Lake Shore Spacesaver Mobile Art Center EE365 User manual

2
3. Set the side panel next to a wall to hold it in place. Then, fit each
wire drying rack into a groove, making sure the racks face the
direction shown.
(shortwires should cross
on top of long wires)
2. Position the base so that the holes are aligned with the pegs, and
push the pieces firmly together. (The grooves on the side piece and
the smooth surface of the base should both be facing in.) Use the
Allen wrench and 2 long screws to secure the side piece to the base.
(smooth surface)
(grooves)
Spacesaver Mobile
Art Center
Your new art center includes an easel, drying racks, and write & wipe
boards all in one compact, rolling unit! It’s easy to assemble, following
the directions in this guide. We’ve provided all the hardware and tools
you’ll need. Note: You can assemble the art center by yourself, but
the task will go more quickly with a helper.
What’s Included
•Hinged easel top • 2 side pieces with locking casters
• 6 wire drying racks • Base • 2 paint trays
•8wooden pegs • 8 long screws • 8 short screws
•Allen wrench • 4 clips
Assembly
©2006 Lakeshore EE365
[phone] Ages 3+
www.lakeshorelearning.com Printed in Thailand
This product contains hardware that, before
assembly, can pose a choking hazard to children
under the age of 3 years. Care should be taken
when unpacking and assembling this product.
Adult assembly required.
1. Insert 2 pegs into
aside piece as
shown at right.

2
3. Set the side panel next to a wall to hold it in place. Then, fit each
wire drying rack into a groove, making sure the racks face the
direction shown.
(shortwires should cross
on top of long wires)
2. Position the base so that the holes are aligned with the pegs, and
push the pieces firmly together. (The grooves on the side piece and
the smooth surface of the base should both be facing in.) Use the
Allen wrench and 2 long screws to secure the side piece to the base.
(smooth surface)
(grooves)
Spacesaver Mobile
Art Center
Your new art center includes an easel, drying racks, and write & wipe
boards all in one compact, rolling unit! It’s easy to assemble, following
the directions in this guide. We’ve provided all the hardware and tools
you’ll need. Note: You can assemble the art center by yourself, but
the task will go more quickly with a helper.
What’s Included
•Hinged easel top • 2 side pieces with locking casters
• 6 wire drying racks • Base • 2 paint trays
•8wooden pegs • 8 long screws • 8 short screws
•Allen wrench • 4 clips
Assembly
©2006 Lakeshore EE365
[phone] Ages 3+
www.lakeshorelearning.com Printed in Thailand
This product contains hardware that, before
assembly, can pose a choking hazard to children
under the age of 3 years. Care should be taken
when unpacking and assembling this product.
Adult assembly required.
1. Insert 2 pegs into
aside piece as
shown at right.

6. Stand the center upright. Use 2 short screws to attach each paint
tray. Tighten with the Allen wrench.
7. Attach the clips to the top of the easel. Now your Spacesaver
Mobile Art Center is ready for your classroom!
Notes:
•Be sureto lock the casters beforechildren use the easel.
•Use a mild liquid soap and water to prepare the write & wipe surfaces
for use and for routine cleanings.
3
5. Insert 4 pegs into the edges of the easel top. Align the pegs with
the holes in the side pieces and push the pieces together. Secure
with 4 long screws.
4. Insert 2 pegs into the baseboard. Position the remaining side piece
so that the holes align with the pegs and the wire racks align with
the grooves. Carefully push the side piece into place, adjusting the
shelves to fit into the grooves as needed. Fasten with 2 long
screws, using the Allen wrench to tighten the screws securely.

6. Stand the center upright. Use 2 short screws to attach each paint
tray. Tighten with the Allen wrench.
7. Attach the clips to the top of the easel. Now your Spacesaver
Mobile Art Center is ready for your classroom!
Notes:
•Be sureto lock the casters beforechildren use the easel.
•Use a mild liquid soap and water to prepare the write & wipe surfaces
for use and for routine cleanings.
3
5. Insert 4 pegs into the edges of the easel top. Align the pegs with
the holes in the side pieces and push the pieces together. Secure
with 4 long screws.
4. Insert 2 pegs into the baseboard. Position the remaining side piece
so that the holes align with the pegs and the wire racks align with
the grooves. Carefully push the side piece into place, adjusting the
shelves to fit into the grooves as needed. Fasten with 2 long
screws, using the Allen wrench to tighten the screws securely.