KWorld PVR-TV 713X User manual

1
PVR-TV 713X Installation Manual
Contents
Ver 2.0
Chapter 1 : PVR-TV 713X PCI TV Card Hardware Installation.......................................................................2
1.1 Package Contents.................................................................................................................................2
1.2 System Requirements...........................................................................................................................2
1.3 Hardware Installation...........................................................................................................................2
Chapter 2 : PVR-TV 713X Utilities And Drivers Setup....................................................................................3
Chapter 3 : PVR PLUS Software Installation....................................................................................................5
Chapter 4 : PVR PLUS Software Functions......................................................................................................7
Chapter 5 : FAQ.................................................................................................................................................8
1. How to reset the TV system? .............................................................................................................8
2. How to check if the drivers have been installed successfully or not?................................................8
3. How to check if the TV713X Remote Control can work fine?..........................................................8
Note: For multi language installation manual, please install Adobe Acrobat Reader from autorun after
inserting the CD into the CD ROM. Click “Browse” and open Installation Manual file where multi
language installation manuals are in.

2
Chapter 1 : PVR-TV 713X PCI TV Card Hardware Installation
1.1 Package Contents
Unpack your PVR-TV 713X PCI TV card package and make sure that all items are intact. The following
items should be included in your package:
TV713X PCI TV Card
Audio cable
Remote control and remote sensor
FM antenna (Optional)
PVR PLUS user manual
Installation manual
Installation CD
1.2 System Requirements
Pentium-III 800 MHz or higher (recommended)
128 MB RAM of system memory or above (recommended)
PCI 2.2 compliant slot
Graphics card (Must support DirectX 9.0)
Sound card (AC97 compatible sound card)
1GB free HD space
CD-ROM drive (For software installation)
Microsoft Windows ® 98SE/ME/2000/XP
1.3 Hardware Installation
Please follow the steps shown on the right for installation of your TV Card and follow the pictorial guide
below for peripheral connections.
1. Turn off your computer power and
any peripherals.
2. Select an available PCI slot and
remove the slot cover, screw, etc.
3. Push the TV card firmly into the slot
until it snaps in place and secure the
card by replacing the screw you
remove from step 2.
4. Place the PC lid cover back then
power on.

3
Chapter 2 : PVR-TV 713X Utilities And Drivers Setup
PVR-TV 713X PCI TV card comes with complete Windows software utilities. These utilities and drivers
can be found on the CD included in the package. During installation, it is highly recommended to disable
any sub-programs. These include applications such as antivirus software and system monitoring applications.
1. Once you finish the hardware installation, restart your
system. “Windows Found New Hardware Wizard” will
pop up. Please click “Cancel”and run the utilities setup
included in the CD.
2. Insert the installation CD into the CD ROM drive. The
auto run page will appear as the one of the left, please
select “Driver Install”.
3. The InstallShield of “Driver Install” will help you to
install all the drivers and utilities. First, it will install the
TV remote control on your system. Click “Next” to
continue.
4. Then the InstallShield of “Driver Install” will help you
install the TV card driver automatically. Click “Next” to
install PVR-TV 713X WDM drivers.

4
5. When the message as the one on the left shows, it means
that the driver has been installed successfully. Please click
“Next” to launch “TV Setup Wizard” to initialize TV
settings.
6. After installing drivers successfully, you MUST choose your
local TV system by either choosing “TV System” or “Country”.
If you select the wrong TV system, you may not be able to
watch any TV.
7. You can click the TV System directly to
choose your local TV system. If you
don’t know your local TV System, please
select “Country” to use the default
system.
8. Choose “Yes, I want to restart my computer now” and
click “Finish” to restart your computer and activate the
driver.
Note:
You can restart your computer after installing PVR PLUS
Software application.

5
Chapter 3 : PVR PLUS Software Installation
After the drivers are installed, the next step you need to do is to install “PVR PLUS”. Follow the steps below
for installation.
1. Insert the installation CD into the CD-ROM drive. The
auto run page appears as the one on the left. Click on
“PVR PLUS” to start installation.
2. The InstallShield Wizard will guide you through
installation of PVR PLUS application. Click “Next” to
continue.
3. Please choose the destination folder where you want to
install the files. You can click “Browse” to change the
destination folder.
4. Setup will add program icons to the Program Folder’s list.
You may type a new folder name, or select one from the
existing folders list. Click “Next” to start installing. Please
wait while installation in process.

6
5. When the message as the one on the left pops up, click
“Finish” to end the installation.

7
Chapter 4 : PVR PLUS Software Functions
When using PVR PLUS, There are four different functions to choose from. Picture below is an example of
how the interface looks like and a short description of each function.
•TVR : TVR turns your PC into a
full-featured video recorder.
•MPEG Encoder : MPEG Encoder
converts AVI files into MPEG format.
•Video Editor : Video Editor makes
editing MPEG video files easy.
•Burn DVD : Burn DVD creates VCD,
SVCD and DVD that can be played on a PC or
DVD player.
Note: For more detailed descriptions, please refer to PVR PLUS user manual.

8
Chapter 5 : FAQ
1. How to reset the TV system?
Ans : To re-set the TV system again, follow the pictorial guide below and choose “TV713X TVSetup” to
change system settings.
Fig. 1
2. How to check if the drivers have been installed successfully or not?
Ans: Ans: Right click on “My Computer” on the desktop and choose “Properties”. Once in “Properties”
window, click on “Device Manager” in Hardware panel. Click on the plus icon of “Sound, video and
game controllers” to open the device list. The first line where it says “KWorld TV7133 WDM Video
Capture” under Sound, video and game controllers, is depending on the chipset of your hardware. If
your chipset is 7134, it’ll show TV7134 etc.
3. How to check if the TV713X Remote Control can work fine?
Ans : 1) You have to check if the “TV713X Remote Control” utility is installed or not. Please refer to Fig.1.
2) You have to check if the drivers have been installed or not. See FAQ2.
3) You can check if the “TV713X Remote Control” tray icon is loaded
in the right-bottom of task bar. See Fig.2.
Fig. 2