LeapFrog leapland Adventures Assembly Instructions

Parents’ Guide
This guide contains important information. Please keep it for future reference.
91-003970-001 UK

2
INTRODUCTION
Thank you for purchasing the LeapLand Adventures™ learning video
game! Hunt for the four missing keys to unlock Clever Castle and learn
about letters, shapes, numbers and colours along the way.
INCLUDED IN THIS PACKAGE
• 1 wireless controller
• 1 HDMI game stick
• 1 micro USB power cable
• 1 HDMI extender cable
• Parents’ guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part of
this toy and should be discarded for your child’s safety.
NOTE
Please keep this parent’s guide as it contains important information.
Unlock the Packaging Locks
Rotate the packaging lock anticlockwise for 90
degrees
Pull out the packaging locks.
D-Pad B Button
A Button
Home Button Help Button
HDMI Game Stick
Micro USB
Power Cable
HDMI
Extender Cable

3
GETTING STARTED
INITIAL SETUP
For your child’s safety, the following steps must be assembled by an adult.
1. Plug the USB B Connector end of the Micro USB
Power Cable into the USB B port on the HDMI
Game Stick.
2. Plug the HDMI Game Stick into an HDMI port on
your television.
3. Plug the USB A Connector end of the Micro USB
Power Cable into a USB port on your television
or other qualified DC 5V adapter with output no
less than 500mA.
Note: If the HDMI Extender Cable is needed, plug the HDMI Game Stick
into the HDMI Extender Cable. Plug the HDMI Extender Cable
into an HDMI port on your television.
BATTERY REMOVAL AND INSTALLATION
1. Find the battery cover located on the back of the
Wireless Controller, use a coin or screwdriver to
loosen the screw and then open the battery cover.
2. Remove old batteries by pulling up on one end
of each battery.
3. Install 2 new AA (AM-3/LR6) batteries following
the diagram inside the battery box.
4. Replace the battery cover and tighten the screw
to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

4
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are
to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates they
must not be disposed of in domestic waste as they contain
substances that can be damaging to the environment and
human health.
The chemical symbols Hg, Cd or Pb, where marked, indicate
that the battery contains more than the specied value of
mercury (Hg), cadmium (Cd) or lead (Pb) set out in the
Batteries and Accumulators Regulation.
The solid bar indicates that the product was placed on the
market after 13th August, 2005.
Help protect the environment by disposing of your product or
batteries responsibly.
LeapFrog®cares for the planet.
Care for the environment and give your toy a second life by disposing
of it at a small electricals collection point so all its materials can be
recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.

5
Safety information when using power supply for toys
LeapFrog recommend a power supply (AC/DC adaptor) of the below
specification:
Power rating: 5V/500mA or 5V/1A DC output
• Use Leapfrog or any standard adaptor Comply with EN61558
• This toy shall only be used with a power supply for toys.
• The power supply is not a toy.
• This toy is not intended for use by children under 3 years old.
• Do not connect the toy to more than the recommended number of
power supplies.
• Never clean a plugged in toy with liquid.
• Please examine the power supply periodically for conditions that
may result in the risk of fire, electric shock, or injury to persons (such
as damage to the supply cord, output cord, plug, blades, housing,
or other parts) and that, in the event of such conditions, the power
supply should be scrapped.
• Power supplies for toys are not intended to be used as toys, and the
use of these products by children shall be under the full supervision
of parents.
Warning! Not suitable for children under 36 months. Transformer toy.
Electric shock hazard.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries from the toy before charging.
• Rechargeable batteries are only to be charged under
adult supervision.
• Do not charge non-rechargeable batteries.
NOTE
If the Wireless Controller powers down or if the light fades out during
play, please install a new set of batteries.
PRODUCT FEATURES
1. D-Pad
Press the D-Pad on the Wireless Controller to select an item on the
Menu screen. While playing the game, press the D-Pad left and right

6
to move the character around the screen. Press down on the D-Pad
to make the character crouch and press left or right on the D-Pad
to make the character walk while crouching.
2. Home Button
Press the Home Button on the Wireless Controller to quit a level,
quit the game, or return to the previous Menu screen.
3. Help Button
Press the Help Button on the Wireless Controller to hear hints and
tips on how to play the game or navigate the Menu screen.
4. A Button
• Press the A Button on the Wireless Controller to select the
highlighted objects on the Menu screen.
• Press the A Button to make the character jump.
• Press the A Button a second time while the character is in the air
to make the character double-jump.
• Press the A Button repeatedly to get the character out of a
bubble trap.
• When two treasure chests appear on the screen, press the A Button
to select the treasure chest on the left.
5. B Button
• Press the B Button on the Wireless Controller to return to the
previous Menu screen, or to change the playable character while
on the Map Menu screen.
• If a B Button icon appears above a Curricular Character’s head,
press the B Button to interact with that character.
• When two treasure chests appear on the screen, press the B Button
to select the treasure chest on the right.
6. Menu Screens
The following Menu screens appear in
the game.
Save Selection Screen
• Create or delete a saved profile on
the Save Selection screen.
• To recover a saved file that has been
accidentally deleted, highlight a New
save slot and press the following

7
buttons on the Wireless Controller: Home + Home + Help + Help
+ B + B + Help + Home + B. This will recover the deleted file.
• To unlock all the castle rewards in the game, highlight an existing
saved profile and press the following buttons on the Wireless
Controller: Home + Home + Help + Help + B + B + Help + Home + B.
Map Menu Screen
• Access the different areas of the
game from the Map Menu screen.
• The player will need to find at least
one key before the castle area can
be accessed.
• To change the playable character,
press the B Button.
• To exit the game, press the Home Button.
• View castle rewards on the Map Menu
screen after every Gem Festival.
Learning Centre
• Access the learning curriculum
content from the Learning Centre.
Level Select Screen
• Use the arrow buttons on the D-Pad
to highlight an unlocked level.
• Press the A Button to select a
highlighted level.
• Levels can only be unlocked once a
previous level has been successfully
completed.
7. In-Game Items
The following in-game items appear throughout the game.
Gems
• Players can collect Gems in every level.
• Players can also find Gems in treasure chests.
• When all of the levels in an area are completed, stars are rewarded
to the player for the total number of Gems that they have collected.
• The game can be completed multiple times using a saved profile.
• Each completion will present the player with different Gems
to collect.

8
Cleverberries
• Players can collect Cleverberries in every level.
• Players can also find Cleverberries in treasure chests.
• Cleverberries give the playable character one heart of health.
8. In-Game Obstacles
The following are some of the in-game obstacles that players will
encounter. These in-game obstacles remove one heart of health if
the playable character touches them.
Thorns
Flytrap
Spiked Flower
Cactus
Spiked Cactus
Electric Box
Large Floating Bubble
Wooden Log
Rubbish Bin
Thorned Tumbleweed
Fire Plant Projectiles

9
9. In-Game Characters
The following are some of the in-game characters that players will
interact with.
Curricular Characters
• The Curricular Characters teach fun facts about themselves.
• The Letter Curricular Characters can be found in the Letterland
area of the Map Menu screen, or in the Learning Centre.
• The Number Curricular Characters can be found in the Numberville
area of the Map Menu screen, or in the Learning Centre.
• The Shape Curricular Characters can be found in the Shapetown
area of the Map Menu screen, or in the Learning Centre.
• The Colour Curricular Characters can be found in the Colour Springs
area of the Map Menu screen, or in the Learning Centre.
Pixies
• The Pixies are silly and mischievous, and they do their best to
prevent the player from finding the keys to Clever Castle.
• Some of the Pixies will remove one heart of health if the playable
character touches them.
• The Pixies appear in many different shapes and colours; some fly,
some swim, and some pop up from underground.
10. Automatic Shut-Off
To preserve battery life, the Wireless Controller will automatically
go into sleep mode after approximately 1 minute without input. The
unit can be turned on again by pressing the D-Pad, Home Button,
A Button or B Button.
11. Screen Saver Mode
LeapLand Adventures™ will automatically save and quit the current
game, then go into Screen Saver mode after approximately 20
minutes without input. To exit Screen Saver mode, press the D-Pad,
Home Button, A Button or B Button on the Wireless Controller.

10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to
moisture or water.
5. Always keep the Wireless Controller and HDMI Game Stick away
from water.
6. Examine the Micro USB Power Cable and the HDMI Extender Cable
regularly, checking for damage to the cables, plugs and other parts.
Do not use the Micro USB Power Cable or HDMI Extender Cable if
there is any damage.
7. This toy is only to be connected to equipment bearing either of the
following symbols: or
TROUBLESHOOTING
If you are unable to insert the HDMI Game Stick directly into the HDMI
port on your television due to clearance issues, use the included HDMI
Extender Cable.
If for some reason the unit stops working or malfunctions, please follow
these steps:
HDMI Game Stick
1. Interrupt the power supply by unplugging the USB A Connector end
of the Micro USB Power Cable from the USB port on your television
or other qualified DC 5V adapter with output no less than 500mA.
2. Unplug the HDMI Game Stick from the HDMI port on your television.
3. Wait for 10 Seconds, then plug the HDMI Game Stick into the HDMI
port on your television.
4. Plug the USB A Connector end of the Micro USB Power Cable into
the USB port on your television or other qualified DC 5V adapter
with output no less than 500mA. The unit will now be ready
to play again.