Lake Shore HH128 User manual

Hold everything you need in one convenient place with the Outdoor Classroom Cart! The cart comes complete
with shelves, storage baskets and a protective cover. Plus, the whole cart is on sturdy casters for super-easy
movement from place to place!
What’s Included
Assembly Instructions
(continued on back)
©2010 Lakeshore HH128
[phone]
www.lakeshorelearning.com Made in China
side panels (2) shelves (3)
locking casters (2)
Allen wrench
bolts (24)
caster wrench
WARNING:
ADULT ASSEMBLY REQUIRED—This product
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpackaging and assembling this product.
WARNING:
ADULT ASSEMBLY REQUIRED—
This product contains hardware that, before assembly,
can pose a choking hazard to children under the age of
3 years. Care should be taken when unpackaging and
assembling this product.
WARNING:
ADULT ASSEMBLY REQUIRED—This product
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpackaging and assembling this product.
WARNING:
ADULT ASSEMBLY REQUIRED—This product
contains hardware that, before assembly, can pose a choking
hazard to children under the age of 3 years. Care should be
taken when unpackaging and assembling this product.
WARNING:
ADULT ASSEMBLY REQUIRED—This product
contains hardware that, before assembly, can pose a choking hazard
to children under the age of 3 years. Care should be taken when
unpackaging and assembling this product.
April 9, 2008
Use the Allen wrench to attach the bottom
shelf to the right side panel. Make sure that
the dimpled side of the panel is facing in.
(See inset below.)
12Lay the unit on its side, and then use the Allen
wrench to attach the two upper shelves to the
right side panel.
free-rolling
casters (2)
Also includes
• 4 small baskets
• 3 medium baskets
• 2 large baskets
• Cover

Use the caster wrench to attach the casters
as shown. The locking casters should be
placed at opposite corners of the unit.
The cart comes with a durable cover that resists
sunlight, weather and scratching. Slide the cover
over the cart and fasten the hook & loop tab to
secure it in place.
To lock the cover to the cart:
Select a padlock with a U-bar that fits through
the grommets on the cover. Slide the U-bar
through one of the grommets and part of the
cart. Close the padlock to lock the cover in
place.
To lock the cover and cart to a fixed object:
1. Select a bike lock or cable lock that fits
through the grommets on the cover. (Or, use
a padlock with a chain or cable.)
2. Pass the free end of the cable or lock through
part of the cart. Then, pass it through or
around a fence or other fixed object.
3. Finally, pass the free end through a grommet
on the cover. Close the lock to secure the
cover and the cart.
To clean the cover:
Hand-wash in cold water using mild soap.
Line dry.
Stand the unit upright, and then lock the locking
casters in place. Finally, place the baskets into
the cart as shown. Your cart is ready to use!
Next, use the Allen wrench to attach the three
shelves to the left side panel.
3
5 6
4