LeapFrog Scrub 'n Play Smart Sink Assembly Instructions

91-003698-000 US
Parent’s Guide
This guide contains important information. Please keep it for future reference.
’n
’n’n’n Play
PlayPlayPlay
Scrub
ScrubScrubScrub
Smart
SmartSmartSmart Sink
SinkSinkSink

2
INTRODUCTION
Thank you for purchasing the Scrub ’n Play Smart Sink™ . Play pretend
dishwashing with three plates, two cups and a scrub brush. Press the star
activity button for listening comprehension activities and follow along
with the washing instructions. Turn the play faucet to hot or cold, count
along while pressing the soap pump, then press the faucet to see the
play water spin. Load the colorful dishes into the matching slots in the
drying rack. Open and close the dishwasher door to hear the fun sounds.
This unit should never be used with real water.
Clock
Cabinet
Scrub Brush
Light-Up Faucet
with Hot/Cold
Handle
1 Medium Red Plate
1 Small Yellow Plate
Dishwasher
Cup Hooks
Off/Low/High
Volume Selector
Dish Rack
1 Large Green Plate
Soap Pump
1 Red Cup
Brush Tray
Sink
1 Yellow Cup
Water Splash
Spinner
Star Activity
Button

3
INCLUDED IN THIS PACKAGE
• One Scrub ’n Play Smart Sink ™
• One large green plate
• One medium red plate
• One small yellow plate
• One red cup
• One yellow cup
• One scrub brush
• One parent’s guide
WARNING:
All packing materials, such as tape, plastic sheets, packaging
locks, removable tags, cable ties and packaging screws are not
part of this toy, and should be discarded for your child’s safety.
NOTE:
Please keep this parent’s guide as it contains important
information.
ATTENTION :
Pour la sécurité de votre enfant, débarrassez-vous de tous
les produits d’emballage tels que rubans adhésifs, feuilles de
plastique, attaches, étiquettes et vis d’emballage. Ils ne font
pas partie du jouet.
NOTE :
Il est conseillé de conserver ce guide des parents car il comporte
des informations importantes.
WARNING:
This is not a water toy. Water will damage the toy.
ATTENTION :
Ceci n’est pas un jouet destiné à être utilisé avec de l’eau.
Lui éviter tout contact avec l’eau au risque de l’abîmer.
Note :
Please cut and discard the cords before
playing with the unit. The cords are not part
of the product and should be discarded for
your child’s safety.

4
GETTING STARTED
BATTERY INSTALLATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the unit.
3. Use a screwdriver or coin to loosen the screw and open the
battery cover.
4. Install 3 new AAA (AM-4/LR03) batteries into the battery
compartment as illustrated. (The use of new alkaline
batteries is recommended for maximum performance.)
5. Replace the battery cover and tighten the screw to secure.
Rotate the packaging locks 90 degrees
counterclockwise.
Pull out the packaging locks and discard.
Unlock the packaging locks:

5
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard
(carbon-zinc) or rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging
(if removable).
• Rechargeable batteries are only to be charged under adult
supervision.
MISE EN GARDE
• Utiliser des piles alcalines neuves pour des performances
maximales.
• Seules des piles du type recommandé doivent être utilisées.
• Ne pas mélanger différents types de piles ou d’accumulateurs,
ne pas mélanger des piles ou des accumulateurs neufs avec
des usagés.
• Ne pas utiliser des piles ou des accumulateurs endommagés.
• Mettre en place les piles ou les accumulateurs en respectant
les polarités + et –.
• Ne pas mettre les bornes d’une pile ou d’un accumulateur
en court-circuit (en reliant directement le + et le –).
• Enlever les piles ou les accumulateurs usagés du jouet.
• Retirer les piles ou les accumulateurs en cas de non-utilisation
prolongée.
• Ne les jeter ni au feu ni dans la nature.
• Ne pas tenter de recharger des piles non rechargeables.
• Enlever les accumulateurs du jouet pour les recharger.
• Les accumulateurs ne doivent être chargés que sous la
surveillance d’un adulte.

6
PRODUCT FEATURES
1. Off/Low/High Volume Selector
To turn the unit On, slide the Off/Low/
High volume selector to the Low
or High position. To turn the unit Off,
slide the Off/Low/High volume selector
to the Off position.
2. Dish Rack and Plates
Match the Plate by color , size or number
to the correct slot in the Dish Rack to
hear its size or color. Remove the Plate
to hear fun phrases, counting or a song
about sizes and colors.
3. Light-Up Faucet, Hot/Cold
Handle & Water Splash Spinner
Turn the Hot/Cold Handle to select the
temperature, hear a song about washing
dishes and light up the Faucet. Press the
Hot/Cold Handle down to hear water
sounds and watch the Water Splash
Spinner at the bottom of the sink spin
like draining water.
4. Three-Cycle Dishwasher
Open the Dishwasher door to put dishes
inside and close the door. Next, slide the
selector to choose between three cycles:
Wash, Rinse or Dry. Hear fun sounds or
a counting song from 1 to 10.

7
5. Star Activity Button
Press the Star Activity button to hear
suggested activities for pretend play
using other features of the toy.
6. Soap Pump
Press the Soap Pump to count along
from 1 to 10.
7. Scrub Brush and Two Cups
Pretend to clean by using the Scrub
Brush with its turning bristle head to
scrub the two Cups.
8. Sliding Cabinet With Clock
Slide the Cabinet door from side to side
to reveal numbers and change the time
on the rotating Clock.

8
ACTIVITIES
1. Hand Wash Dishes
Pretend to hand wash dishes in the sink by using the Plates
and Cups with the Soap Pump, Scrub Brush and Light-Up
Faucet. Follow the three steps shown on the Brush Tray:
Soap, Scrub and Rinse. Afterwards, put the dishes away into
their matching places in the Dish Rack.
2. Dishwasher Play
Put Plates or Cups inside the Dishwasher and close the
dishwasher door. Next, slide to choose the dishwasher cycle
to pretend to go through all three cycles: Wash, Rinse and Dry.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from direct
heat sources.
3. Remove the batteries when the unit will not be in use for an
extended period of time.
4. Do not drop the unit on a hard surface and do not expose
the unit to excess moisture.
TROUBLESHOOTING
If for some reason the unit stops working or can’t be turned on
again, please follow these steps:
1. Turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play
again.
5. If the unit does not work, replace with an entire new set of
batteries.

9
Impact de l’environnement
Une défaillance de fonctionnement de l’appareil peut
survenir s’il est sujet à des interférences avec les fréquences
radioélectriques. Le fonctionnement normal de l’appareil devrait
reprendre avec l’arrêt des interférences. Si ce n’est pas le cas, il
peut s’avérer nécessaire d’éteindre et rallumer l’appareil ou de
retirer et réinstaller les piles. Dans l’éventualité peu probable
d’une décharge électrostatique, un mauvais fonctionnement
et une perte de mémoire de l’appareil peuvent se produire.
L’utilisateur doit alors retirer et réinstaller les piles pour
réinitialiser l’appareil.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services
Department at 1-800-701-5327 in the U.S. or email
[e-mail]. Creating and developing LeapFrog®
products is accompanied by a responsibility that we take
very seriously. We make every effort to ensure the accuracy
of the information, which forms the value of our products.
However, errors sometimes can occur. It is important for you
to know that we stand behind our products and encourage
you to contact us with any problems and/or suggestions
you might have. A service representative will be happy to
help you.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power OFF and back ON, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.

10
NOTE:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician
for help.
Caution: Changes or modifications not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment.