Lake Shore RR326 User manual

4. Slide a furniture bolt through
each predrilled hole in the
tabletop pocket.
5. Hold one of the furniture bolts
in place with one hand. Using a
standard screwdriver, slowly
rotate the barrel nut until the
furniture bolt slides into place.
Now, using a Phillips screwdriver,
tighten the furniturebolt. Repeat
for the other furniturebolt.
6. Repeat Steps 2 through 5 with
the remaining legs.
These products are not made by, authorized by or associated with the LEGO group.
LEGO and DUPLO are registered trademarks owned by KIRKBI AG.
→
→
→
→
Fun with LEGO®/DUPLO
Activity Table
Your new activity table is designed to work with both LEGO and DUPLO
pieces. It also has convenient storage pockets built right into the tabletop,
allowing easy access to the pieces…and making cleanup a breeze!
What’s Included
• LEGO/DUPLO tabletop • 4 hardwood legs • 8 wooden dowels
• 8 furniture bolts • 8 barrel nuts
Note: To attach the legs to the tabletop, you will need a Phillips
screwdriver and a standard screwdriver.
Assembly Instructions
1. Set the tabletop on its side.
2. Insert two wooden dowels and
two barrel nuts into one of the
legs, as shown. Note: Make sure
the slotted ends of the barrel nuts
are facing out.
3. Align the wooden dowels with
the holes on the bottom of the
table and press the leg into the
tabletop. Note: Make sure the
holes for the barrel nuts face in,
as shown.
©2001 Lakeshore RR326
[phone]
www.lakeshorelearning.com Printed in Thailand
(continued on back)
→
→
→
→
→
→
→
→
→
→
→
→

4. Slide a furniture bolt through
each predrilled hole in the
tabletop pocket.
5. Hold one of the furniture bolts
in place with one hand. Using a
standard screwdriver, slowly
rotate the barrel nut until the
furniture bolt slides into place.
Now, using a Phillips screwdriver,
tighten the furniturebolt. Repeat
for the other furniturebolt.
6. Repeat Steps 2 through 5 with
the remaining legs.
These products are not made by, authorized by or associated with the LEGO group.
LEGO and DUPLO are registered trademarks owned by KIRKBI AG.
→
→
→
→
Fun with LEGO®/DUPLO
Activity Table
Your new activity table is designed to work with both LEGO and DUPLO
pieces. It also has convenient storage pockets built right into the tabletop,
allowing easy access to the pieces…and making cleanup a breeze!
What’s Included
• LEGO/DUPLO tabletop • 4 hardwood legs • 8 wooden dowels
• 8 furniture bolts • 8 barrel nuts
Note: To attach the legs to the tabletop, you will need a Phillips
screwdriver and a standard screwdriver.
Assembly Instructions
1. Set the tabletop on its side.
2. Insert two wooden dowels and
two barrel nuts into one of the
legs, as shown. Note: Make sure
the slotted ends of the barrel nuts
are facing out.
3. Align the wooden dowels with
the holes on the bottom of the
table and press the leg into the
tabletop. Note: Make sure the
holes for the barrel nuts face in,
as shown.
©2001 Lakeshore RR326
[phone]
www.lakeshorelearning.com Printed in Thailand
(continued on back)
→
→
→
→
→
→
→
→
→
→
→
→