Kraus Novus KEF-15401 User manual

Novus Single Lever Basin Faucet
KEF-15401
INSTALLATION GUIDE
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2017 Kraus USA Inc. I REV. October 25, 2017

Congratulations on the purchase of your new
Kraus plumbing xture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance, or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [e-mail]
Have the model number available, and retain a copy of your receipt
with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE

Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts list. If any part
is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
• Turn o the hot and cold water lines at the angle stops and turn on the old faucet to
release any built-up pressure
• Pre-drilled countertop hole size requirement: 1-3/8” (min)
• Max countertop thickness: 1-3/8”

Tools you will need:
1
10
279
10 31/32”
Minimum distance 90mm
Less than 90mm
Cold Water
32 3/32”
Ø35~Ø38
1
23
10
9
11
12 13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
45
7
6
8
45
67
8
Ø1 3/8”~Ø1 1/2”
815
194
7 5/8”
Ø1 3/8~Ø1 1/2”
30˚
10 11
Close
Open Left
Hot Water
Push
25˚ 90˚
12
13
8
7
Ø35~Ø38
Max35
217
8 17/32”
Max1 3/8”
9
11
12 13
2
3
4
5
6
7
8
Wrench Phillips Screwdriver Safety Goggles
Silicone Sealant
(optional)
Pipe Tape
Replacement Parts
12
7
8A
8B
8C
8D
5
9
10
43
2
1B
11
1A
1. (A) Index Button
(B) Set Screw
2. Metal Handle
3. Cartridge Cover
4. Locking Nut
5. Cartridge
6. Faucet Body
7. Rubber Washer
8. Mounting Hardware
(A) Rubber Washer
(B) Metal Washer
(C) Mounting Nut
(D) Mounting Screws
9. Aerator
10. Aerator Key
11. Hex Wrench
12. Hot & Cold Waterlines

Faucet Dimension
Installer Tip:
Shut o main water supply before installing new faucet
170mm
(6.70”)
max30
Ø35
149mm
(5.86”)
125mm
(4.92”)
83mm
(3.26”)
(1.18”)
(1.37”)

Step 1: Remove mounting hardware
Remove the mounting
screws (8D), mounting nut
(8C), metal washer (8B), and
rubber washer (8A) from the
mounting pipe
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 2: Install hot & cold waterlines
Place faucet on a soft cloth,
spout facing up. Attach the
waterlines into the base of the
faucet (HAND-TIGHTEN ONLY)
(A)Hot side left
(B)Cold side right
NOTE: Make sure O-rings are
installed on both ends of the hot
& cold waterlines

Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 3: Install faucet
Install faucet through 1-3/8”
predrilled hole in countertop.
Attach rubber washer (8A), metal
washer (8B), mounting nut (8C),
and mounting screws (8D) on the
threaded mounting pipe. Tighten
mounting nut (8C) until snug.
Tighten screws (8D) on mounting
nut (8C) with Phillips head
screwdriver until snug

Step 5: Flush faucet
Step 4: Connect waterlines to main valve
After installing faucet, remove
aerator (9) with included aerator
key (10). Turn water on for 30
seconds to remove any debris.
Reassemble aerator (9)
Connect ex water supply lines
to angle stops and tighten with
adjustable wrench. Turn on both
hot and cold main valve
Apply pipe tape (optional)
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10
Step 1 Step 2
Step 3
Step4
Step5
8A
8B
8C
8D
8A
8B
8C
8D
9
10

Trouble - Shooting
If you have followed the instructions carefully and your faucet still does not work
properly, take the following corrective steps:
PROBLEM CAUSE ACTION
Leakage under the
handle
Locking nut (4) has
come loose
Remove handle index
button (1a). Loosen
set screw (1b) with hex
wrench (9). Remove
metal handle (2).
Unscrew cartridge
cover (3) (by hand only).
Tighten locking nut
(4) with an adjustable
wrench
Aerator drips or has
inconsistent water flow
pattern
Aerator (9) is dirty or
not seated properly
Unscrew aerator (9)
with aerator key (10)
and clean out debris
Water will not shut off
completely
Cartridge may need to
be adjusted or replaced
Remove handle index
button (1a). Loosen
set screw (1b) with hex
wrench (9). Remove
metal handle (2).
Unscrew cartridge
cover (3) (by hand
only). Unscrew the
locking nut (4) with
an adjustable wrench.
Remove ceramic disc
cartridge (5). Check for
cracks
Care & Maintenance
*To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives, or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
*This installation manual is subject to change without further notice.
1
10
279
10 31/32”
Minimum distance 90mm
Less than 90mm
Cold Water
32 3/32”
Ø35~Ø38
1
23
10
9
11
12 13
Hexagon Nut
Hot
Water
Cold
Water
2 3
1
45
7
6
8
45
67
8
Ø1 3/8”~Ø1 1/2”
815
194
7 5/8”
Ø1 3/8~Ø1 1/2”
30˚
10 11
Close
Open Left
Hot Water
Push
25˚ 90˚
12
13
8
7
Ø35~Ø38
Max35
217
8 17/32”
Max1 3/8”
9
11
12 13
2
3
4
5
6
7
8

Codes/Standards Applicable:
NSF/ANSI 372
NSF/ANSI 61 ASME A112.18.1M
1.2GPM 4.5L/min maximum
GREEN
Water Eciency
LEAD FREE
IAPMOR&T
TM
FAUCET WARRANTY
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends
this warranty to the original purchaser for personal household use of the “Faucet” in its original location. The warranty
is non-transferable.
Kraus warrants the structure and nish of the product to be free from defects in material and workmanship under
normal usage for the lifetime of the product. The warranty commences from the initial date of purchase by the owner
or trade professional, from an authorized Kraus dealer, through the lifetime of the original owner or end-user.
Kraus warrants the mechanical components (such as sprayhead assembly) of the product to be free from defects in
material and workmanship under normal usage for a period of one (1) year. The warranty commences from the initial
date of purchase by the owner or trade professional, from an authorized Kraus dealer, through the one (1) year term of
the original owner or end-user.
Kraus warrants the mechanical component (cartridge) of the product to be free from defects in material and
workmanship under normal usage for a period of ve (5) years. The warranty commences from the initial date of
purchase by the owner or trade professional, from an authorized Kraus dealer, through the ve (5) year term of the
original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty
period will be repaired
or replaced with a product of equal value at the option of Kraus. This warranty
extends to the original owner or
end-user, and is not transferable to a subsequent owner.
RESTRICTIONS
This warranty does not cover antediluvian, discontinued, or display products, whether such items are purchased at
discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation, carelessness, accident, hard
water or mineral deposits, exposure to corrosive materials, misapplication, damages caused by improper maintenance,
alteration of the product, or failure to follow care or installation instructions enclosed with your product. Avoid using
abrasive cleaners such as powders, bleach, ammonia, alcohol, or
chlorine. Avoid using abrasive pads, steel wool, or
wire brushes, as these will damage and wear down the nish.
This warranty does not apply to Products that have not been installed or operated in accordance with instructions
supplied by Kraus and all applicable rules, regulations, and legiswlation pertaining to such installations.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed trade professional.
Kraus insists that such professionals have experience in the installation of bathroom and kitchen manufactured goods
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does
not allow recovery of incidental or consequential damages, such as loss of use, delay, property damage, or other
consequential damages, and Kraus accepts no liability for such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including warranties of

merchantability and tness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the rst (1) year of the warranted replacement part or product (HI, AK, and Puerto
Rico shipping charges may apply). International shipping fees are not included.
COMMERCIAL WARRANTY
Kraus extends the above warranty for a period of one (1) year to purchasers of products for industrial, commercial, and
business use.
All incidental or consequential damages are specically excluded. No additional warranties, express or implied, are given,
including but not limited to any implied warranty of merchantability or tness for a particular purpose.
Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long
an implied warranty lasts, so the above limitations or exclusions may not apply to you.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to state.
If you are a homeowner please contact a Kraus Customer Service Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
Toll-free 800-775-0703
[email protected]
If you are a plumbing contractor or trade professional please contact a Kraus
Pro Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8955
[email protected]
If you are an Authorized Partner please contact a Partner Support Representative at:
Kraus USA, Inc.
12 Harbor Park Drive
Port Washington, NY 11050
516-801-8954
[e-mail]
In requesting warranty service, please be ready to provide:
1. Proof of purchase.
2. A description of the problem.
Download the Kraus Care & Maintenance Guide at:
http://www.kraususa.com/maintenance

IMPORTANT
Register Your Kraus Product
REGISTER TODAY
http://www.kraususa.com/registration
Activate Your Warranty
Access Premium Customer Support
Get Product Information
www.kraususa.com