LAZBOY Kmart Brynn Recliner User manual

Page 1 of 5
OWNER’S MANUAL
Kmart Brynn Recliner
Product Code: 880-04667310-9
UPC Code: 7-22938-09175-1
Date of Purchase: __ / __ / __
If you have any problems with this product, DO NOT RETURN TO THE STORE.
CALL OUR CUSTOMER SERVICE HOT-LINE AT
1 866-851-2393
8am-5pm (EST), Monday-Thursday
8am-4pm (EST), Friday.
View the expanded assortment of outdoor living product on-line at
www.lazboyoutdoor.com and www.kmart.com
.
La-Z-Boy® is a registered trademark of La-Z-Boy Incorporated and is used under license to BJI, Inc.
© 2013 La-Z-Boy Incorporated.

Page 2 of 5
WARRANTY
In order to activate your warranty please register at www.bjifurniture.com. There you can review our full warranty details
and other helpful information. Or, you may call us at 1 866-851-2393, 8am - 5pm (EST), Monday – Thursday, 8am –
4pm(EST), Friday.
Care and Maintenance
Be careful to never allow water to build up in frames as this will cause corrosion and freeze damage in cold climates. Wash all
frames with a solution of mild soap and water. Rinse with clean water and dry with a soft absorbent cloth towel. Frames can be
treated with a liquid wax for maximum protection against UV rays and/or salty damp air. If your set includes cushions, slings, and/or
an umbrella they may be cleaned by hand with a solution of soap and water with a clean water rinse. (Never machine wash cushions,
slings or umbrella covers as this will result in shrinkage or damage).
After cleaning cushions tip on end and allow to drip dry. (Never use a commercial or home dryer to tumble dry fabric goods).
Do not use bleach or solvents to clean any product! This will void the warranty.
Lack of original receipt will void warranty!
CAUTION: Read all instructions before assembly. Failure to do so may
result in faulty assembly and potential injury!
SPECIAL WARNINGS
In order to avoid damaging the item, please assemble the item on a soft,
non-abrasive surface, such as a carpet or cardboard. When assembling bulky or
heavy items, work with an assistant. After final alignment, verify that all bolts,
nuts, and nut covers are securely tightened.
Note: Identify all parts packed in the carton against the Parts List. Remove
all of the protective material carefully, and DO NOT use a knife in order to
avoid scratching the furniture. Do not tighten the bolts until the product is
completely assembled.

Page 3 of 5
Important Safety Instructions:
Important: Read these instructions thoroughly before using
WARNING
• Closely supervise children and disabled persons using this product.
• Sit down in the unit slowly. To avoid tip over, do not throw your weight against the back of the unit.
Move the unit into or out of the reclining position slowly, making sure that no children or pets are in
close proximity.
• This product has many moving parts, serious injury can occur if not used properly. Keep hands,
fingers and body parts away from the mechanism. To reduce the risk of head entrapment and other
injuries, keep children and pets away from openings and moving parts in and around furniture.
• Only the occupant should operate the unit. Never attempt to open the leg rest by pulling on it.
• Do not stand, sit or place extra weight on the arms, back or open leg rest.
• To safely exit the unit and prevent a tripping hazard bring the back upright and close the leg rest.
• Do not use this product if it is damaged. Do not use attachments or substitute parts.
• Provide a clear path for operation of the back and leg rest. Place tables and area rugs at a
distance to allow the leg rest to fully extend without rubbing or interference.
• This product is not intended for use as a health care device.
• Do not operate the unit until the back is installed and locked.
• Use care when moving the product. Before lifting the product, secure the mechanism to prevent
unexpected opening or movement. Never move the product by the mechanism, leg rest or reclining
back. Disconnect modular units. Securely grip non-moving parts only.
• Keep hands away from the internal frame parts. (Figure 1 and Figure 2).
Figure1 Figure2

Page 4 of 5
PARTS LIST
The assembly instructions below are for chair back.
1.
NOTE: Lower the back (B) onto the body (A), making sure the locking brackets on the back (B) and body (A) are
completely engaged. To make sure the back (B) is installed correctly stand behind the chair and pull up on the
back frame (B). If one or both sides move out of position, the brackets are not locked. Remove the back (B) and
repeat the steps.
Item Part Name Picture Qty
A Seat frame 1
B Back frame 1
C Seat cushion 1
D Back cushion 1
E Toss pillow 1
Item Picture Qty
A
1
B 1

Page 5 of 5
2.
Item Picture Qty
C 1
D 1
E 1
Figure 3 (the closed position) Figure 4 (the 1st position)
Figure 5 (the 2nd position)
1. The recliner chair is equipped with a two-position locking leg rest for
customized seating comfort. Simply push on the back and armrest to extend
the recliner mechanism. You may stop in any one of two positions. The
closed position (Figure 3). The 1st position is slightly inclined (Figure 4). The
2nd position is slightly more inclined (Figure 5).
2. Bring the back upright by closing the leg rest before getting out of the unit.