Kraus KTCS-10 User manual

www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. June 21, 2021
Automatic Sensor Waste Bin
KTCS-10
R
INSTALLATION MANUAL

2
Congratulations on the purchase of your new
Kraus plumbing fixture!
Please keep the box and packaging materials until your product is
completely installed. If you have any questions, require technical
assistance or have any problems with your product:
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your
receipt with purchase date for reference.
If for any reason this product does not meet your expectations,
please be sure to repack this product in the original box and
packaging material to avoid damage during transit.
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
DO NOT RETURN TO STORE
STOP

3
Diagram and Parts List
ECO-Friendly
Frosted Lid
Battery Case
Touch Switch
Barrel Body
Induction Zone
and Screen
Power Switch
(Backside of the Lid)
Anti-skid Design
for Pedestal
ECO-Friendly Plastic
Inner Barrel
(Applicable Only for
Stainless Steel Bins)

44
Dimensions
10 1/4"
(260mm)
15"
(380mm)
1 1/8"
(30mm) 21 1/4" (540mm) 2"
(52mm)
24 5/8" (625mm)
11 3/8" (288.5mm)
10 1/2" (266mm)
8 1/8"
(205.9mm)
15 1/8" (385.5mm)
13 5/8" (345.2mm)
7/8"
(20.8mm)

55
Step 1. Check All Parts
Step 2. Setting Up Your Trash Can
Take out lid and inner barrel, make
sure the power switch faces you.
Remove the four black plastic packaging supports from the trash container interior.
NOTE: Failure to remove may decrease the trash can capacity and/or shred your
trash bag. The packaging supports are only a part of the packaging to prevent
distortion during transit.
2a. Remove the lid from
the Trash Can.
2b. Remove all four Plastic
Supports and please recycle.
2c. Time to install the lid.

66
Step 3. Install Batteries
Take out the battery case. Install
3 AA batteries into the case
according to the "+,-" instruction.
Put back the case and seal the
cover.
Step 4. Open the Power Switch
Press the power switch at the back
side of the lid to "l" and the
automatic sensor system will start
to work.

7
Step 5. Instructions of Sensing Function
When garbage or any part of your
body is in the sensing area (about
10-15cm), lid will open
automatically. After leaving the
sensing area, the display screen
will show a 5 second countdown.
The lid will close after the
countdown ends.
Step 6. Securing the Trash Bag
Remove the Bag Securing Unit before taking out the full trash bag.
6a. Select your Preferred
Trash Bag and Place it
inside the Trash Can.
6b. Raise the orange handles
from Bag Securing System
and wrap the lip of the trash
bag around the orange handles.
6c. Lower the handles once
wrapped and replace the Lid.

Touch Button
1. Press the OPEN/CLOSE button
on the screen to keep the lid in
the open position.
2. Press it again to close the lid.
After you press the OPEN/CLOSE
button, the lid will close
automatically after 5 seconds if no
objects are sensed.
Precautions
1. When you install batteries, please take note of the "+" and "-" instructions.
2. Be sure to use a clean cloth to clean the trash bin. Please do not use too much
water on the trash bin. Water can damage the inner elements. Do not power on
if water goes inside of the trash bin.
3. Please do not push or flip the lid to prevent the lid from damage.
4. Please replace the batteries in time to avoid liquid leaking. This situation may
damage the electric elements.
5. Avoid using the trash bin under sunlight or wet surroundings.
6. Keep the sensing area clean to ensure proper function of the sensor.
7. Please don't mix acidic batteries and alkaline batteries. Also, do not mix
rechargeable batteries and disposable batteries.
8. Please do not attempt to repair the trash bin or replace parts by yourself. This
will void the warranty.
8
OPEN
CLOSE

9
Replacement Parts
1. Battery Compartment
2. Battery Compartment Cover
3. Bag Securing Insert
Replacement Parts List Part #
KP60000
KP60001
KP60002
Troubleshooting
If you have followed the instructions carefully and your faucet still does not work properly, take the following corrective steps:
Lid unusually opening Check whether batteries are installed properly according to "+" and "-" instruction.
Check whether the sensing area is clean or not, please use a clean cloth to wipe it if
it is dirty.
Lid opens slowly Old batteries may have low power. Please replace them.
PROBLEM ACTION
Lid unusually closing Check whether the sensing area is clean or not, please use a clean cloth to wipe it if
it is dirty.
Check whether electric circuits are damp. If yes, please do not connect the power
source. You can only use the bin if it is dry.
Check whether there is any obstruction around the lid. If yes, please remove it.
NOTE: If these solutions do not work, please contact customer service at 1-800-775-0703. Do not attempt to repair the trash
bin by yourself.
1
2
3

10
Kitchen Accessories Warranty
Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc.
(“Kraus”).
Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen
Accessories” in their original location. The warranty is non-transferable.
Kraus warrants the structure and finish of the product (Kitchen Accessories) to be free from
defects in material and workmanship under normal usage for a period of one (1) years.
The warranty commences from the initial date of purchase by the owner or trade professional,
from an authorized Kraus dealer, through the one (1) year term of the original owner or end-user.
Any product reported to the authorized dealer or to Kraus as being defective within the
warranty period will be repaired or replaced with a product of equal value at the option of
Kraus. This warranty extends to the original owner or end-user, and is not transferable to a
subsequent owner.
Restrictions
This warranty does not cover antediluvian, discontinued, or display products, whether such items
are purchased at discount outlets, unauthorized dealers, and/or sold on clearance.
This warranty does not cover instances of negligence, misuse, abuse, improper installation,
carelessness, accident, hard water or mineral deposits, exposure to corrosive materials,
misapplication, damages caused by improper maintenance, alteration of the product, or failure
to follow care or installation instructions enclosed with your product. Avoid using abrasive
cleaners such as powders, bleach, ammonia, alcohol, or chlorine. Avoid using abrasive pads,
steel wool, or wire brushes, as these will damage and wear down the finish.
This warranty does not apply unless the Kraus product is installed by a fully insured and licensed
trade professional. Kraus insists that such professionals have experience in the installation of
bathroom and kitchen manufactured goods.
This warranty does not cover labor charges or costs of removal and reinstallation of said product.
This warranty does not allow recovery of incidental or consequential damages such as loss of use,
delay, property damage, or other consequential damages, and Kraus accepts no liability for
such damages.
This warranty does not cover Marine or Outdoor Installation.
Except as otherwise provided above, Kraus makes no warranties, expressed or implied, including
warranties of merchantability and fitness for a particular purpose, or compliance with any code.
Shipping charges will be covered for the first (1) year of the warranted replacement part or product
(HI, AK, and Puerto Rico shipping charges may apply). International shipping fees are not included.