LeapFrog LeapBuilders Safari Animals Assembly Instructions

91-003552-008 US
TM
Parent’s Guide
This guide contains important information. Please keep it for future reference.
Safari AnimalsSafari Animals

2
INTRODUCTION
Thank you for purchasing the LeapBuilders®Safari Animals™set.
This interactive building set comes with six double-sided learning
blocks and 10 building pieces, including an electronic Smart
Star™ cube. Insert the learning blocks into the interactive Smart
Star™ cube to learn about insects, animals and colors. Inspire
open-ended creativity and stacking fun with all the pieces.
On/Off/Volume
Control Switch
Music Button
Question Button Smart Star™
Cube

3
INCLUDED IN THIS PACKAGE
• One Interactive Smart Star™ Cube
• Nine Non-Electronic Building Pieces

4
• Six Double-Sided Learning Blocks
Front
Back
• Three double-sided building cards
• One parent's guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cord and packaging screws
are not part of this toy, and should be discarded for your child’s
safety.
NOTE:
Please keep this parent's guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.

5
GETTING STARTED
BATTERy INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the
back of the unit. Use a screwdriver
to loosen the screw.
3. Install 2 new AAA batteries
following the diagram inside the
battery box. (The use of new
alkaline batteries is recommended
for maximum performance.)
4. Replace the battery cover and
tighten the screw to secure.
Unlock the packaging locks:
Rotate the packaging lock 90 degrees
counterclockwise.
1
2Pull out the packaging lock and discard.

6
BATTERy NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-utilisation
prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

7
PRODUCT FEATURES
1. On/Off/Volume Control Switch
To turn the unit On, slide the
On/Off/Volume Control Switch
to the Low Volume or High
Volume position. To turn
the unit Off, slide the On/Off/
Volume Control Switch to the
Off position.
2. Automatic Shut Off
To preserve battery life, the LeapBuilders® Safari Animals™
set will automatically shut off after approximately 90 seconds
without input. The unit can be turned on again by pressing any
button or by inserting a Learning Block into the interactive
Smart Star™ Cube.
NOTE: This product is in Try-Me mode in the packaging. After
opening the package, turn the product off and on again
to proceed with normal play. If the unit powers down
while playing, please install a new set of batteries.
ACTIVITIES
1. Music Button
Press the Music Button to hear
short tunes and sing-along songs
about animals. The lights will flash
with the sounds.

8
2. Question Button
Press the Question Button to
hear fun sound effects, interactive
questions and short tunes. The
lights will flash with the sounds.
3. Smart Star™ Cube
Insert the double-sided Learning
Blocks into the interactive Smart
Star™ Cube to learn about insects,
animals and colors. The lights will
flash with the sounds.
4. Stacking Fun
Stack the blocks onto the electronic
Smart Star™ Cube to hear fun
sound effects, phrases and short
tunes.
5. Mix and Match
For added fun, the LeapBuilders® Safari Animals™set
interacts with the Learning Blocks from other LeapBuilders®
sets. Simply put a Learning Block from another LeapBuilders®
set into the interactive Smart Star™ Cube to see flashing
lights and hear learning phrases and short tunes (additional
sets sold separately). Please note, blocks from sets in
different languages have unique audio responses and cannot
be used interchangeably.

9
SING-ALONG SONG LyRICS
Song 1
Animals, let’s make animals.
Animals of every size, every shape and every color.
It’s so much fun to make the animals!
Song 2
Come on, let’s play.
With all of the animals in our zoo.
Just for today.
They’ve come from the jungle to play!
Song 3
Learning can be lots of fun,
With LeapBuilders.
Learning blocks for everyone,
We're learning with LeapBuilders now. Yeah!
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp
cloth.
2. Keep the unit out of direct sunlight and away from any
direct heat source.
3. Remove the batteries when the unit will not be in use for
an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.

10
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions,
please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the
batteries.
4. Turn the unit ON. The unit will now be ready to use again.
5. If the unit still does not work, install a brand new set of
batteries.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email support@
leapfrog.com. Creating and developing LeapFrog®products is
accompanied by a responsibility that we take very seriously. We
make every effort to ensure the accuracy of the information,
which forms the value of our products. However, errors
sometimes can occur. It is important for you to know that
we stand behind our products and encourage you to contact
us with any problems and/or suggestions you might have. A
service representative will be happy to help you.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.