LAZBOY 49061S-A User manual

Guest Chair
Assembly Instructions
Model 49061S-A / 49061S-B
275 lbs
Designed to be comfortable,
andbuilt to stay that way.

2
PARTS
Allen Key
E
D
A1 A2
Seat Cushion
B
Back Cushion
C
Right Wood Frame Left Wood Frame
1” Screws
Quantity: 1
Quantity: 1 Quantity: 12 Quantity: 1
Quantity: 1
Quantity:1
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are securely tightened.
3. Save the hexagonal wrench. Check that all bolts, screws and knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
6. To clean the product, use only a clean cloth. The use of chemicals or cleaning products may affect the color
fastness.
7. Use this chair for its intended purpose only.

3
Step 1
Place the seat cushion (B) on top of a box prior to assembly. Align
two wood frames (A1 & A2) over predilled holes on the underside of
seat cushion (B). Fasten two frames to the bottom of seat cushion (B)
(with the front of the metal brackets facing the front of seat cushion)
by using 1” screws (D). Do not tighten screws completely.
A1 A2
A2
E
Step 2
Attach back cushion (C) to the wood frames (A1 & A2) by using 1”
screws (D). Do not tighten screws completely. Adjust the chair so the
seat and back cushions are aligned and the frame is sitting flat on the
floor. Tighten all the screws. Pull down the back flap tightly and attach
the back flap to the velcro on the bottom of the seat cushion (B).
D
ED
C
D
D
B
A1
B

Limited Warranty
YEAR
LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to LF Products Pte Ltd.