Lake Shore FF339 User manual

Follow these instructions to assemble your Magnetic Design Table. All
the tools and hardware you need are provided. Begin by checking the
list below to make sure you can identify the components.
©2010 Lakeshore FF339
[phone] Ages 3+
www.lakeshorelearning.com Made in China
Magnetic Design Table
WARNING:
ADULT ASSEMBLY REQUIRED—This product
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpackaging and assembling this product.
What’s Included
tabletop
table legs (4)
bolts (16)
Allen wrench
Assembly Instructions
1Start by placing the tabletop face down on the floor. To avoid
scratching the table, put a towel or other soft cloth under it.
(continued on back)

2Attach the four table legs. Use the Allen wrench to attach each
leg to the tabletop with four bolts (as shown below).
That’s it! Your Magnetic Design Table is ready to use. The tabletop is
great for use with magnetic letters, numbers or other manipulatives—
and the write & wipe surface can be drawn on with dry-erase markers,
then easily wiped clean! (If any marker ink gets on the wood surface,
be sure to wipe it clean immediately.)