LeapFrog Touch & Learn Nature ABC Board Assembly Instructions

Parent’s Guide
This guide contains important information. Please keep it for future reference.
91-003996-001 UK

2
INTRODUCTION
Thank you for purchasing the Touch & Learn Nature ABC
Board™. Go on a learning adventure and explore letters,
counting, animals and weather!
Letter Name
Game
Counting
Game
Animals
Game
Nature
Activities
Letter
Sounds
Game
On/Off/
Volume
Selector
Music
Button
LED Button
Letter
Buttons

3
INCLUDED IN THE PACKAGE
• Touch & Learn Nature ABC Board™
• Quick Start Guide
WARNING:
All packing materials such as tape, plastic sheets, packaging
locks, removable tags, cable ties, cords and packaging screws
are not part of this toy and should be discarded for your child’s
safety.
NOTE:
Please keep this parent’s guide as it contains important
information.

4
INSTRUCTIONS
BATTERY REMOVAL AND INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the back of the unit. Use a
screwdriver to loosen the screw.
3. If used batteries are present, remove these batteries from
the unit by pulling up on one end of each battery.
4. Install 2 new ‘AA’ (AM-3/LR6) batteries following the
diagram inside the battery box. (For best performance,
alkaline batteries or fully charged Ni-MH rechargeable
batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.

5
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as
recommended are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in
fire.
RECHARGEABLE BATTERIES:
• Remove rechargeable batteries from the toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
Disposal of batteries and product
The crossed-out wheelie bin symbols on products and
batteries, or on their respective packaging, indicates
they must not be disposed of in domestic waste as
they contain substances that can be damaging to the
environment and human health.
The chemical symbols Hg, Cd or Pb, where marked,
indicate that the battery contains more than the
specified value of mercury (Hg), cadmium (Cd) or
lead (Pb) set out in the Batteries and Accumulators
Regulation.
The solid bar indicates that the product was placed
on the market after 13th August, 2005.
Help protect the environment by disposing of your
product or batteries responsibly.

6
LeapFrog®cares for the planet.
Care for the environment and give your toy a second life by
disposing of it at a small electricals collection point so all its
materials can be recycled.
In the UK:
Visit www.recyclenow.com to see a list of collection points
near you.
In Australia & New Zealand:
Check with you local council for kerbside collections.
Not Recommended for Use in Direct Sunlight:
It is possible that direct sunlight may make it difficult to see
the toy’s lights. If this occurs, simply find a shaded or indoor
area to see the lights better.
PRODUCT FEATURES
1. On/Off/Volume Selector
Slide the On/Off/Volume Selector to turn
the toy on and select the volume.
2. Letter Name Game
Touch to play a lively game that allows
kids to identify letters by their names.

7
3. Letter Sounds Game
Touch to play a phonics game that allows
kids to find letters by the sounds they
make.
4. Counting Game
Touch to have fun counting animal
friends.
5. Animals Game
Build a musical band by finding animals
based on their descriptions, then listen
to your animal buddies rock out!
6. Nature Activities
The first touch activates Weather Report.
The second touch activates Nature
Detective. The third touch activates
Nature Beats.
7. Letter Buttons
Press the Letter Buttons to hear letter
names, letter sounds, animal names and
animal sounds.

8
8. Music Button
Press to hear delightful letter, counting
and nature songs.
9. LED Button
Watch the LED screen to see letter
and number animations. Press the LED
Button to play letter audio or to repeat
questions during games and activities.
10. Automatic Shut-Off
To preserve battery life, the unit will go to sleep mode after
approximately 60 seconds without input. The unit can be
turned on again by touching the LED Button or by turning
the On/Off/Volume Selector off and then back on again.
ACTIVITIES
1. Letter Name Game
Listen to the letter name, then press the correct Letter
Button. See how many questions you can answer correctly
before time runs out.
2. Letter Sounds Game
Listen to the letter sound, then press the correct Letter
Button to fill in the “Sound-o-Meter.”

9
3. Animals Game
Answer three animal questions to recruit members for your
animal band. Then listen to them jam as they layer their
animal sounds over toe-tapping dance beats.
4. Nature Activities
Press the Nature Button to trigger these activities:
Touch 1: Weather Report: Listen to goofy weather updates
from various locales.
Touch 2: Nature Detective: Try to guess the mystery nature
sounds.
Touch 3: Nature Beats: Press the Animal Buttons to hear
the sound they make. Then listen to the animal sounds get
mixed into an energetic dance track.
5. Music
Press the Music Button to hear the ABC Song, the Counting
Song and the Reduce, Reuse, Recycle song.

10
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an
extended period of time.
4. Do not drop the unit on hard surfaces and do not expose
the unit to moisture or water.
TROUBLESHOOTING
If for some reason the program or activity stops working, please
follow these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace
the batteries.
4. Turn the unit back On. The unit should now be ready to
use again.
5. If the unit still does not work, install a new set of batteries.
Environmental Phenomena
The unit may malfunction if subjected to radio-frequency
interference. It should revert to normal operation when the
interference stops. If not, it may become necessary to turn the
power Off and back On, or remove and reinstall the batteries.
In the unlikely event of an electrostatic discharge, the unit may
malfunction and lose memory, requiring the user to reset the
device by removing and reinstalling the batteries.