LeapFrog Sorting Surprise Turtle 6024 User manual

Instruction Manual
This manual contains important information. Please keep it for future reference.
91-003484-015 US CA
F.P.O
TM

2
Off/Low/High
Volume Switch
Shape Blocks
Shape Sorter
Butterfly
Plunger
Light-Up
Flower Button
INTRODUCTION
Thank you for purchasing Sorting Surprise Turtle™! As your
child inserts the five colored shape blocks into the turtle’s
shell, they will learn about numbers, shapes, and color names,
as well as practice their fine motor and hand-eye coordination
skills. The toy includes numerous rhymes and songs to reinforce
learning and encourage your child to press the plunger for
block tumbling fun.

3
INCLUDED IN THIS PACKAGE
• 1 Sorting Surprise TurtleTM
• 1 blue circle block
• 1 red heart block
• 1 purple triangle block
• 1 orange square block
• 1 yellow star block
• 1 Instruction Manual
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il
comporte des informations importantes.

4
Unlock the Packaging Locks
Getting Started
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use
screwdriver or coin to loosen the screw and then open the
battery cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 2 new AA (AM-3/LR6)
batteries following the diagram
inside the battery box. (For
best performance, alkaline
batteries or fully charged Ni-MH
rechargeable batteries are
recommended.)
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or
rechargeable batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult supervision.
• Do not charge non-rechargeable batteries.
IMPORTANT : INFORMATIONS CONCERNANT LES PILES
Les piles fournies avec le produit permettent de tester le jouet
en magasin mais ne sont pas des piles longue durée.
• Mettre en place les piles ou les accumulateurs en
respectant les polarités + et –.
• Ne pas mélanger des piles ou des accumulateurs neufs
avec des usagés.
• Ne pas mélanger différents types de piles : alcalines, zinc-
carbone et rechargeables.
•
Seules des piles du type recommandé doivent être utilisées.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Enlever les piles ou les accumulateurs usagés du jouet.
• Ne les jeter ni au feu ni dans la nature.
PILES RECHARGEABLES
• Enlever, lorsque c’est possible, les accumulateurs du jouet pour les
recharger.
• Les accumulateurs ne doivent être chargés que sous la surveillance
d’un adulte.
• Ne pas tenter de recharger des piles non rechargeables.

6
PRODUCT FEATURES
1. Off/Low/High Volume Switch
To turn the unit ON, slide the Off/Low/
High Volume Switch to the Low Volume
or the High Volume position.
To turn the unit OFF, slide the Off/Low/
High Volume Switch to the OFF position.
2. Shape Sorter
Insert a Shape Block by matching the color, shape or number
to the holes in the shell. Once inserted, hear the names of
colors, shapes and numbers with fun musical sounds.
3. ButteryPlunger
Push the Butterfly Plunger down to spin the shell and make
the Shape Blocks tumble out as you hear musical responses
with learning rhymes and phrases.
Note: Please keep away from eyes and face. Don’t put
objects other than the included Shape Blocks into the holes
or inside the turtle’s shell.
4. Light-Up Flower Button
Press the Light-Up Flower Button on the turtle’s head to
listen to fun learning songs.

7
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit On. The unit should now be ready to play again.
5. If the unit still does not work, install a new set of batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or
email [email protected]om. Creating and developing
LeapFrog products is accompanied by a responsibility that
we take very seriously. We make every effort to ensure
the accuracy of the information, which forms the value of
our products. However, errors sometimes can occur. It is
important for you to know that we stand behind our products
and encourage you to contact us with any problems and/or
suggestions you might have. A service representative will
be happy to help you

8
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de L’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
NOTE
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:

9
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: LeapFrog®
Model: 6024
Product Name: Sorting Surprise Turtle™
Responsible Party: LeapFrog Enterprises, Inc.
Address: 2200 Powell Street, Suite 500,
Emeryville, CA 94608
Website: leapfrog.com
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.

Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
leapfrog.ca
Read our complete warranty policy online at
leapfrog.com/legal
91-003484-015 US CA
LeapFrog Enterprises, Inc.
A subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.
Printed in China.