LeapFrog ABCs & Activities Wooden Table User manual

Instruction Manual
This manual contains important information. Please save it for future reference.
REMOVING PRODUCT FROM PACKAGE
Use a screwdriver (not included) to remove the two packaging
screws (see pg. 6 image) located on the underside of the table.
Discard screws before giving toy to child.
ABCs & Activities Wooden Table
ABCs & Activities Wooden TableABCs & Activities Wooden Table ABCs & Activities Wooden Table
TM

2
INTRODUCTION
Thank you for purchasing the ABCs and Activities Wooden
Table™!
Explore letters, animals, music and more while sitting or
standing. For sit-down play, place the table insert Activity
Center side up to build motor skills. When crawlers become
cruisers, place the insert inside the table frame to encourage
standing and walking. When your toddler is ready, flip the insert
over and kids will explore letters, animals, music and more with
colorful, touch-sensitive pictures.
Lock
Release
Latch (on
underside of
Table Top)
Double-Sided
Table Insert
Table Top
Legs

3
Book Page
Gears
Off/Low/
High
Volume
Switch
Instruments
Touch-
Sensitive
Pictures
Shape Blocks
Bead Roller
Bead Maze
Light-Up
Center
Mode Slider
Star Icon
Light-Up
Drum
Piano Keys
Double-Sided Table Insert
Letter Center Side
Activity Center Side

4
Double-sided
table insert
Triangle block
Table top
Circle block Square block
4 legs
INCLUDED IN THE PACKAGE
• Quick Start Guide

5
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your
child’s safety.
NOTE
Please save this Instruction Manual as it contains important
information.
NOTE
Please ask us about the availability of FSC Products.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’instructions car il
comporte des informations importantes.
NOTE
Merci de nous consulter pour connaître la disponibilité des
produits FSC.

6
REMOVE AND DISCARD PACKAGING SCREWS BEFORE USE
Please use a screwdriver to remove the two screws located on
the underside of the table. Screws are packing materials and
should be discarded for your child’s safety.
Retirer et jeter les vis d’emballage avant utilisation
Veuillez utiliser un tournevis pour retirer les deux vis au
bas de la table. Les vis sont des matériaux d’emballage qui
doivent être jetés pour la sécurité de l’enfant.

ASSEMBLY
With the ABCs & Activities Wooden Table™, safety comes
first. To ensure your child’s safety, adult assembly is required.
If your little one is crawling, place the Double-Sided Table
Insert onto the floor with the Activity Center side facing
upwards for seated play.
If your little one is starting to stand, insert the Legs into the
Table Top and place the Double-Sided Table Insert into the
Table Top to encourage standing up and walking.
1. Lay the Table Top down on a flat
surface with the underside facing up.
Next, insert and firmly snap the four
Legs into the slots at each of the four
corners.
Note: Once the Legs are assembled
to the Table Top, they can not be
disassembled.
2. Flip the table over so it’s standing
on the four Legs. Next, place the
Double-Sided Table Insert into the
Table Top. Now, the table is ready
for play.
7

3. To switch sides of the Double-Sided
Table Insert, first slide and hold the
Lock Release Latch on the underside
of the Table Top.
4. Then, remove the Double-Sided Table
Insert, flip the insert over and place
it into the Table Top. Repeat these
steps to switch back.
NOTE: The Off/Low/High Volume
Switch is located on the Letter
Center side only.
8
222

9
GETTING STARTED
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Find the battery cover located on the Activity Center side of
the insert, use a screwdriver to loosen the screw, and then open
the battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AA (AM-3/LR6) batteries following the diagram
inside the battery box. (For best performance, alkaline
batteries or fully charged Ni-MH rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.

10
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from the toy
before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte. Tenir les piles ou accumulateurs hors de portée des
enfants.