Land Pride RCR2596 Series User manual

70
Rotary Cutters, Single Deck
312-753S
Specifications & Capacities
Designs, specifications, features and information are subject to change without notice.
4/23/07 312-753S
RCR2596, RCR2510 & RCRM2510 Series
RCR2596 (540 RPM) RCR2510 (540 RPM) RCRM2510 (1000 RPM)
Hitch Lift-Type Category 1 & 2
Quick hitch adaptable
Pull-Type - w/Dual Level Rods
Lift-Type Category 2 & 3
Quick-Hitch adaptable
Pull-Type - w/Dual Level Rods
Working Width 94” 118”
Overall Width 100” 123.5”
Overall Length Lift-Type: 105”
Pull-Type: 135” Lift-Type: 110” Pull-Type: 145”
Cutter Weight
(Without Chain or Rubber Shields)) Lift-Type 1068 lbs. Lift-Type 1400 lbs.
Blade Tip Speed 540 RPM 14,592 fpm 540 RPM 17,749 fpm
1000 RPM 18,035 fpm
Deck Material Thickness 10 gauge
Gearbox Oil Type 80-90W EP
Gearbox Rating H.P. Center - 100 HP Outboard 60 HP
H.P. Rating (PTO) Lift-Type: 45 - 110
Pull-Type: 30 - 110 Lift-Type: 50 - 110 Pull-Type: 35 - 110
Cutting Height 2” - 12”
Cutting Capacity 1”
Optional Safety Shields Front & Rear Chain/ Front & Rear Rubber
Skids Replaceable
Deck Height 9 5/8”
Blades 1/2” x 4" Heat Treated
Free-Swinging Suction Blades
Stump Jumper Round Pan 3/16”
Driveline Cat 4, w/Equal Angle U-Joint Cat 4 w/Equal Angle U-Joint or
Constant Velocity U-Joint
Driveline Safety Protection 540 rpm - 4 plate slip clutch
1000 rpm - 2 plate slip clutch
Gearbox (Speed up beveled gears) 540 rpm or 1000 rpm PTO Driven Gearbox
Cast Iron Housing, Beveled Gears
Tailwheel Lift-Type: 2 ea. 4” x 8” x 15 1/4” Laminated
Pull-Type: 2 ea. 6” x 9” x 21” Laminated or 24” Aircraft tires or 15” Automotive Rims