KOSPET MAGIC 2 User manual

MAGIC 2

User Manual
1
1.Information Regarding Safe Usage:
Thank you for choosing KOSPET products. To ensure the best performance of
the device, please read and follow all the safety information carefully before
using it.
1) In gas stations, chemical plants and other public places where the usage of
electronic products is prohibited, please observe the relevant regulations of the
area and keep a certain distance from these places when using the device.
2) The radio waves generated by this device may affect the normal operation of
implantable medical devices or personal medical devices. If you are using these
medical devices, please consult the medical device manufacturer for the
conditions of using these devices and follow their directions.
3) Radio waves generated by electronic devices may interfere with the safe flight
of the aircraft. Please follow the airline's requirements to keep the device off while
you are flying.
4) This device can work normally in an environment with a temperature of 0 ~
35℃.The device with its accessories can be stored in a place with a
temperature of -20 ℃~ + 45 ℃. A temperature too high or low may damage the
device and cause malfunctions.
5) Do not expose the device to extremely high-temperature environments like
scorching sun rays or around high-temperature devices like heaters, ovens,
microwave ovens, or water heaters. High-temperature environments may cause
battery explosions or other safety accidents.
6) This product uses a non-removable lithium-polymer battery. To avoid
accidents, non-professionals are not suggested to disassemble the battery.
7) Before using this product, please charge the product for 1-2 hours with original
accessories and a safety-certified charger.
8) Some KOSPET products are equipped with magnetic charging cables. Please
keep the charging device away from other metal objects, or the magnet attraction
between the charging device and other metal objects might result in a short circuit
fire or other accidents.
9) This product is not a medical device，the detected heart rate, blood pressure
or other health-related values are for reference only and cannot be used as a
clinical basis.

User Manual
2
2.Product configuration:
MAGIC 2
HS6620D
128KB + 128MB
Metal
Silicon
1.3 ”TFT 360 * 360 pixels
Capacitive touch screen
200mAh lithium polymer battery
Support
BLE4.0
Support
N / A
Support
Support (test result is for reference only)
Support
30 built-in sports modes, such as running,
ball sports and etc,.
Support
IP67
Support
Support
Support
N / A
Support Android 5.1 or iOS 9.0 and above
Wear Fit
English, German, Spanish, Japanese, French,
Russian,Italy，Polski，Dutch，Chinese, Etc.
Product model
Processor
RAM+ROM
Watch material
Strap material
Display
Touch screen
Battery
Vibration
G-sensor
Bluetooth
GPS
Heart rare monitor
Pedometer
Blood oxygen
Sport mode
Sleep monitoring
Waterproof level
Information reminder
Sedentary reminder
Drink water reminder
Bluetooth call
Compatible system
APP name
System language

User Manual
3
Power button
/Home button
Strap
Charging interface
Heart rate sensor
Display screen
Appearance description:
Support
Strap

User Manual
4
3.Charging:
1) Before you use the watch for the first time, please charge the watch for more
than 30 minutes to ensure that the watch has sufficient power.
4. How to connect your watch with smartphone:
1) Scan the following QR code with your phone to download the Wear Fit App.
2) In daily use, it is recommended that you choose a charger with an output
voltage / current of 5V / 500Ma.
3) The data cable uses a magnetic suction interface. It is forbidden to touch
other metal conductors during charging, otherwise there will be a risk of fire.

User Manual
5
2) Turn on the phone's Bluetooth and start the Wear Fit application on the phone.
3) Give all the necessary permissions for the Wear Fit application.

User Manual
6
2) Turn on the phone's Bluetooth and start the Wear Fit application on the phone. 4) On the Wear Fit startup page, select a login method (Direct access/Slign
in/Third party login) to enter.
5) Click Mine-Connection management.

User Manual
7
6) Click “connect band” to start searching for devices.
7) Select KOSPET MAGIC 2 to start connecting the device.

User Manual
8
8) Tap “Pair” to connect the watch with the smartphone.
Wear Fit App-Mine setting:
1) Personal Information: Set your age, height, weight, step length and other
information in order to record your movement distance more accurately.
5. Wear Fit App setting:

2) Set unit of measure attributes such as length, weight, temperature and etc,;Set
the sleep monitoring start time.
User Manual
9
Device management:
1) Connection Management: Smartwatch can be connected or disconnected.
or

User Manual
10
2) Smart Reminder: You can set Call reminder, Message reminder, Alarm clock
reminder, sedentary reminder, App notification, Set quiet hours and etc,.
3) Hand-UP Screen: After turning on this function, the display will be waken up by
a wrist lift.

User Manual
11
4) Hourly Measure: When this function is turned on, the smart watch will
automatically test your heart rate, blood oxygen and other data every hour.
5) Firmware update: You can update the latest firmware here.

User Manual
12
Settings:
1) 12 Hours System- When this function is turned on, the time format of the watch
will be set to 12-hour clock, and when turned off, it will default to 24-hour clock.
2) Clear Cellphone Data: Clear all health measurement data on the phone.

User Manual
13
2) Reset Bracelet: Reset smartwatch to factory settings.
Extended functions +:
1) Take Exercise: To use this function, you need to register Wear Fit and log in
to your account;Bring your phone and watch while running to record your
movement track in real time.

User Manual
14
2) Find Bracelet: Find your smartwatch on your phone.
2) Photograph: After entering this function, shake the watch to control the
phone to take pictures.

User Manual
15
1) Click the Weekly Report icon in the upper left corner to view the weekly health
report.
Home page:
2) Click the Measure icon in the upper right corner to start all health function tests
supported by the watch.

User Manual
16
3) Click the middle area to view real-time sports data.
Swipe down to enter Shortcut bar:
1) Do not disturb: Turn on or turn off syncing phone messages, or set as an
intelligent reminder.
6. Operation instructions:

User Manual
17
2) Flashlight: The screen will stay on after turning on, press the power button to
exit.

User Manual
18
2) Brightness: adjust the screen brightness.
Swipe up to enter the menu:
1) Status: Show the exercise steps for the day.

User Manual
19
2) Message: View the latest synced phone message.