LAZBOY Sears Charlotte Chaise Lounge User manual

Page 1 of 7
OWNER’S MANUAL
Sears Charlotte Chaise Lounge
Product Code: D71 M25156
UPC Code: 7-22938-10449-9
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
1 866-391-4868
8am-5pm (EST), Monday-Thursday
8am-4pm (EST), Friday.
View the expanded assortment of outdoor living product on-line at
www.sears.com
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc.
© 2014 La-Z-Boy Incorporated.

Page 2 of 7
WARRANTY
THIS IS A RESIDENTIAL WARRANTY AND DOES NOT APPLY FOR COMMERICAIL
USE.
In order to activate your warranty please register at www.bjifurniture.com. There you
can review our full warranty details and other helpful information. Or, you may call us
at 1 866-391-4868, 8am - 5pm (EST), Monday – Thursday, 8am – 4pm(EST), Friday.
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze
damage in cold climates. Wash all frames with a solution of mild soap and water. Rinse with
clean water and dry with a soft absorbent cloth towel. Frames can be treated with a liquid
wax for maximum protection against UV rays and/or salty damp air. If your set includes
cushions, slings, and/or an umbrella they may be cleaned by hand with a solution of soap
and water with a clean water rinse. (Never machine wash cushions, slings or umbrella
covers as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home
dryer to tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all the instructions before assembly.
Failure to do so may result in faulty assembly and potential injury!
Assemble the item on a soft, non-abrasive surface such as a carpet or cardboard to avoid
damaging the item. Seek assistance to assemble bulky or heavy items.
After final alignment, make sure all bolts, nuts and nut covers are securely tightened.
PARTS LIST
PART
#
DESCRIPTION PICTURE Q’TY
A1 Left Arm
1

Page 3 of 7
A2 Right Arm
1
B Seat Frame
1
C Back Shield
1
D Back Frame
1
E Seat Cushion
1
F Back Cushion
1
G Toss Pillow
1
H1 M6x40mm Hex Head
Bolt
6
H2 M6x15mm Hex Head
Bolt
6

Page 4 of 7
H3 M6x30mm Hex Head
Bolt
2
I M6 Washer 14
J M6 Bolt Cap 14
K Plastic Washer
2
L Hex Wrench
2

Page 5 of 7
Assembly Steps:
Step1:
Repeat procedure for other side. NOTE: DO NOT tighten the bolts completely at this step.
Part
#
A1 x1 Part# B x 1 Part
#
A2 x1 Part# J x 8
Part# H1 x 6 Part# H2 x 2 Part# I x 8

Page 6 of 7
Step2:
Repeat procedure for other side. NOTE: DO NOT tighten the bolts completely at this step.
Step3:
NOTE: Once all the bolts are in place tighten completely.
Part# C x 1 P
a
r
t#
H2 x 4 Part
#
J
x 4 Part# I x 4
Part# D x 1 Part# H3 x 2 Part# J x 2 Part# I x 2 Part# K x 2

Page 7 of 7
Step4:
Now the chaise is ready for your enjoyment.
Part# E x 1 Part# F x 1 Part# G x 1