KOSPET RAPTOR User manual

Raptor

User Manual
1.Information Regarding Safe Usage:
Thank you for choosing KOSPET products. To ensure the best performance of
the device, please read and follow all the safety information carefully before
using it.
1) In gas stations, chemical plants and other public places where the usage of
electronic products is prohibited, please observe the relevant regulations of the
area and keep a certain distance from these places when using the device.
2) The radio waves generated by this device may affect the normal operation of
implantable medical devices or personal medical devices. If you are using these
medical devices, please consult the medical device manufacturer for the
conditions of using these devices and follow their directions.
3) Radio waves generated by electronic devices may interfere with the safe flight
of the aircraft. Please follow the airline's requirements to keep the device off while
you are flying.
4) This device can work normally in an environment with a temperature of 0 ~
45℃.The device with its accessories can be stored in a place with a
temperature of -20℃~ +55℃. A temperature too high or low may damage the
device and cause malfunctions.
5) Do not expose the device to extremely high-temperature environments like
scorching sun rays or around high-temperature devices like heaters, ovens,
microwave ovens, or water heaters. High-temperature environments may cause
battery explosions or other safety accidents.
1

User Manual
6) This product uses a non-removable lithium-polymer battery. To avoid
accidents, non-professionals are not suggested to disassemble the battery.
7) Before using this product, please charge the product for 1-2 hours with original
accessories and a safety-certified charger.
8) Some KOSPET products are equipped with magnetic charging cables. Please
keep the charging device away from other metal objects, or the magnet attraction
between the charging device and other metal objects might result in a short circuit
fire or other accidents.
9) This product is not a medical device，the detected heart rate, blood pressure
or other health-related values are for reference only and cannot be used as a
clinical basis.
2.Product configuration:
KOSPET Raptor
nRF52832
64KB+64M
Metal+PC
Silicon
1.3” TFT 320*320 pixels
Model
CPU
Memory
Body Material
Strap
Display
2

User Manual
Capacitive touch screen
230mAh Lithium polymer battery
Support
Bluetooth 4.0
Support
Not support
Support
Support
Built-in 20 sports modes
Support
IP68
Support (Setting via Da Fit APP)
Support (Setting via Da Fit APP)
Not support
Above Android5.1 or ios 9.0
Da Fit
English, German, Korean, Spanish, Japanese,
French, Russian, Arabic, Ukrainian, Italian,
Portuguese, Chinese, Traditional Chinese
Touch Screen
Battery
Vibrate
G-sensor
Bluetooth
GPS
Heart rare monitor
Pedometer
Sports Mode
Sleep Monitor
Water proof
Message reminder
Sedentary remind
Bluetooth calling
System support
Assistant App
Language support
3

User Manual
4
Appearance description:
Charging interface
Heart Rate Sensor
Power button
Home button
Strap
Display Screen
Strap

User Manual
5
3.Charging:
1) Before you use the watch for the first time, please charge the watch for more
than 30 minutes to ensure that the watch has sufficient power.
2) In daily use, it is recommended that you choose a charger with an output
voltage / current of 5V / 500mA.
3) The data cable uses a magnetic suction interface. It is forbidden to touch
other metal conductors during charging, otherwise there will be a risk of fire.

User Manual
2) Turn on the phone's Bluetooth and start the Da Fit application on the phone.
6
4. How to connect your watch with smartphone:
1) Scan the following QR code with your phone to download the Da Fit App.

User Manual
3) Give all the necessary permissions for the Da Fit application.
4) Set your age, height, weight and other information on Da Fit.
7

User Manual
6) Select Raptor to start connecting the device.
5) Click Device-Add device on Da Fit to start searching for devices.
8

7) Tap pairing on the phone,allow Da Fit access to mobile notifications and
location.
8) Successful connection between watch and mobile phone.
User Manual
9

User Manual
1) WATCH FACES: Customize the dial background through the Da Fit dial
function, or download more dials online.
5. Da Fit App settings:
10

User Manual
11

User Manual
2) NOTIFICATIONS: Set to turn on or off notifications for calls, messages, and
other third-party applications.
12

User Manual
4) SHUTTER: Use the watch to control the phone to take pictures.
3) ALARMS: Set alarm reminders.
13

User Manual
5) OTHERS:Set time format, 24-hour heart rate, unit conversion, do not disturb
mode, etc.
14

User Manual
6) UPGRADE: Update the watch system software through Da Fit (when new
firmware is pushed).
7) Remove Device: Remove the connection between the watch and the phone,
and you need to disconnect the Bluetooth connection in the Bluetooth settings of
the phone.
15

User Manual
2) Swipe up: Enter the application interface of graphical mode (step counting,
sleep, weather, exercise, heart rate, photo, music, breathing training).
1) Swipe down: Enter the latest sync information.
6. Watch operation instructions:
16

User Manual
3) Swipe left: Enter the menu interface of the list mode, all settings of the watch
are in this menu.
17

User Manual
18
Download Da Fit App by scanning the QR code of the watch:
7. Other operating instructions:
1) Enter the list mode menu.

User Manual
2) Click QR code.
19