LeapFrog leapland Adventures User manual

Instruction Manual
This guide contains important information. Please keep it for future reference.
91-003970-000 US

2
INTRODUCTION
Thank you for purchasing the LeapLand Adventures™ learning video
game! Hunt for the four missing keys to unlock Clever Castle and learn
about letters, shapes, numbers and colors along the way.
INCLUDED IN THE PACKAGE
• 1 wireless controller
• 1 HDMI game stick
• 1 micro USB power cable
• Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties and packaging screws are not part of this
toy and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de conserver ce guide des parents car il comporte des
informations importantes.
D-Pad
B Button
A Button
Home Button Help Button
HDMI Game Stick
Micro USB
Power Cable

3
Unlock the Packaging Locks
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
GETTING STARTED
INITIAL SETUP
1. Plug the USB B Connector end of the Micro USB
Power Cable into the USB B port on the HDMI
Game Stick.
2. Plug the HDMI Game Stick into an HDMI port on
your television.
3. Plug the USB A Connector end of the Micro USB
Power Cable into a USB port on your television
or other qualified DC 5V adapter with output no
less than 500mA.
BATTERY REMOVAL AND INSTALLATION
1. Find the battery cover located on the back of the
Wireless Controller, use a coin or screwdriver to
loosen the screw and then open the battery cover.
2. Remove old batteries by pulling up on one end
of each battery.
3. Install 2 new AA (AM-3/LR6) batteries following
the diagram inside the battery box.
4. Replace the battery cover and tighten the screw
to secure.

4
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under
adult supervision.
• Do not charge non-rechargeable batteries.
NOTE
If the Wireless Controller powers down or if the light fades out during
play, please install a new set of batteries.
PRODUCT FEATURES
1. D-Pad
Press the D-Pad on the Wireless Controller to select an item on the
Menu screen. While playing the game, press the D-Pad left and right
to move the character around the screen. Press down on the D-Pad
to make the character crouch and press left or right on the D-Pad
to make the character walk while crouching.

5
2. Home Button
Press the Home Button on the Wireless Controller to quit a level,
quit the game, or return to the previous Menu screen.
3. Help Button
Press the Help Button on the Wireless Controller to hear hints and
tips on how to play the game or navigate the Menu screen.
4. A Button
• Press the A Button on the Wireless Controller to select the
highlighted objects on the Menu screen.
• Press the A Button to make the character jump.
• Press the A Button a second time while the character is in the air
to make the character double-jump.
• Press the A Button repeatedly to get the character out of a
bubble trap.
• When two treasure chests appear on the screen, press the A Button
to select the treasure chest on the left.
5. B Button
• Press the B Button on the Wireless Controller to return to the
previous Menu screen, or to change the playable character while
on the Map Menu screen.
• If a B Button icon appears above a Curricular Character’s head,
press the B Button to interact with that character.
• When two treasure chests appear on the screen, press the B Button
to select the treasure chest on the right.
6. Menu Screens
The following Menu screens appear in the game.
Save Selection Screen
• Create or delete a saved profile on
the Save Selection screen.
• To recover a saved file that has been
accidentally deleted, highlight a New
save slot and press the following
buttons on the Wireless Controller:
Home + Home + Help + Help + B + B
+ Help + Home + B. This will recover
the deleted file.
• To unlock all the castle rewards in the

6
game, highlight an existing saved profile and press the following
buttons on the Wireless Controller: Home + Home + Help + Help +
B + B + Help + Home + B.
Map Menu Screen
• Access the different areas of the
game from the Map Menu screen.
• The player will need to find at least
one key before the castle area can
be accessed.
• To change the playable character,
press the B Button.
• To exit the game, press the Home Button.
• View castle rewards on the Map Menu
screen after every Gem Festival.
Learning Center
• Access the learning curriculum
content from the Learning Center.
Level Select Screen
• Use the arrow buttons on the D-Pad
to highlight an unlocked level.
• Press the A Button to select a
highlighted level.
• Levels can only be unlocked once a
previous level has been successfully
completed.
7. In-Game Items
The following in-game items appear throughout the game.
Gems
• Players can collect Gems in every level.
• Players can also find Gems in treasure chests.
• When all of the levels in an area are completed, stars are rewarded
to the player for the total number of Gems that they have collected.
• The game can be completed multiple times using a saved profile.
• Each completion will present the player with different Gems
to collect.
Cleverberries
• Players can collect Cleverberries in every level.
• Players can also find Cleverberries in treasure chests.
• Cleverberries give the playable character one heart of health.

7
8. In-Game Obstacles
The following are some of the in-game obstacles that players will
encounter. These in-game obstacles remove one heart of health if
the playable character touches them.
9. In-Game Characters
The following are some of the in-game characters that players will
interact with.
Thorns
Flytrap
Spiked Flower
Cactus
Spiked Cactus
Electric Box
Large Floating Bubble
Wooden Log
Garbage Can
Thorned Tumbleweed
Fire Plant Projectiles

8
Curricular Characters
• The Curricular Characters teach fun facts about themselves.
• The Letter Curricular Characters can be found in the Letterland
area of the Map Menu screen, or in the Learning Center.
• The Number Curricular Characters can be found in the Numberville
area of the Map Menu screen, or in the Learning Center.
• The Shape Curricular Characters can be found in the Shapetown
area of the Map Menu screen, or in the Learning Center.
• The Color Curricular Characters can be found in the Color Springs
area of the Map Menu screen, or in the Learning Center.
Pixies
• The Pixies are silly and mischievous, and they do their best to
prevent the player from finding the keys to Clever Castle.
• Some of the Pixies will remove one heart of health if the playable
character touches them.
• The Pixies appear in many different shapes and colors; some fly,
some swim, and some pop up from underground.
10. Automatic Shut-Off
To preserve battery life, the Wireless Controller will automatically
go into sleep mode after approximately 1 minute without input. The
unit can be turned on again by pressing the D-Pad, Home Button,
A Button or B Button.
11. Screen Saver Mode
LeapLand Adventures™ will automatically save and quit the current
game, then go into Screen Saver mode after approximately 20
minutes without input. To exit Screen Saver mode, press the D-Pad,
Home Button, A Button or B Button on the Wireless Controller.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.

9
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
5. Always keep the Wireless Controller and HDMI Game Stick away
from water.
6. Examine the Micro USB Power Cable regularly, checking for damage
to the cable, plug and other parts. Do not use the Micro USB Power
Cable if there is any damage.
TROUBLESHOOTING
If you are unable to insert the HDMI Game Stick directly into the HDMI
port on your television due to clearance issues, a third party HDMI
extension cable may be a good solution. A short HDMI extension cable
as shown below can be purchased from major electronics retailers.
If for some reason the unit stops working or malfunctions, please follow
these steps:
HDMI Game Stick
1. Interrupt the power supply by unplugging the USB A Connector end
of the Micro USB Power Cable from the USB port on your television
or other qualified DC 5V adapter with output no less than 500mA.
2. Unplug the HDMI Game Stick from the HDMI port on your television.
3. Wait for 10 Seconds, then plug the HDMI Game Stick into the HDMI
port on your television.
4. Plug the USB A Connector end of the Micro USB Power Cable into
the USB port on your television or other qualified DC 5V adapter
with output no less than 500mA. The unit will now be ready to
play again.
Wireless Controller
1. Interrupt the power supply by removing the batteries.
2. Let the unit stand for 10 seconds, then replace the batteries.
3. The unit will now be ready to play again.
4. If the unit still does not work, replace with an entire set of
new batteries.

10
OTHER NOTES
Static electricity may cause the HDMI Game Stick to malfunction. In cases
where the HDMI Game Stick is malfunctioning due to static electricity,
disconnect the Micro USB Power Cable, wait for 10 seconds, then
reconnect the Micro USB Power Cable to reboot the HDMI Game Stick.
FCC Compliance Statement
After completing the steps in the Initial Setup section, power on the
television. FCC e-labeling will be shown on the television for the U.S.
version of LeapLand Adventures™.
This screen confirms that this product complies with FCC regulations.
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[email protected]om. Creating and developing LeapFrog
products is accompanied by a responsibility that we take very
seriously. We make every effort to ensure the accuracy of the
information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact us
with any problems and/or suggestions you might have. A service
representative will be happy to help you.

11
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority
to operate the equipment.
CAN ICES-3 (B)/NMB-3(B)
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6132
Product Name: LeapLand Adventures™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500,
Emeryville, California 94608
Website: leapfrog.com
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
This device contains licence-exempt transmitter(s)/receiver(s)
that comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes :
1) L’appareil ne doit pas produire de brouillage.
2) L’appareil doit accepter tout brouillage radioélectrique subi,
même si le brouillage est susceptible d’en compromettre le
fonctionnement.

12
®
The terms HDMI, HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
91-003970-000 US
Read our complete warranty and
legal policies online at
leapfrog.com/legal
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2021 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.