Kusam-meco 108 User manual

An ISO 9001:2008 Company
®
G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct.: 022 -2 4156638, Tel. : [phone], Fax : 022 - 24149659
Email : [email protected], Website : www.kusamelectrical.com,
An ISO 9001:2008 Company
®
All Specifications are subject to change without prior notice
Navin com/D:Sandeep Gupta/New Catlog Dec 2011/KM-108.cdr
3½ DIGIT 1999 COUNTS DIGITAL MULTIMETER
8 FUNCTIONS 23 RANGES
Model 108
10Amps RANGE
FUSED
ELECTRICAL SPECIFICATIONS : 108
Accuracy : ± (% reading + digit) at 23 ± 5°C less than 75% RH.
Resolution
100 µV
1 mV
10 mV
100 mV
1 V
AccuracyRange
200 mV
2 V
20 V
200 V
600 V
DC VOLTAGE
± 2.5%
0 - 20 kHZ
AccuracyRange
FREQUENCY
Overload Protection : 500V DC / AC rms
±(0.5%rdg + 1dgt)
Input Impedance : 10MΩ
Overload Protection : 600 V DC for 15 sec on 200mV range,
600 VDC / AC on other range
Resolution
100 mV
1 V
AccuracyRange
200 V
600 V
AC VOLTAGE
±(3%rdg + 4dgts)
Input Impedance : 4.5 MΩ
Overload Protection : 600 V DC / AC
2 mA
200 mA
20 mA
10 A
100 µA
1 µA
10 µA
10 mA
Resolution AccuracyRange
DC CURRENT
Overload Protection : 0.8A/250V Fuse; 10A/ 25V fused.
Voltage Burden : 10Arange 700mV MAX.
±(2.0%rdg + 1dgt)
±(3.0%rdg + 1dgt)
Test Voltage AccuracyRange
DIODE TEST
Overload Protection : 500V DC / AC rms
1.0 ± 0.6mA 3.0V MAX ±(3.0%rdg + 3dgts)
Less than 100Ω
CONTINUITY TEST
Overload Protection : 500V DC / AC rms
Audible Sound Buzzer
SPECIAL FEATURES :
FEATURES :
GENERAL SPECIFICATIONS :
ACCESSORIES :
?10 A Fused
?High Accuracy, Large LCD, Digital reading
?Alarm Buzzer sounds when the lead is
connected to the wrong input terminals.
?Instant Continuity Buzzer.
?Battery check function
?Overload protection on all function ranges
?Recessed safety designed input jacks.
?Transistor hFE Test & Battery Test
?Diode & Continuity Test
Test Lead pair, Battery installed, User’s manual,
Carrying case, Protective Holster.
íSensing : Average Sensing.
íBasic Accuracy : ±(0.5%rdg + 1dgt)
íDisplay : 3½ digit LCD display (2000 Counts)
íDigit Size : 13.5mm
íMeasurement Rate : 2.5 measurements per
second, nominal.
íPolarity : Automatic, positive implied,
(-) negative polarity indication.
íOver range Indication : ‘1’ or ‘-1’ displayed
íOperating Temperature :
0°C to 50°C; R.H. <75%
íStorage Temperature :
-20°C to 60°C; R.H. <80%
íPower : Single, Standard 9V battery
íDimension : 151mm(L)x70mm(W)x38mm(H)
íWeight : Approx. 200g. (Including battery)
OPTIONAL ACCESSORIES :
Current Clamp CA300, Current ClampAdaptor
CA500, CA1000, CA2000, High Voltage Probe
PD-28.
0 to 1000 10 µA 2.8V ± 0.4V
Range
TRANSISTOR hFE TEST
Vce Basic DC Current
Load Current : 1.5V-150mA, 9V-6mA
Overload Protection : 500 V DC / AC rms
1.5 V
9 V
1 mV
10 mV
Test Voltage AccuracyRange
BATTERY TEST
±(3.0%rdg + 3dgts)
200 Ω
20 KΩ
2 MΩ
2 KΩ
20 MΩ
200 KΩ
1 Ω
100 mΩ
10 Ω
100 Ω
1 KΩ
10 KΩ
Resolution AccuracyRange
RESISTANCE
Overload Protection : 500V DC or AC rms
±(3.0%rdg + 3dgts)
±(1.5%rdg + 1dgt)
±(1.5%rdg + 3dgts)

TABLE OF CONTENTS
TITLE PAGE NO.
Overview..... .......................
..
International Electrical Symbols..............................
General Specifications............................................
..
DC Voltage.......................................................
AC Voltage.......................................................
DC Current.......................................................
Frequency........................................................
Resistance.......................................................
Diode & Continuity Test...................................
Transistor hFE.................................................
Battery Test......................................................
Rules For Safe Operation.......................................
The Multimeter Structure........................................
Functional Buttons..................................................
Display Symbols.....................................................
Measurement Operation.........................................
A. DC Voltage Measurement...........................
B. AC Voltage Measurement...........................
C. DC Current Measurement...........................
D. Frequency Measurement............................
E. Resistance Measurement...........................
F. Diode & Continuity Test..............................
G. Transistor hFE Test....................................
H. Battery Test................................................
Maintenance...........................................................
Test Certificate........................................................
Warranty..................................................................
.....................................
Unpacking Inspection..............................................
Electrical Specifications........................................
Features................................................................
01
02
03
03
04
05
05
05
05
05
06
06
06
06
07
09
10
11
12
12
13
15
17
18
20
22
22
23
24
25

Supply
Load

ISO 9001
REGISTERED
QC
PASS
KUSAM-MECO
This Test Certificate warrantees that the
product has been inspected and tested in
accordance with the published specifications.
The instrument has been calibrated by using
equipment which has already been
calibrated to standards traceable to national
standards.
MODEL NO._________
SERIAL NO. ___________
DATE: ___________
108

WARRANTY
Each “KUSAM-MECO” product is warranted to be
free from defects in material and workmanship
under normal use & service. The warranty period is
one year (12 months) and begins from the date of
despatch of goods. In case any defect occurs in
functioning of the instrument, under proper use,
within the warranty period, the same will be rectified
by us free of charges, provided the to and fro freight
charges are borne by you.
This warranty extends only to the original buyer or
end-user customer of a “KUSAM-MECO” authorized
dealer.
This warranty does not apply for damaged Ic’s,
fuses, burnt PCB's, disposable batteries, carrying
case, test leads, or to any product which in “KUSAM-
MECO’s” opinion, has been misused, altered,
neglected, contaminated or damaged by accident or
abnormal conditions of operation or handling.
“KUSAM-MECO” authorized dealer shall extend this
warranty on new and unused products to end-user
customers only but have no authority to extend a
greater or different warranty on behalf of “KUSAM-
MECO”.
“KUSAM-MECO’s” warranty obligation is limited, at
option, free of charge repair, or replacement of a
defective product which is returned to a “KUSAM-
MECO” authorized service center within the
warranty period.
THIS WARRANTY IS BUYER’S SOLE AND
EXCLUSIVE REMEDY AND IS IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
“KUSAM-MECO” SHALL NOT BE LIABLE FOR
ANY SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OR LOSSES,
INCLUDING LOSS OF DATA, ARISING FROM
ANY CAUSE WHATSOEVER.
All transaction are subject to Mumbai Jurisdiction.
G 17,Bharat Industrial Estate, T. J. Road,
Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct : [phone]
Tel. : [phone].
Fax : [phone]
Email : [email protected]
Website : www.kusamelectrical.com
www.kusam-meco.co.in