LeapFrog Storytime Bella Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003501-003 US

2
INTRODUCTION
Thank you for purchasing Storytime BellaTM. Bella is a soft and
huggable talking friend who reads five engaging storybooks and
teaches reading comprehension skills, letters, colors, shapes,
numbers, emotions, and opposites. Storytime BellaTM features a
light-up collar button and sings seven songs. When it’s time for
bed, Bella’s collar softly changes colors as she plays soothing
lullabies. Bella features five story buttons on her collar, four
learning buttons on her paws, and comes with five storybooks.
Collar Button
Story Buttons
Reading
Comprehension
Button
Letter Button
Nighttime
Button
Learning Song
Button

3
INCLUDED IN THIS PACKAGE
• One Storytime BellaTM
• Five storybooks
• One parent’s guide
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE:
Please keep this parent’s guide as it contains important
information.
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
bottom of the unit.
3. Use a screwdriver to loosen the
screw and open the battery cover.
4. Install 2 new AA (AM-3/LR6)
batteries into the battery box
as illustrated. (The use of new
alkaline batteries is recommended
for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

4
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under
adult supervision.
MISE EN GARDE
• Utilisez de nouvelles piles alcalines pour une performance
maximale.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

5
PRODUCT FEATURES
1. Off/Low/High Volume Switch
The Off/Low/High Volume Switch is located inside the back
of the toy. Slide from the Off position to either Low or High
to start playing and adjust volume.
2. Story Buttons
3. Light-up Collar Button
4. Reading Comprehension Button
5. Letter Button
6. Song Button
7. Nighttime Button
ACTIVITIES
1. Storytime
Press a Story Button to hear Bella read one
of the five storybooks.
2. Paw Buttons
Press one of Bella’s four paw buttons to
hear reading comprehension questions,
letter learning, songs and more.

6
3. Bedtime Story Mode
Press the Nighttime Button to hear Bella
say, “Snuggle up”. Then, she prompts the
child to choose a bedtime story. Bella reads
the story chosen or chooses one of her own,
reading without requesting page turns, for
a gentle transition into sleep.
4. Nightlight Mode
Press the Nighttime Button twice to enter Nightlight Mode.
Bella will say, “Nighty Night!” This is followed by a soft
rainbow light show and 10 minutes of soothing lullabies.
Press any button to stop the lights and music.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back ON. The unit will now be ready to
play again.
5. If the unit still does not work, replace with an entire set

7
of new batteries.
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.

8
réinitialiser l’appareil.
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)

Read our complete warranty policy online at
leapfrog.com/warranty.

91-003501-003 US
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
LeapFrog Enterprises, Inc.,
A subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.