KWorld PE355-2T User manual

1
PCIE Dual DVB-T TV Card Pro Installation Manual
Contents
V1.0
Chapter 1 : PCIE Dual DVB-T TV Card Pro Hardware Installation.................................................................2
1.1 Package Contents ...........................................................................................................................2
1.2 System Requirements.....................................................................................................................2
1.3 Hardware Installation.....................................................................................................................2
Chapter 2 : PCIE Dual DVB-T TV Card Pro Installation..................................................................................3
2.1 The Driver Installation of PCIE Dual DVB-T TV Card Pro..........................................................3
2.2 TotalMedia Application Installation of PCIE Dual DVB-T TV Card Pro .....................................4
Chapter 3：Uninstallation of PCIE Dual DVB-T TV Card Pro........................................................................7
3.1 The Driver Uninstallation of PCIE Dual DVB-T TV Card Pro.....................................................7
3.2 TotalMedia Application Uninstallation of PCIE Dual DVB-T TV Card Pro.................................8
Chapter 4 : FAQ .................................................................................................................................................9
4.1 How to check if the driver has been installed successfully or not?................................................9
Chapter 5 :Remote Functions...........................................................................................................................10
5.1 For Windows Media Center Function..........................................................................................11
5.2 For Total Media Function.............................................................................................................12
Chapter 6 : Use the TotalMedia at the First Time............................................................................................13
Chapter 7 : TV Function in TotalMedia...........................................................................................................15
Chapter 8 : PIP (Picture-In-Picture) / PBP (Picture-By-Picture) Mode in TV Function .................................26

2
Chapter 1 : PCIE Dual DVB-T TV Card Pro Hardware Installation
1.1 Package Contents
Unpack your PCIE Dual DVB-T TV Card Pro package and make sure that all items are intact. The following
items should be included in your package:
PCIE Dual DVB-T TV Card Pro
Software Package CD
Users Manual and Quick Installation Guide
Remote Controller and USB IR Receiver
DVB-T Antenna*
Low-Profile Bracket
*The included antenna is only suitable for areas with a strong DVB-T signal. If you have reception problems, first try to
move or reorient the antenna. Otherwise, you may need to use a stronger antenna for better reception.
1.2 System Requirements
Pentium-IV 2.0GHz or above
512MB RAM of system memory or above
One available PCI-E x 1 slot
Graphics Card (Must Support Microsoft DirectX®9.0c)
Sound Card (AC97 Compatible Sound Card)
2GB Free HD Space
CD-ROM or DVD-ROM Drive (For software installation)
Microsoft DirectX®9.0c above
Microsoft Windows ® XP SP2 / XP MCE 2005 / Vista Premium above (when using MCE 2005 OS,an
extra 3rd party DVD decoder must be installed)
1.3 Hardware Installation
Please follow the steps shown below for installation of your PCIE Dual DVB-T TV Card Pro and follow the
pictorial guide below for peripheral connections.
1. Plug PCIE Dual DVB-T TV Card Pro into the available PCI-E x 1 Slot of your Main Board
2. Connect the DVB-T antenna into the TV INPUT connector.
3. Plug the USB remote receiver in your available USB 2.0 port.

3
Chapter 2 : PCIE Dual DVB-T TV Card Pro Installation
The PCIE Dual DVB-T TV Card Pro package comes with complete Windows software utilities. These
utilities can be found on the CD-ROM in this package. During installation, it is highly recommended to
disable any sub-programs. These include applications such as antivirus software and system monitoring
applications.
When you finish the hardware setup. The “Found New
Hardware Wizard” window will pop up. Please click
“Cancel”.
2.1 The Driver Installation of PCIE Dual DVB-T TV Card Pro
1. Insert the installation CD into the CD ROM device.
The AutoRun page will appear as the left image.
Please choose “Quick Installation”
2. Click “Install” to launch the installation process.

4
3. Click “start” to install the PCIE Dual DVB-T
TV Card Pro driver. Please wait, while the
installation is in process.
4. Click OK to complete the driver installation
procedure.
2.2 TotalMedia Application Installation of PCIE Dual DVB-T TV Card Pro
1. The InstallShield Wizard will guide you through
installation of TotalMedia application. Click
“Next” to continue.
2. Click “Yes” accept all the terms of the proceeding
License Agreement to install TotalMedia.

5
3. Please input user information and your
TotalMedia serial number. Click “Next” to
continue.
Note: While installing TotalMedia, it requires serial
number. The serial number is printed on the front side
of CD paper bag. Please check it from the CD bag.
4. Please choose the destination folder where you
want to install the files. You can click “Browse”
to change the destination folder. Finally click
“Next” to go to next step.
5. Setup will add program icons to the Program
Folder’s list. You may type a new folder name, or
select one from the existing folders list. Click
“Next” to start installing. Please wait while
installation in process.
.

6
6. When the message as the one on the left image,
click “Finish” to end the installation and go to
next step.
7. All necessary components have been installed.
Please click “Finish” and system will restart to
complete the installation procedure.

7
Chapter 3：Uninstallation of PCIE Dual DVB-T TV Card Pro
1. Insert the installation CD into the CD ROM device.
The AutoRun page will appear as the left image.
Please choose “Quick Uninstallation”
2. Click “Uninstall” to launch the procedure.
3.1 The Driver Uninstallation of PCIE Dual DVB-T TV Card Pro
3. Click “OK” to uninstall the PCIE Dual DVB-T TV
Card Pro driver. Please wait, while the installation
is in process.
4. Click “OK” to complete the driver uninstallation
procedure.

8
3.2 TotalMedia Application Uninstallation of PCIE Dual DVB-T TV Card Pro
5. Click the “Remove”. Follow the instruction on
screen to complete the uninstallation.
6. When the message as the one on the left image,
click “Finish” to end the uninstallation and go to
next step.
7. All necessary procedures have been completed.
Please click “Finish” and system will restart.

9
Chapter 4 : FAQ
4.1 How to check if the driver has been installed successfully or not?
Ans : Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”
window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and
game controllers” to open the device list. See Fig.1 below.
Fig.1

10
Chapter 5 :Remote Functions
PCIE Dual DVB-T TV Card Pro Remote
Controller USB IR Receiver