Kraus Turino KFDW1-33 User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2023 Kraus USA Plumbing LLC I REV. February 1, 2023
Fireclay Dual Mount
Workstation Kitchen Sink
KFDW1-33
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have
any questions, require technical assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for
reference.
If for any reason this product does not meet your expectations, please be sure to repack this
product in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP
R

3
Cleaning & Maintenance:
Clean your sink on a regular basis with warm soapy water. Rinse the sink after using cleaning products. Wipe
the sink surface with a soft cloth to remove any liquid residue. Do not cut food directly on the surface of the
sink. Do not leave sharp objects on the surface of the sink for an extended period of time. Do not use
abrasive cleaning products, sanding tools, steel wool or bleaching products as use of such products may
affect product performance or void the warranty.
For technical assistance or replacement parts, please contact Kraus Customer Service and one of our
representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
While these step-by-step instructions are intended to assist in the safe installation of a Kraus sink, this product
is likely to perform best when installed by a licensed professional. The failure to follow these instructions or to
hire a professional when needed may result in personal injury or property damage and may void the warranty.
Prior to Installation:
·Make sure that you have all necessary parts by checking the parts list. If any part is missing
or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement.
·Inspect the sink prior to installation to make sure that it has not been damaged during
shipping.
·Read all instructions and safety warnings and ensure you have all tools, parts, and equipment
necessary for a safe installation.
·Use the cut-out template provided by Kraus.
·Observe all plumbing and building codes according to your state requirements.
·To reduce the risk of personal injury, wear eye protection complying with ANSI standard
Z87.1+ and cut resistant gloves complying with EN388 with non-slip grip when cutting or
drilling, or when handling the sink and wear closed toe shoes at all times during installation.
·Note: Before installation, please check that the drain kit complies with ASME A112.18.2/CSA
B125.2 and with CUPC certification.
·Additional floor and wall preparation may be required to avoid damaging the sink.
·Make sure to purchase the correct cabinet for your kitchen sink. Base cabinets should be 3"
larger than the actual size of the sink.
·Not recommended to be installed with laminate countertop.
STOP
R

Tools you will need:
4
NOTE: Specialized tools may be necessary to install Kraus Fireclay sinks with
countertop materials other than wood, marble or granite.
Dimensions
KFDW1-33
33 1/8" x 19 1/2" x 10"
R 5/8"
(15mm)
33 1/8" (842mm)
30 1/2" (775.65mm)
19 1/2" (497mm)
17" (430.76mm)
15 3/4" (400.27mm)
4 3/8" (112mm)
3 1/2"
(90mm)
10"
(254mm)
Safety Goggles Silicone Adhesive Jig Saw Phillips Screwdriver
Putty Knife Tape Measure Pencil Scissors Screwdriver
Drill Cut Resistant Gloves
Closed Toe Shoes

5
1. Measure & Build Supports
·Build supports on inside of cabinet based on sink measurements
Installer Tip: Support options
·1 1/4" Angle Irons
·(2) 2" x 4'
·3/4" Plywood
NOTE: Due to the typical ±3mm side wall
variance in manufacturing, it is recommended
that you design / modify the sink cabinet to
match your clients individual sink(s) need.
SUPPORTS
Undermount Installation

6
2. Install Sink
·Place sink in opening. The weight of sink should be sustained
by the built supports.
·Make sure sink is leveled from front to back and side to side
·Make sure the top of the sink is flush with the top of the cabinet
·Uses silicone to fill in gaps where necessary

7
3. Cut Countertop
·Kraus recommends providing the cabinet maker with the actual sink to be installed
prior to the cabinet fabrication.
·It is recommended that the sink be installed with an approximately 1/8" positive
reveal. It is further recommended that the installer(s) discuss this with the customer
and agree that this finished appearance is the desired effect.
! CAUTION - To avoid the risk of personal injury, wear safety glasses
and cut resistant gloves with non-slip grip when cutting.
NOTE: Please use the appropriate saw
that best fits your countertop material.

8
Installer Tip: Use acetone or denatured alcohol to remove any excess sealant.
4. Install Countertop
·Use a bead of silicone (or preferred adhesive) around the rim of the sink. Check the
alignment of the sink to the cutout in the countertop. Place countertop cutout hole over
sink and press firmly.
Silicone Adhesive

9
5. Installing Plumbing and Fixtures
·Connect drain, trap to drain and water supply connections to the faucet according to
manufacturer's instruction.
·Run water into sink and check for leaks.

10
1. Measure & Build Supports
·Build supports on inside of cabinet based on sink measurements
·The supports should be flush with the top of the cabinet
Installer Tip: Support options
·1 1/4" Angle Irons
·(2) 2" x 4'
·3/4" Plywood
NOTE: Due to the typical ±3mm side wall
variance in manufacturing, it is recommended
that you design / modify the sink cabinet to
match your clients individual sink(s) need.
SUPPORTS
Top Mount Installation