LAZBOY 50850-SSL User manual

Mesh Chair
Assembly Instructions
Model 50850-SSL / 50850-SBC
275 lbs
Designed to be comfortable,
andbuilt to stay that way.

2
WARNINGS
1. This product should be used by only one person at a time.
2. Do not use this chair unless all bolts, screws and knobs are securely tightened.
3. Save the hexagonal wrench. Check that all bolts, screws and knobs are tight every three months or as needed.
4. Dispose of packing material properly. Do not use the plastic cover as a head covering. It may cause suffocation.
5. Do not use the chair as a stepladder.
6. To clean the product, use only a clean cloth. The use of chemicals or cleaning products may affect the color
fastness.
7. Use this chair for its intended purpose only.
8. The casters sold with this chair are intended for use on carpet. They are not recommended for use on tile or
hard-wood oors. Using these casters on tile or wood ooring may cause damage to the oor surface. Please
consider using a chair mat to protect your oor surfaces.
LA-Z-BOY is a trademark of La-Z-Boy Incorporated and is used under license to LF Products Pte Ltd.

3
PARTS
D
C
B
A
FG
K
Allen Key
Quantity: 1
Casters
Quantity: 5 Star Base Quantity:1Gas Lift Quantity: 1 Seat Plate Quantity: 1
SeatCushion
Quantity:1
H
40mm Small Screws with
Flat Washers
Quantity: 6
Quantity:1 Quantity:1
Back Cushion
Quantity: 1
E1 E2
Left Arm Right Arm
I
35mm Small Screws with
Flat Washers
Quantity: 4
J
25mm Big Screws with Spring Washers
and Flat Washer
Quantity: 3

4
Step 1
Place the star base (B) upside down and insert 5 casters (A)
into the holes on the star base (B).
Step 2
Turn the star base (B) over and insert the gas lift (C) through the
center hole on top of star base (B).
A
B
C
B

5
E1
E2
F
K
H
H
K
F
D
I
Step 3
Tighten the brackets of arms (E1 & E2) onto the bottom of the
seat cushion (F) (with front of arms facing the front of seat
cushion) by using 40mm small screws with at washers (H).
Note: Tighten the screws completely.
Step 4
Attach seat plate (D) to the bottom of the seat cushion (F)
(with the front of the seat plate facing the front of seat
cushion). Attach by using 35mm small screws with at
washers (I) for the holes of the seat plate (D) and tighten
screws.
Note: Tighten the screws completely.

6
C
D
F
K
G
D
J
Step 5
Insert back cushion (G) into the rear hole of the seat
plate (D) as shown. Then secure with 25mm big screws
with spring washers and at washers (J).
Note: Tighten the screws completely.
Step 6
Position the assembled chair upright with the seat plate facing
down. Insert the gas lift (C) into the center hole of the seat
plate (D).

7
Operating Instructions
Function Instruction - 1
To Adjust Seat Height:
While seated, lean forward and reach under the right side of
the chair to nd the handle. Lift the handle and raise your body
up slightly to allow the chair to rise to the desired height. Once
desired height is reached, release handle to lock chair at
desired height. To lower the seat, lift the handle while seated.
The chair will descend until the handle is released or the chair
reaches the bottom position.
Function Instruction - 2
To Operate Tilt Lockout:
While seated, reach under the left side of the chair to nd
the handle. Pull up the handle and lean back to allow the
chair to tilt backwards. Push the handle to the down position
to lock the chair angle while the desired position is reached.
Once you want to release the mechanism from the lock
position, pull the handle upward (If pull the handle upward,
apply more weight backward onto the back rest cushion and
then release, the back rest cushion will come back to normal
position.)
Note: The force of the backrest can adjust automatically to
the individual weight.

8
Function Instruction - 3
To Adjust Seat Depth:
Reach under the left side of the chair to nd the handle.
Lift the handle and adjust the seat depth short enough to
enable your legs to move freely under the chair. To adjust
seat depth, lift the handle and slide the seat into the
preferred position. Located desired position and release
handle to lock.
Function Instruction - 4
To Adjust Arm Height:
Pull up the buttons on the side of the chair arms to allow
the arms to adjust up or down freely, then release the
buttons once desired height is reached.

9
Function Instruction - 5
To Adjust Armrests Forward and Backward:
While seated, grasp the armrests and push them forward
or backward to a desired position.
Function Instruction - 6
To Adjust Armrests Angle:
While seated, grasp front end of armrests and pivot them
to the left or right. Adjusting arm angle can help support
different types of work and shifts in posture.

10
Function Instruction - 8
360˚ Swivel:
360˚ seat swivel.
Function Instruction - 7
To Adjust Lumber Support Height:
Lumber support height adjust independently for the short
and tall.