spread slowly. When your
device is obviously hot, it is recommended that you do not use multiple applications at the
same time Or stop using WIFI Internet and other application consumption of more energy.
http:/bbs.kospet.com
@Kospet.official
[email protected]
2. verify that the phone is connected to other Bluetooth devices and that there is a
disconnection.
3. Restart the phone and restart the smartwatch or restore the factory settings.
2. Confirm that the watch/ phone Bluetooth is on normally.
4. Reboot the device or restore the factory settings.
3.Confirm that the connection is made according to the corresponding Android/IOS
operation procedure.
Q1: The watch can not connect to the phone?
Q2: The watch is often disconnected from the phone?
Q3: watch can not control the phone music, taking pictures?
Q4: The issue of watch fever?
Common problem
9