Kraus Britt KPF-1690 User manual

INSTALLATION MANUAL
Britt™ Single Handle
Commercial Kitchen Faucet
KPF-1690
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I Rev. March 29, 2023

2
Congratulations on the purchase of your new
R
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

Adjustable Wrench Bucket Phillips Screwdriver Safety Goggles
Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and
parts list. If any part is missing or damaged, please contact Kraus
Customer Service at 800-775-0703 for a replacement.
·Read all instructions and safety warnings and ensure you have all tools,
parts, and equipment necessary for a safe installation.
·Turn off the hot and cold water supply at the angle stops and turn on
the old faucet to release any built up pressure. Remove existing faucet.
·Pre-drilled hole size requirement: 1 3/8" (min)
·Max countertop thickness: 3”
R
STOP
For technical assistance or replacement parts, please contact Kraus Customer
Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
Tools Required
3
Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
ACID

A. Spray Head
B. Faucet Body
C. Mounting Hardware
C1. Rubber & Metal Washer
C2. Mounting Nut
C3. Mounting Screw
D. Flange & Washer
E. Escutcheon
F. Base Plate
G. Escutcheon Mounting Hardware
G1. Bolt
G2. Plastic Nut
H. 2.5 mm Hex Wrench
B
A
H
E
F
G1
G2
D
C1
C2
C3
Diagram and Parts List
4

3/8" Compression
20 5/8"
(524mm)
1 3/4"
(46mm)
4 5/8" (116.6mm) 10 3/4" (271.6mm)
6 3/8"
(162mm)
8 1/2"
(215mm)
2 3/8"
(60.6mm)
Ø1 3/8" (34mm)
10" (255.6mm)
1/4"
(7.9mm)
* Optional Deck Plate
R1 1/4"
(30.3mm)
MAX 3"
(76mm)
1/4"
(7.9mm)
Faucet Dimensions
Installer Tip:
Shut off main water supply before installing new faucet.
5

Step 1. Remove mounting hardware
Step 2. Install the faucet assembly (without deckplate)
Shut off the water supply. Remove
the old faucet. Clean the mounting
surface. Remove the mounting
hardware (C) from the faucet body
(B).
Before installation, ensure that the
flange (D) is placed on the bottom of
the new faucet assembly (B). Insert
the faucet body through the hole in
the sink or countertop.
NOTE: Skip this step and move on to
Step 3 if installing with deckplate.
C
B
D
6
B

Step 3. Install the escutcheon
Step 4. Install the faucet assembly (with deckplate)
Before installation, remove the flange (D).
Screw the bolts (G1) into the escutcheon
(E) and ensure that the base plate (F)
is pressed onto the escutcheon (E) before
the escutcheon (E) is installed over the
three holes on the sink. From underneath
the sink or countertop, hand tighten the
mounting nuts (G2). Do not overtighten.
NOTE: Skip this step if installing without
deckplate.
Insert the faucet assembly (B) through
the hole in the escutcheon (E).
NOTE: Skip this step if installing without
deckplate.
E
G1
F
G2
B
E
7

Step 5. Secure the faucet assembly
Step 6. Connect the waterlines
Install the plastic washer and metal
washer (C1) onto the threaded
mounting shank. Thread the nut (C2)
onto the mounting shank. Lock the nut
(C2) into position by tightening the
screws (C3).
Do not overtighten.
Thread the nut (1) on the supply line
onto the outlet of the water supply
valve (2) and tighten with wrench. Do
not overtighten.
C1
C2
C3
1
2NOTE: Please make sure filter
washers are installed before
connecting to the main valve.
8

Step 7. Flush and check for leaks
Pull the hose assembly out of the
spout and remove the spray head by
unscrewing it from the hose in a
counterclockwise direction. Hold the
end of the hose down into the sink and
turn the faucet on to the warm
position. Flush water lines for one
minute to flush away any debris. Check
for leaks. Retighten any connections if
needed. Do not overtighten. Reinstall
the spray head by hand tightening it
back onto the spray hose. After
installation is completed, turn on the
hot and cold water supplies to check
for leaks.
9

Replacement Parts
1. Spray Head
2. 1.8 GPM Washer
3. Sprayer Hose
4. Inverter
5. Spring
6. Inverter
7. O-ring
8. Block
9. Washer
10. Spray Support
Assembly
11. Set Screw
12. Cartridge
13. Bonnet Nut
14. Cap
15. Handle
16. Set Screw
17. Cover Button
18. Rubber &
Metal Washer
19. Nut & Screw
20. Flange
21. Escutcheon
22. Escutcheon
Mounting
Hardware
24. 2.5mm Hex
Wrench
Replacement Finish/Color Part #
Parts List
KP27195
KP27196
KP27025
KP27026
KP27027
KP27080
KP27029
KP27030
KP27031
KP27032
KP27033
KP27035
KP27036
KP27037
KP27038
KP27001
KP27002
KP27028
KP27041
KP27184
5
6
4
7
8
911
3
2
114
18
19
20
21
22
12 13
15
16
17
10
KP27185
GR,BL**
SFS,BG,SFACB,SFSB,AB**
SFS,BG,SFACB,SFSB,AB**
SFS,BG,SFACB,SFSB,MB,AB**
KP27079
BLAB,BLBG,BLSFSB
SFS,AB,BG,SFSBMB
SFACB,SFACBMB,BGMB**
KP27020
23
GR,BL**
GR,BL**
GR,BL*
BLMB,BLSFACB,SFS*
SFS,BG,SFACB,SFSB,AB**
SFS,BG,SFACB,SFSB,AB**
SFS,BG,SFACB,SFSB,AB**
10
**Denotes faucet component color options:
SFS - Spot Free Stainless Steel
MB - Matte Black
BG - Brushed Gold
SFACB - Spot Free Antique Champagne Bronze
SFSB - Spot Free Black Stainless
AB - Antique Brass
BL - Black
GR - Gray
*Denotes spray hose assembly color options:
Spray hose assembly color options:
Black hose with Matte Black connector (BLMB);
Black hose with Spot-Free Antique Champagne
Bronze connector (BLSFACB); Spot-Free Stainless
Steel hose with Spot-Free Stainless Steel
connector (SFS); Black hose with Spot-Free Black
Stainless connector (BLSFSB); Black hose with
Brushed Gold connector (BLBG); Black hose with
Antique Brass connector (BLAB)
24
23. Filter Washer KP27167