LeapFrog Safari Learning Station Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003546-000 US
TM

2
INTRODUCTION
Thank you for purchasing the LeapFrog Safari Learning Station.
This toy can be configured for seated play or set up for crawling
and standing play. Three modes of learning encourage your
child to explore first words, numbers, shapes, colors, animals,
music play, Spanish words and more. Physical features including
a ball drop, hanging leaves, spinning dial, and bead spinner
encourage your child to exercise their developing motor skills.
OFF/LOW/
HIGH volume
switch
Mode selector
switch
123 counting
song button
ABC song
button
Five piano
keys
Bead spinner
Conversion
feature
Ball drop
5 hanging
leaves
Butterfly wing
flapping
LED screen
Weather dial
Light-up
color wheel

3
INCLUDED IN THIS PACKAGE
• One LeapFrog Safari Learning Station™
• 3 balls
• One LeapFrog Safari Learning Station™ instruction manual
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION:
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE:
• Il est conseillé de conserver ce guide des parents car il
comporte des informations importantes.
Unlock the packaging locks:
Rotate the packaging lock 90
degrees counter clockwise.
Pull out the packaging lock.

4
GETTING STARTED
POWER SOURCE
The LeapFrog Safari Learning Station™ operates on 2 AA sized
batteries (AM-3/LR6). The AA sized batteries included in the
unit are for demo purposes only and are not long-life batteries.
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the unit.
3. Use a screwdriver to loosen the screw and open the
battery cover.
4. Install 2 new AA (AM-3/LR6) batteries into the battery
box as illustrated. (The use of new alkaline batteries is
recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.

5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-
utilisation prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte..

6
PRODUCT FEATURES
1. Conversion feature
Remove the yellow post to swivel the arch up or down to
encourage different types of play including seated play,
standing play, and crawling play.
ASSEMBLY
With the Leapfrog® Safari Learning Station™ safety comes
first. To ensure your child’s safety, adult assembly is required.
NOTE:
Adjust the desired angle of the Activity Panel, then tighten
each leg screw until you hear a “click”. The click signals when
the safety lock has been enabled.

7
2. Off/Low/High Volume Switch
Slide from OFF position to either Low or
High to start playing and adjust volume.
3. 3 Play Modes
Slide the MODE SWITCH to select a
play mode.
Music Mode: Explore music with safari
beats, fun sound effects, and musical
play.
Explore Mode: Learn first words
Learn Mode: Learn about shapes,
animals, numbers and colors with fun
phrases and songs.
4. ABC song button
Giraffe’s ABC button plays a variety of
catchy, Safari-themed tunes, including
an A-Z learning song
5. 123 counting song button
Zebra’s 123 button plays a variety of
catchy, Safari-themed tunes, including
a 1-20 learning song.

8
6. LED screen
Press Lion’s arrow paws to scroll through
letters A to Z, numbers 1 to 20, and
shapes including circle, square, and
triangle.
7. Color wings
Flip Butterfly’s wings to learn about
colors including blue, red, green, and
purple.
8. Light-up color wheel
Spin Chameleon’s tail to see a rainbow
light show and hear fun phrases about
science and color names.
9. Five piano keys
Press the piano keys to make music and
learn about shapes and colors.

9
10.5 hanging leaves
Pull on the hanging leaves to learn about
numbers.
11. Ball drop
Drop balls through Monkey’s tail to hear
fun sounds and learn about counting.
12. Bead spinner
Spin the colorful bead spinner in
Elephant’s belly.
13. Weather dial
Move the weather dial to learn about
weather and fun phrases in Spanish.

10
14. AUTOMATIC POWER OFF
To save power, the LeapFrog Safari
Learning Station™ automatically shuts
down if it does not have any input after
several minutes. Press any button or slide
the OFF/LOW/HIGH switch to turn the
unit on again.
ACTIVITIES
• Activity 1: Explore letters and words with the Giraffe’s ABC
button and Lion’s screen.
• Activity 2: Practice numbers and counting skills with Zebra’s
123 button, the hanging leaves, and Lion’s screen.
• Activity 3: Engage in creative play with music and colors
with Chameleon and the piano keys.
• Activity 4: Stimulate gross and fine motor skills by spinning
Elephant’s ball roller, dropping balls through Monkey’s tail,
and crawling under the leaf arch.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries when the unit is not in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.

11
TROUBLESHOOTING
If for some reason the program/activity stops working, please
follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back ON. The unit will now be ready to play
again.
5. If the unit still does not work, replace with an entire set of
new batteries.
Environmental phenomena.
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
Impact de l’environnement.
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.

12
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
Supplier’s Declaration of Conformity
Trade Name: Leapfrog®
Model: 6045
Responsible Party: Leapfrog Enterprises, Inc.
Address: 6401 Hollis Street, Suite 100,
Emeryville, CA 94608
Website: www.leapfrog.com
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.

13
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)

Read our complete warranty policy
online at
leapfrog.com/warranty.
LeapFrog Enterprises, Inc.,
a subsidiary of VTech Holdings Limited.
TM & © 2018 LeapFrog Enterprises, Inc.
All rights reserved.
Visit our website for more
information about our products,
downloads, resources and more.
leapfrog.com
91-003546-000 US