KVM-TEC media4Kconnect 6930 DP1.2 User manual

MATRIXLINE FIBER MX-F
6811L CPU/LOCAL
6811R CON/REMOTE
Check out our
Installation Channel:
USER-MANUAL
kvm-tec engineered 4K
System
4K Extender DP 1.2
6930 media4Kconnect
DP1.2 Extender Set
6950 redundant
6970 uncompresed
media4Kconnect
smart connections

2 | kvm-tec
1. Introduction 5
1.1 Intended use 6
1.2 Safety intructions 7
1.3 Technical specications 9
1.4 Product Elements 10
1.5 Meaning of the Led Indicators 12
2. Extender Installation 13
2.1 Unpacking and checking the content 13
2.2 Mounting kit 14
2.2.1 Mounting (optional) 14
2.3 Installing the Extender 15
2.4 Quickinstallation & Start up 16
2.5 Replacing the SFP module 18
2.6 Removing a ber cable 19
3. Main menu & Settings 20
3. Using on screen menu 20
3.1 System Status 21
TABLE OF CONTENT

kvm-tec | 3
3.3 Update Menu 22
3.4 Settings 26
3.4.1 Dening what DDC data your PC uses 27
3.4.2 Select Keyboard Layout 28
3.4.3 Keyboard Shortcuts 29
3.4.4 Mouse Settings 30
3.4.5 Managing Local Settings 31
4. Features 32
4.1. Menu Features 32
4.1.1 Point to Point 33
4.1.2 Matrix Swithcing System 33
4.1.3 USB Save Feature 33
TABLE OF CONTENT

4 | kvm-tec
5. Maintance and Care 34
5.1. Extender Care 34
5.2 Disposal 34
6.Support & First Aid 35
7.Cable Requirements 37
7.1. Requirements for Fiber Cable 37
8. Requirements Network Switch 38
8.1. Recommended Swithces 39
9. Warranty 40
9.1. Extended Warranty 40
10. Address & Phone/Email 41
11. Notes 42
TABLE OF CONTENT

kvm-tec | 5
Congratulations on the purchase of your new media4Kconnect DP1.2 KVM Extender.
You have bought a high quality extender. These instructions are part of this product.
They contain important information regarding safety, use and disposal for every user
of the media4Kconnect DP1.2 Extender. Please familiarise yourself with the
information within prior to using your product. Use the product only in the manner as
described and for the areas of application as stated. Following proper use and
maintenance, your media4Kconnect KVM Extender will bring you
joy for many years to come.

6 | kvm-tec
1. INTRODUCTION
1.1 INTENDED USE
This product is intended as a device for professional use, for transmitting USB and video signals
over huge distances.
The product may only be used according to the instructions as described in this manual. All
use, other than that described in this manual, is seen as unintended use. Modications in the
course of technological progress are reserved. In these user instructions the media4Kconnect
DP1.2 is referred to as ‘product’ or ‘extender‘. The media4Kconnect DP1.2 /PC is referred to as
the Local unit/CPU and the media4Kconnect/Monitor is referred to as the Remote unit/ CON.

kvm-tec | 7
1. IntroductIon
1.2 SAFETY INTRUCTIONS
WARNING! Read and understand all safety instructions
• Follow all the instructions. This will avoid accidents, re, explosions, electric shocks or
other hazards that may result in damage to property and/or severe or fatal injuries.
Please ensure that everyone who uses the product has read and followed these warnings
and instructions.
• Keep all safety information and instructions for future reference and pass them on to
subsequent users of the product.
The manufacturer is not liable for cases of material damage or personal injury caused
by incorrect handling or non-compliance with the safety instructions. In such cases, the
warranty will be voided.
• This product is not intended for use by persons (including children) with restricted
physical, sensory or intellectual capability or lack of experience and/or knowledge, unless
they are supervised by a person who is responsible for their safety or provides them with
instructions on how to use the product.
• Danger ! Not for use in potentially explosive environments
• Danger! Be vigilant at all times, and always take care around this product. Do not use
electrical equipment if you are lacking in concentration or awareness, or are under the
inuence of drugs, alcohol or medication. Even a moment of inattentiveness can lead to
serious accidents and injuries when using electrical equipment. Check the product and
the cables for any damage before use. If there is any visible damage, a strong odour, or
excessive overheating of components unplug all the connections immediately and stop
using the product
• If the product is not installed and used in accordance with this manual, it may cause
disruptive interference with radio or television reception or affect other electronic
products in residential areas.
• Prior to connecting to the mains, make sure your local mains voltage matches the rating
indicated on the product.
1

8 | kvm-tec
1. IntroductIon
• The product must be connected to a permanent and earthed AC wall socket•
• Protect the cables from tension, crushing and buckling and lay them so that
people cannot trip over them.
• Use the device with a suitable, properly installed and easily accessible power outlet.
• Unplug the appliance during lightning storms or when not in use.
• Danger ! Never touch the adapter with wet hands.
• Use the product within the specied performance limits.
• Do not place the product near heaters
• Do not drop or hit the product.
• Unplug all connections before cleaning the product. Do not use wipes or chemicals
as these could damage the surface. Wipe the housing with a damp cloth. Electrical/
electronic parts must not be cleaned
• Alterations to the product and technical modications are not permitted
• Use the device with a suitable, properly installed and easily accessible power outlet. The
appliance plug serves as a disconnection point.

kvm-tec | 9
1. IntroductIon
1.3 TECHNICAL SPECIFICATIONS
Type: KVM Extender (local unit-CPU und remote unit-CON)
Model: media4Kconnect Fiber KVM Extender
Power plug input voltage 1 x 12 VDC 2 A
external Power supply
supply tolerances DC: +20% / -15%
Redundant
Power supply 12 VDC > 2A
Power requirement 12W withoutUSB devices
Operating
temperature 0 ºC to 45 ºC (32 bis 113 °F)
Storage semperature −25 ºC bis 80 ºC (-13 to 176 °F)
Relativ humidity: max. 80% (not condensing)
Casing material: anodized aluminum
Dimension: Local (CPU): B104 x H32 x D175 mm/B4.2 x H1.69 x D7.2 4inch,
610g/1.34 lb.
Weight Remote (CON): B104 x H32 x D175 mm/B4.2 x H1.69 x D7.2 4inch,
620g /1.36lb.
Shipment weight 3040g/ 6,7 lb.
Expected product life 82 820 hours / 10 years
1

10 | kvm-tec
1. IntroductIon
1.4 PRODUCT ELEMENTS
Local Extender (CPU)
Nr. Name Function
1. DC Connection for 12V/2A power supply 1 1
2. DC Connection for 12V/2A power supply 2
3. Status LED Status LED for Network secondary
4. Status LED Status LED for Netzwerk main
5. kvm-link Connection for bercable main
6. kvm-link Connection for bercable secondary
7. dp out DisplayPort 1.2 outoput to monitor
8. USB USB 2.0 to keyboard/ mouse etc.
9. Power/Status LED Display of Extender Status
usb dp kvm-link
media4Kconnect
status
media4Kconnect
31 2
9
4
876 5

kvm-tec | 11
1. IntroductIon
Remote Extender (CON)
Nr. Name Function
10. DC Connection for 12V/2A power supply 1
11. DC Connection for 12V/2A ´power supply 2
12. Status LED Status LED for network secondary
13. Status LED Status LED for Network main
14. kvm-link Connection for bercables main
15. kvm-link Connection for bercebles secondary
16. dp in DisplayPort 1.2 Input from PC
17. USB 2.0 USB 2.0 to PC
18. Power/Status LED Display of Extender Status
usb dp kvm-link
media4Kconnect
status
media4Kconnect
1210 11 13
17 16 15 14
18
1

12 | kvm-tec
1. IntroductIon
1.5 ABOUT THE STATUS LED
The power/status LED (14/27) can light red, orange or green. Table shows the meaning of each colour.
Also see chapter 6 Troubleshooting.
Table : Meaning of LED indicators
Normal Operation
** Rem. Only
Colour Blinking Physical
Link
Active
Connection
Video
Extended
USB
Initialisation
UBS Data
Received
Identify
Command
Autoupdate
Mode
Red - Yes No No Update Failed
Red Slow No No No
Orange -Yes Yes No
Orange Fast Update in Progress
Green - Yes Yes Yes Update Succedded
Green V. fast Yes**
Red/Green V. fast Yes
Yellow -No
Yellow Slow Yes
Green - Yes
Green V. fast Yes
Main LED
Fiber Socket LEDs *

kvm-tec | 13
2. EXTENDER INSTALLATION
2.1 UNPACKING AND CHECKING THE CONTENT
Before using the product for the rst time it should be checked for damage. In case of damage
due to transport inform the carrier immediately. Before delivery the product is checked for its
function and its operating safety.
Make sure that the packaging contains the following content:
1x media4Kconnect DP1.2 /local Extender CPU
1x media4Kconnect DP1.2 /remote Extender CON
2 x 12 VDC 2 A power supply
1 x DP - DP cable 1,8 m/5,9ft
1x USB A-B cable 1,8m/5,9ft
8 x mounting feets
kvm-link 2 x 10GSFP+ installed
2

14 | kvm-tec
2. extender InstallatIon
2.2 MOUNTING KIT
2.2.1 MOUNTING (OPTIONAL)
Rack Mounting Kit RMK-F
The rack mounting kit RMK-F is for assembling kvm-tec media4Kconnect extenders. It consists
of 19“ rack tray and an alu-faceplate.

kvm-tec | 15
2. extender InstallatIon
2.3 INSTALLING THE EXTENDER
WARNING! Read and understand all safety information before installing the product.
The units can be set up to access point to point or over a Switching System with a host
computer.
In the case of the latter, an additional 10 G Network Switch and a Windows PC od tablet with
the Switching Manager must be installed With a Network Switch, each user can gain quick
access to any of the required computers.
point to point connection
Set up Switching System up to 2000 endpoints
2

16 | kvm-tec
2. EXTENDER INSTALLATION
3. USB to PC
4. DVI in from PC
1. power supply
for 12V 2A
on the back side
Please note that the recommended length of the display port cable
should be max. 1.8m,5.9 ft otherwise interference-free 4K transmis-
sion may not be guaranteed.
3. Duplex multimode fi ber cable (LC) up to 300m/984 ft

kvm-tec | 17
2. EXTENDER INSTALLATION
2
3. Duplex multimode fi ber cable (LC) up to 300m/984 ft
4. DVI to Monitor
2. USB from keyboard and mouse
1. power supply
for 12V 2A
on the backside
1. Connect the CON/Remote and the CPU/Local Unit with the supplied 12V 2A power
supply.
2. Now connect the USB cable to a USB socket of your PC and connect the other end of
the USB cable to the Local Unit. Connect the keyboard and mouse to the Remote Unit.
3. Connect the Local and the Remote Unit with a network  ber cable.
4. Connect the DP cable to the DP socket of the PC to the DP socket DP/in of the Local
device and connect the screen on the remote side with the DP cable.
HAVE FUN - Your kvm-tec Extender is now in use for many years (MTBF approx.
10 years)!

18 | kvm-tec
2. EXTENDER INSTALLATION
2.4 START UP
To start up the system:
1. Make sure that the two monitors and the computer are switched on.
2. If you are using a Network Switch, connect the power cable to an earthed wall socket.
3. Connect both extender power cables ( 6 / 20 ) to an earthed wall socket. Switch on both
units. Both extenders start an initialization process. The status LED blinks some seconds
red and changes to green after a successful connection The monitor will displays your
computer’s desktop or any open applications.
2.5 REPLACING THE SFP MODULE
The UVX1-F is delivered with a multimode SFP + module.
To replace an SFP module with a different SFP+ module:
1. Remove the black dust protector from the SFP+ module.
2. Pull the metal latch of the SFP+ module forwards until it is at a right angle.
3. Replace the SFP+ module with the other module. Put the metal latch back in position. Only
use SFP+ modules from kvm-tec, or recommended by kvm-tec.

kvm-tec | 19
2. EXTENDER INSTALLATION
2.6 REMOVING A FIBER CABLE
Toremoveabercable:
• Press the latch down and slowly pull the cable out. 2

20 | kvm-tec
3. MAIN MENU & SETTINGS
3. USING ON SCREEN MENU
Use the monitor and keyboard to access the main menu.
Access to the main menu
1. Make sure that the extenders, monitors and computer are turned on
2. Press the Scroll Lock button  ve times hintereinander. The main menu and the overview
of the submenus are displayed.
3. To access a submenu, press the corresponding key or navigate with the arrow keys up
and down to the corresponding line and then press Enter key.
SCREEN „OSD menu“
In the main menu you can make the following settings by selecting the corresponding letters:
Press
S System status menu system status/ current status
F Features Menu activated features
U Update updatermware
G Settings settings
A About this device Informationen about the unit