LeapFrog My Peek-a-Boo LapPup Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003591-000 US
My Peek-a-Boo LapPupTM

2
INTRODUCTION
Thank you for purchasing My Peek-a-Boo LapPupTM! Flip open
this toy laptop and say hello to Scout as he introduces rhymes,
shapes, colors and numbers. Press Scout’s name tag button to
move his paws in front of his eyes and hear cute peek-a-boo
phrases. Five crayon buttons light up while playing phrases and
songs about colors. Shape buttons play rhymes about shapes,
colors and numbers. Slide the clicking mouse up and down for
additional imitative play.
Light-Up
Crayon
Buttons
Peek-a-Boo
Button
Number
and Shape
Buttons
Mouse
Musical
Space Bar
On/Off/Volume
Control Switch

3
INCLUDED IN THIS PACKAGE
• One My Peek-a-Boo LapPupTM
• One parent’s guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
Unlock the packaging locks:
Rotate the packaging locks 90
degrees counterclockwise.
Pull out the packaging locks and
discard.

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the
battery cover.
4. Install 3 new AAA (AM-4/LR03) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

6
PRODUCT FEATURES
1. On/Off/Volume Control Switch
To turn the unit ON, slide the On/Off/
Volume Control Switch to the Low
Volume ( ) or the High Volume ( )
position. To turn the unit OFF, slide the
On/Off/Volume Control Switch to the
OFF ( ) position.
2. Open & Close Play
Open and close the laptop to learn about
opposites. Scout’s mouth lights up as he
talks.
3. Peek-a-Boo Button
Play a silly game of peek-a-boo by
pressing Scout’s name tag. Scout will
cover his eyes and say cute peek-a-boo
phrases.
4. Light-Up Crayon Buttons
Pressing the Light-Up Crayon Buttons
builds motor skills and triggers phrases
and songs about colors.
5. Number and Shape Buttons
The Shape Buttons play cute rhymes
about shapes, colors and numbers.

7
6. Musical Space Bar
Pressing the green space bar plays three
learning songs about letters, shapes,
colors and numbers.
ACTIVITIES
1. Music
Press any button to hear a variety of
learning songs and music.
2. Pretend Play
Open and close the LapPup, type on the
Light-Up Crayon Buttons, and slide the
clicking Mouse up and down for pretend
play.
3. Play and Learn
Press the buttons to learn about
numbers, shapes and colors.
4. Peek-a-Boo Play
Press Scout’s name tag to play a
game of peek-a-boo! Watch as his face
disappears behind his hands and then
appears again!

8
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back ON. The unit will now be ready to
play again.
5. If the unit still does not work, replace with an entire set
of new batteries.

9
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
Supplier’s Declaration of Conformity
Trade Name: LeapFrog®
Model: 6061
Product name: My Peek-a-Boo LapPupTM
Responsible Party: LeapFrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: leapfrog.com

10
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.