Kraus Urbix FF-101 User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2022 Kraus USA Plumbing LLC I REV. February 8, 2022
UrbixTM Industrial Stand Alone
Filtration Faucet
FF-101
R
INSTALLATION GUIDE

Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP
2
R

Care & Maintenance
* To keep the product clean & shining, follow the steps below:
1. Rinse with clean water & dry with a soft cloth
2. Do not clean with soaps, acid, polish, abrasives or harsh cleaners
3. Do not use cloth with a coarse surface
4. Unscrew the aerator and clean when necessary
* This installation manual is subject to change without further notice.
ACID
Tools Required
Adjustable Wrench Phillips Screwdriver Supply Lines
3
Prior to Installation:
·Make sure you have all necessary parts by checking the diagram and parts list. If any
part is missing or damaged, please contact Kraus Customer Service at 800-775-0703
for a replacement.
·Read all instructions and safety warnings and ensure you have all tools, parts, and
equipment necessary for a safe installation.
·Turn off the hot and cold water supply at the angle stops and turn on the old faucet
to release any built up pressure. Remove existing faucet.
Clean sink or countertop to remove any debris, plumber’s putty, or
silicone.
·Flush angle stops to release any debris prior to installation.
·Pre-drilled hole size requirement: 1 1/4" (min)
·Max countertop thickness: 3 1/16"
Safety GogglesSilicone Sealant
STOP
R

Diagram and Parts List
4
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
C
D
E
F
G
A. Faucet Assembly
B. Flange
C. Rubber Washer
D. Metal Washer
E. Mounting Nut
F. Connector 3/8"
G. Connector 1/4"
A
B
R

Installer Tip:
Shut off main water supply before installing new faucet.
Faucet Dimensions
5
5 3/8”
[135mm]
9 3/8“
[238mm]
11“
[278mm]
3 3/4“
[94mm]
1 3/4”
[45mm] 2 3/8”
[59.5mm]

Step 1: Preparing for installation
Remove the rubber washer (C),
metal washer (D), and mounting
nut (E) from the end of the stud.
Step 2. Installing the faucet assembly
6
C
D
E
A
C
D
E
Place the faucet assembly (A)
through the selected hole in the
sink or countertop. On the
underside of the sink or countertop,
slide the rubber washer (C) and
metal washer (D) onto the stud.
Thread the mounting nut (E) onto
the stud, and tighten securely
using your wrench.

Step 3. Connecting the quick connect adaptor and water line
7
A
F
3/8 in. Water line from
filtration system
Thread the quick connect adaptor
(F) onto the end of the faucet
assembly (A) stud, and tighten
securely using a wrench. Connect
the 3/8 in. water line from the
filtration system by pushing the
line into the connector (F). Pull
down on the 3/8 in. line slightly to
ensure the quick connect fitting
has engaged.
Note: A 1/4" connector (G) is
included for 1/4" water lines.

Replacement Parts
8
Replacement Parts List Finish/Color Part #
KP44046
KP44047
KP44056
1. Locking Ring
2. O-Ring
3. Cover Button
4. Handle
5. Cartridge Cover
6. Cartridge
7. Flange
8. Rubber Washer
9. Metal Washer
10. Mounting Nut
11. Connector 1/4"
*Denotes faucet component color options:
SFS - Spot Free Stainless Steel
MB - Matte Black
BG - Brushed Gold
KP44049
KP44051
KP44048
KP44050
KP44052
KP44053
KP44054
KP44057
SFS,MB,BG,RD*
12. Connector 3/8" KP44055
SFS, MB, BG*
SFS, MB, BG*
1
2
9
3
7
5
6
8
10
11
12
4
RD - Red
SFS,MB,BG,RD*

Trouble-Shooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Leakage under faucet handle Cartridge has come loose Remove index and loosen set screw with
hex wrench. Remove the handle. Tighten
cartridge with an adjustable wrench.
Water does not shut off
completely
Cartridge may need to be
adjusted or replaced.
Remove index and loosen set screw with
hex wrench. Remove the handle . Tighten
cartridge with an adjustable wrench.
Remove the cartridge. Check for cracks.
PROBLEM CAUSE ACTION
9

Faucet
Kraus USA Plumbing, LLC (“Kraus”) extends this warranty to the original purchaser for personal household use of the
Faucet when purchased from an authorized Kraus dealer and in the location of original installation. This warranty is
non-transferable.
Kraus warrants the structure and finish of the Faucet to be free from defects in material and workmanship under normal
usage for as long as the original purchaser resides in the residence in which the Faucet was first installed.
Kraus warrants the Faucet's sprayhead assembly (including the engine, aerators, structure, restrictors, back flow
preventers, sprayer hoses, braided supply line hoses which encompasses nylon, silicon and stainless steel) of the product
to be free from defects in material and workmanship under normal usage for a period of one (1) year from the date of
purchase.
Kraus warrants the Faucet's cartridge to be free from defects in material and workmanship under normal usage for a
period of five (5) years from the date of purchase.
Any product reported to the authorized dealer or to Kraus as being defective within the warranty period will be repaired
or replaced with a product of equal value at the option of Kraus.
Commercial Warranty
Kraus USA Plumbing, LLC (“Kraus”) warrants its Products for a period of one (1) year to commercial purchasers of
Products used in industrial, commercial and business applications.
Care and Cleaning Instructions
Certain cleaning products may cause damage to a Product's finish and use of the following on the Product will void this
warranty:
·Abrasive cleaners such as powders, bleach, ammonia, alcohol or chorine
·Abrasive pads, steel wool or wire brushes
What is Not Covered
This warranty does not cover Products that were discontinued when purchased or display Products, whether such
Products were purchased at discount outlets, unauthorized dealers, and/or sold on clearance. This warranty does not
cover any free gifts included with purchase.
This warranty does not cover damage resulting from neglect, misuse (including use for an unintended application),
abuse, carelessness, accident, hard water or mineral deposits, exposure to corrosive materials, improper maintenance,
alteration of the Product, or failure to follow care, cleaning or installation instructions enclosed with your Product. Kraus
recommends that all Kraus Products be installed by a fully licensed and insured trade professional with experience in the
installation of bathroom and/or kitchen manufactured goods.
Codes/Standards Applicable:
UPC
CR
UPC
CR
NSF/ANSI 372 NSF/ANSI 61-9
ASME A112.18.1
1.0GPM 3.8L/min maximum
R