LeapFrog Interactive Wooden Animal Puzzle User manual

Wooden
WoodenWoodenWooden
Interactive
InteractiveInteractiveInteractive
Puzzle
PuzzlePuzzlePuzzle
Animal
AnimalAnimalAnimal
Instruction Manual
This manual contains important information. Please save it for future reference.

2
INTRODUCTION
Thank you for purchasing the Interactive Wooden Animal Puzzle
TM
!
Explore four play modes in this interactive wooden puzzle that
teaches animal names, animal sounds, French words, colours and
counting. Add and remove puzzle pieces to answer questions
about animals, to reveal hidden objects, to explore counting, to
hear words in French and to play sounds along with background
music. Enjoy the challenge of traditional puzzles with the fun of
animal sounds and music.
Puzzle Pieces
4 Light-Up
Mode Buttons Off/Low/
High Volume
Selector
NOTE
This product is in Try-Me mode in the packaging. After opening
the package, slide the Off/Low/High Volume Selector to the
Off position, then slide the Off/Low/High Volume Selector to
the Low/High position. If the unit powers down while playing,
please install a new set of batteries.
NOTE
Ce produit est en mode Démonstration dans sa boîte. Pour
sortir de ce mode, déplacer le curseur Marche/Arrêt/Réglage
du volume sonore sur la position Arrêt puis rallumer le jouet. Il
sera prêt à fonctionner normalement. Si le jouet s’éteint de façon
répétitive pendant que votre enfant joue, nous vous conseillons
de changer les piles.

3
INCLUDED IN THE PACKAGE
• Interactive Wooden Animal Puzzle ™
• 1 giraffe puzzle piece
• 1 zebra puzzle piece
• 1 parrot puzzle piece
• 1 lion puzzle piece
• 1 elephant puzzle piece
• 1 crocodile puzzle piece
• Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE
Please save this Instruction Manual as it contains important
information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes, cordons et vis d’emballage. Ils
ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’instructions car il
comporte des informations importantes.
NOTE: The Interactive Wooden Animal Puzzle™ uses IR technology
that may not work well in full sunlight conditions. Please do not
use the toy in direct sunlight.
NOTE : Ce jouet fonctionne grâce à une technologie infrarouge
dont l’efficacité peut être altérée en cas d’exposition directe à la
lumière du soleil. Nous vous recommandons de ne pas utiliser ce
jouet en extérieur.
NOTE: Please ask us about the availability ofFSCTM Products.
NOTE : Merci de nous consulter pour connaître la disponibilité
des produits FSCTM.

4
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Find the battery cover located on the back of the unit, use a
screwdriver to loosen the screw and then open the battery
cover.
3. Remove old batteries by pulling up on one end of each
battery.
4. Install 3 new AAA (AM-4/LR03) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
PRODUCT FEATURES
1. Off/Low/High Volume Selector
To turn the unit On, slide the Off/Low/
High Volume Selector to the Low or
High position. To turn the unit Off,
slide the Off/Low/High Volume Selector
to the Off position.

6
2. Four Light-Up Mode Buttons
Press to choose between four ways to
play:
Animals Mode
Press to learn about animal names,
colours, animal sounds and fun facts.
Numbers Mode
Press to learn about numbers 1-6, counting and objects
under each animal.
French Mode
Press to learn about animal names, colours, counting and
objects in French.
Music Mode
Press to hear and make music. Add and remove puzzle
pieces to create sounds.
3. Automatic Shut-off
To preserve battery life, the
Interactive Wooden Animal Puzzle™
will automatically shut off after
approximately 60 seconds without
input. The unit can be turned on again
by pressing any of the four Light-Up
Mode Buttons.
ACTIVITIES
1. Animals Mode
Press to hear an animal question, then
add and remove pieces to explore animal
names and sounds, fun facts and colours.
FR

7
2. Numbers Mode
Press to play a game exploring colours,
counting and numbers.
3. French Mode
Press to hear animal names, colours,
counting and objects in French.
4. Music Mode
Press to play five background tunes and
ambient sounds. Add and remove animal
pieces to create sounds and music. Enjoy
background music during puzzle play.
SONG LYRICS
All around our beautiful planet,
There are so many animals that we can hear.

8
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please
follow these steps:
1. Please turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit back On. The unit should now be ready to use
again.
5. If the unit still does not work, install a new set of batteries.

9
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. and Canada, or email
[e-mail]. Creating and developing LeapFrog
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions you
might have. A service representative will be happy to help you.

10
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
CAUTION:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.