Kraus Fireclay Farmhouse KFR1-33GWH User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV. July 5, 2023
Fireclay Farmhouse
Kitchen Sink
KFR1-33GWH / KFR1-MWH /
KFR1-MGR
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have
any questions, require technical assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for reference.
If for any reason this product does not meet your expectations, please be sure to repack this product
in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP
R

3
Prior to Installation:
·Inspect the sink prior to installation to make sure the sink has not been damaged
during shipping.
·Observe all plumbing and building codes according to your state requirements.
·Additional floor and wall preparation may be required to avoid damaging the
sink.
·Not recommended to be installed with laminate countertop.
·Note: Before installation, please check that the drain kit complies with ASME
A112.18.2/CSA B125.2 and with CUPC certification.
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for
installing a Kraus Sink. Should there be any discrepancies, Kraus cannot be held liable. It is
recommended to install all Kraus products by hiring a licensed professional.
STOP
Cleaning & Maintenance:
Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe
the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the
sink. Do not leave sharp objects on the surface of the sink for an extended period of time. Do not use abrasive
cleaning products, sanding tools, steel wool or bleaching products as use of such products may affect product
performance or void the warranty.
R

Tools you will need:
4
Parts List
·Sink
·Bottom Grid
NOTE: Specialized tools may be necessary to install Kraus Fireclay sinks with
countertop materials other than wood, marble or granite.
33"
838mm
18 1/4"
465mm
30 1/4"
768mm
32 1/4"
820mm
10"
254mm
Dimensions
KFR1-33
33" x 18 1/4" x 10"
ACETONE
88° 88°
R
Safety Goggles Silicone Adhesive Jig Saw Phillips Screwdriver
Acetone Tape Measure Pencil Level Screwdriver
Drill Cut Resistant Gloves
Closed Toe Shoes

5
1. Measure & Build Supports
·Measure the actual height of apron
·Build supports on inside of cabinet based on sink measurements
Installer Tip: Support options
·1 1/4" Angle Irons
·(2) 2" x 4'
·3/4" Plywood
SUPPORTS
NOTE: Due to the typical ±3mm
side wall variance in manufacturing,
it is recommended that you design /
modify the sink cabinet to match
your clients individual sink(s) need.

6
2. Cut Cabinet Front
·Measure height of apron front. Add 1
16" to the dimension when you
mark base cabinet front cutout. Use jigsaw to cut.
NOTE: Please use the appropriate saw that best fits your
countertop material.
! CAUTION - To avoid the risk of personal injury, wear safety glasses
and cut resistant gloves with non-slip grip when cutting.

7
3. Install Sink
·Place sink in opening. The weight of sink should be sustained
by the built supports.
·Make sure sink is leveled from front to back and side to side
·Uses silicone to fill in gaps where necessary
NOTE: This sink is reversible. Pick which apron you'd like facing
forward before installing.
Kraus

8
4. Cut Countertop
·Due to the custom nature of this type of installation, no cutout
template is included.
·Kraus recommends providing the cabinet maker with the actual sink to
be installed prior to the cabinet fabrication.
·It is recommended that the sink be installed with an approximately 1/8"
positive reveal. It is further recommended that the installer(s) discuss
this with the customer and agree that this finished appearance is the
desired effect.
Kraus
NOTE: Please use the appropriate saw that best fits your
countertop material.
! CAUTION - To avoid the risk of personal injury, wear safety glasses
and cut resistant gloves with non-slip grip when cutting.
R

9
Installer Tip: Use acetone or denatured alcohol to remove any excess
sealant.
5. Install Countertop
·Use a bead of silicone (or preferred adhesive) around the rim of the
sink. Check the alignment of the sink to the cutout in the countertop.
Place countertop cutout hole over sink and press firmly.
Silicone Adhesive
Kraus

10
6. Installing Plumbing and Fixtures
·Connect drain, trap to drain and water supply connections to the faucet
according to manufacturer's instruction.
·Run water into sink and check for leaks.
Kraus