Kval 990-HQ User manual

Innovation, Quality & Honesty
Service Manual
Published: August 14, 2019
990-HQ Pre-Hanging Door System
990-HQ Service Manual

KVAL 990-HQ Service Manual
Proprietary Notice
This Manual is confidential and contains proprietary information and intellectual
property of KVAL Inc., and is to be used solely by Customer as an operating manual
for KVAL Inc. machines. Neither this Manual nor any of the information contained
herein may be reproduced or disclosed under any circumstances without the express
written permission of KVAL Inc. For authorization to copy this information, please
call Kval Customer Support at [phone] or fax [phone]. Outside the
U.S. and Canada, call [phone].
Manual Part Number: DOC_187_1_SRV
The 990-HQ Pre-Hanging Door System is a trademark of Kval Incorporated.
Copyright 2014 Kval Incorporated. All rights reserved.
Beckhoff® , TwinCAT 2® , and EtherCat® are registered trademarks and are licensed
by Beckhoff Automation GmbH
Windows CE® is a registered trademark of Microsoft Corporation.
All other products are trademarks or registered trademarks of their respective holders,
all rights reserved. Reference to these products is not intended to imply affiliation with
or sponsorship of Kval Incorporated.
Contacting KVAL
Customer Service: For further information about this manual or other Kval Incorpo-
rated products, contact the Customer Support Department
• Mailing address:
Customer Support Department
Kval Incorporated
825 Petaluma Boulevard South
Petaluma, CA 94952
• Phone and Fax:
In the U.S and Canada, call [phone] or fax [phone]
Outside the U.S. and Canada, call [phone] or fax [phone]
• Business hours:
Technical Support:
6:00 AM to 4:00 PM Pacific Standard Time, Monday through Thursday
6:30 AM to 1:30 PM Pacific Standard Time, Friday
Parts & Service Sales:
6:30 AM to 4:00 PM Pacific Standard Time, Monday through Thursday
6:30 AM to 1:30 PM Pacific Standard Time, Friday
(Other sales related inquiries: http://www.kvalinc.com)
• Email: [email protected]

KVAL 990-HQ Service Manual
KVAL 990-HQ Service Manual
Your Feedback is Welcome: To help us design products that make your job easier
and your business more successful, we'd like to gain your perspective about your user
experience with our product - that is, the manual, the machinery, the software, etc.
What was easy or difficult to use or to learn? If you could change something about the
design, what would it be? Please email your comments and suggestions for improve-
ment to [email protected]. (NOTE: This is not a customer support email
link. For that, please refer to the Customer Service contact information above.) Thank
you!
http://www.kvalinc.com

KVAL 990-HQ Service Manual

Table of Contents
KVAL 990-HQ Service Manual
Chapter 1 Introduction to the 990-HQ
Chapter 1 at a Glance.............................................................. 1-1
Overview of the 990-HQ Door Hanging System ..................... 1-2
About this Manual .................................................................... 1-4
Safety First!.............................................................................. 1-5
Safety Sheet Sign-Off Sheet.................................................................1-5
Safety Terminology of Labels................................................................1-5
Safety Guidelines..................................................................................1-5
Lockout-Tagout Guidelines ...................................................... 1-9
Follow the P-R-O-P-E-R lockout rule of thumb.....................................1-9
Lockout Tagout Procedure....................................................... 1-10
Pre-Steps Before Lockout Tagout .......................................................1-10
Lockout Tagout Power ........................................................................1-10
Lockout Tagout Air Supply ..................................................................1-11
Start Maintenance...............................................................................1-11
Post Maintenance Steps.....................................................................1-11
Zero-Energy to Start-Up........................................................... 1-12
Getting Help from KVAL........................................................... 1-14
On-Line Help.......................................................................................1-14
Product Return Procedure ..................................................................1-14
How to Download the Service Application ............................... 1-16
Download Application .........................................................................1-16
Safety Sign-Off Sheet .............................................................. 1-19
A Note to the Operator........................................................................1-19
Chapter 2 System IT Administration
System IT Administration......................................................... 2-2
About the 990-HQ Computer................................................................2-2
Connections on the PLC.......................................................................2-2
Backing up the Computer .....................................................................2-3
About Remote Connection to KVAL Service.........................................2-3
Network System Overview....................................................... 2-4
Connections to Servo Drives ................................................................2-5
High Frequency Panel Node Connections............................................2-6
Frame Node Connections.....................................................................2-7
Back Section Node ...............................................................................2-7
Screw Driver Nodes 1-3........................................................................2-8