LAZBOY 50106S User manual

Guest Chair
Assembly Instructions
Model 50106S
300 lbs
Designed to be comfortable,
andbuilt to stay that way.

2
PARTS
Allen Key
E
D
A1 A2
Seat Cushion
B
Back Cushion
C
Right Metal Frame Left Metal Frame
1” Screws
Quantity: 1
Quantity: 1 Quantity: 12 Quantity: 1
Quantity: 1
Quantity:1
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are securely tightened.
3. Save the hexagonal wrench. Check that all bolts, screws and knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
6. To clean the product, use only a clean cloth. The use of chemicals or cleaning products may affect the color
fastness.
7. Use this chair for its intended purpose only.

3
Step 1
Place the seat cushion (B) on top of a box prior to
assembly. Align two metal frames (A1 & A2) over
predilled holes on the underside of seat cushion (B).
Fasten two frames to the bottom of seat cushion (B) (with
the front of the metal brackets facing the front of seat
cushion) by using 1” screws (D). Do not tighten screws
completely.
Step 2
Attach back cushion (C) to the metal frames (A1 & A2)
by using 1” screws (D). Do not tighten screws
completely. Adjust the chair so the seat and back
cushions are aligned and the frame is sitting at on the
oor. Tighten all the screws. Pull down the back ap
tightly and attach the back ap to the velcro on the
bottom of the seat cushion (B).
A1
A2
B
D
D
D
D
E
C
B
A1
A2
E
D
D

LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to LF Products Pte Ltd.